linux-kernel - [-next v1] riscv: dts: starfive: visionfive 2: Enable usb0 and fix tdm pins sort order

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 28 Aug 2023 19:52:39 +0800
From:   Hal Feng <hal.feng@...rfivetech.com>
To:     Conor Dooley <conor+dt@...nel.org>,
        Emil Renner Berthing <emil.renner.berthing@...onical.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Palmer Dabbelt <palmer@...belt.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Albert Ou <aou@...s.berkeley.edu>
CC:     Hal Feng <hal.feng@...rfivetech.com>, <devicetree@...r.kernel.org>,
        <linux-riscv@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [-next v1] riscv: dts: starfive: visionfive 2: Enable usb0 and fix tdm pins sort order

usb0 was disabled by mistake when merging, so enable it.
tdm_pins node should be sorted alphabetically.

Fixes: e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 49 ++++++++++---------
 1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index d79f94432b27..382dfb5e64e4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -440,30 +440,6 @@ GPOEN_ENABLE,
 		};
 	};
 
-	uart0_pins: uart0-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
-					     GPOEN_ENABLE,
-					     GPI_NONE)>;
-			bias-disable;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(6, GPOUT_LOW,
-					     GPOEN_DISABLE,
-					     GPI_SYS_UART0_RX)>;
-			bias-disable; /* external pull-up */
-			drive-strength = <2>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-	};
-
 	tdm_pins: tdm-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
@@ -497,6 +473,30 @@ GPOEN_DISABLE,
 			input-enable;
 		};
 	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
 };
 
 &tdm {
@@ -513,6 +513,7 @@ &uart0 {
 
 &usb0 {
 	dr_mode = "peripheral";
+	status = "okay";
 };
 
 &U74_1 {
-- 
2.38.1