[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ee16db64-661f-c28c-59ed-d895041f7ea5@quicinc.com>
Date: Thu, 31 Aug 2023 12:34:38 -0700
From: Wesley Cheng <quic_wcheng@...cinc.com>
To: Amadeusz Sławiński
<amadeuszx.slawinski@...ux.intel.com>,
<srinivas.kandagatla@...aro.org>, <mathias.nyman@...el.com>,
<perex@...ex.cz>, <lgirdwood@...il.com>, <andersson@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <gregkh@...uxfoundation.org>,
<Thinh.Nguyen@...opsys.com>, <broonie@...nel.org>,
<bgoswami@...cinc.com>, <tiwai@...e.com>, <robh+dt@...nel.org>,
<agross@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <quic_jackp@...cinc.com>,
<quic_plai@...cinc.com>
Subject: Re: [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6
Hi,
On 8/30/2023 5:50 AM, Amadeusz Sławiński wrote:
> On 8/29/2023 11:06 PM, Wesley Cheng wrote:
>> Create a USB BE component that will register a new USB port to the
>> ASoC USB
>> framework. This will handle determination on if the requested audio
>> profile is supported by the USB device currently selected.
>>
>> Signed-off-by: Wesley Cheng <quic_wcheng@...cinc.com>
>> ---
>> include/sound/q6usboffload.h | 20 ++++
>> sound/soc/qcom/Kconfig | 4 +
>> sound/soc/qcom/qdsp6/Makefile | 1 +
>> sound/soc/qcom/qdsp6/q6usb.c | 200 ++++++++++++++++++++++++++++++++++
>> 4 files changed, 225 insertions(+)
>> create mode 100644 include/sound/q6usboffload.h
>> create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
>>
>> diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h
>> new file mode 100644
>> index 000000000000..4fb1912d9f55
>> --- /dev/null
>> +++ b/include/sound/q6usboffload.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0
>> + *
>> + * linux/sound/q6usboffload.h -- QDSP6 USB offload
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>> rights reserved.
>> + */
>> +
>> +/**
>> + * struct q6usb_offload
>> + * @dev - dev handle to usb be
>> + * @sid - streamID for iommu
>> + * @intr_num - usb interrupter number
>> + * @domain - allocated iommu domain
>> + **/
>> +struct q6usb_offload {
>> + struct device *dev;
>> + long long sid;
>> + u32 intr_num;
>> + struct iommu_domain *domain;
>> +};
>> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
>> index e7b00d1d9e99..bb285af6bb04 100644
>> --- a/sound/soc/qcom/Kconfig
>> +++ b/sound/soc/qcom/Kconfig
>> @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM
>> config SND_SOC_QDSP6_PRM_LPASS_CLOCKS
>> tristate
>> +config SND_SOC_QDSP6_USB
>> + tristate
>> +
>> config SND_SOC_QDSP6_PRM
>> tristate
>> select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
>> @@ -134,6 +137,7 @@ config SND_SOC_QDSP6
>> select SND_SOC_TOPOLOGY
>> select SND_SOC_QDSP6_APM
>> select SND_SOC_QDSP6_PRM
>> + select SND_SOC_QDSP6_USB
>> help
>> To add support for MSM QDSP6 Soc Audio.
>> This will enable sound soc platform specific
>> diff --git a/sound/soc/qcom/qdsp6/Makefile
>> b/sound/soc/qcom/qdsp6/Makefile
>> index 3963bf234664..c9457ee898d0 100644
>> --- a/sound/soc/qcom/qdsp6/Makefile
>> +++ b/sound/soc/qcom/qdsp6/Makefile
>> @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
>> obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
>> obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
>> obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
>> +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
>> diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
>> new file mode 100644
>> index 000000000000..88aa0a64201a
>> --- /dev/null
>> +++ b/sound/soc/qcom/qdsp6/q6usb.c
>> @@ -0,0 +1,200 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All
>> rights reserved.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/iommu.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dma-map-ops.h>
>> +
>> +#include <sound/pcm.h>
>> +#include <sound/soc.h>
>> +#include <sound/soc-usb.h>
>> +#include <sound/pcm_params.h>
>> +#include <sound/asound.h>
>> +#include <sound/q6usboffload.h>
>> +
>> +#include "q6dsp-lpass-ports.h"
>> +#include "q6afe.h"
>> +
>> +#define SID_MASK 0xF
>> +
>> +struct q6usb_port_data {
>> + struct q6afe_usb_cfg usb_cfg;
>> + struct snd_soc_usb *usb;
>> + struct q6usb_offload priv;
>> + int active_idx;
>> +};
>> +
>> +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
>> + SND_SOC_DAPM_HP("USB_RX_BE", NULL),
>> +};
>> +
>> +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
>> + {"USB Playback", NULL, "USB_RX_BE"},
>> +};
>> +
>> +static int q6usb_hw_params(struct snd_pcm_substream *substream,
>> + struct snd_pcm_hw_params *params,
>> + struct snd_soc_dai *dai)
>> +{
>> + return 0;
>> +}
>
> Missing new line after closing bracket between function and following
> struct.
>
Thanks for the review, will fix this.
>> +static const struct snd_soc_dai_ops q6usb_ops = {
>> + .hw_params = q6usb_hw_params,
>> +};
>> +
>> +static struct snd_soc_dai_driver q6usb_be_dais[] = {
>> + {
>> + .playback = {
>> + .stream_name = "USB BE RX",
>> + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
>> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
>> + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
>> + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
>> + SNDRV_PCM_RATE_192000,
>> + .formats = SNDRV_PCM_FMTBIT_S16_LE |
>> SNDRV_PCM_FMTBIT_S16_BE |
>> + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
>> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
>> + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rate_max = 192000,
>> + .rate_min = 8000,
>> + },
>> + .id = USB_RX,
>> + .name = "USB_RX_BE",
>> + .ops = &q6usb_ops,
>> + },
>> +};
>> +
>> +static int q6usb_audio_ports_of_xlate_dai_name(struct
>> snd_soc_component *component,
>> + const struct of_phandle_args *args,
>> + const char **dai_name)
>> +{
>> + int id = args->args[0];
>> + int ret = -EINVAL;
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) {
>
> Double space after second i.
>
Will change.
>> + if (q6usb_be_dais[i].id == id) {
>> + *dai_name = q6usb_be_dais[i].name;
>> + ret = 0;
>> + break;
>> + }
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
>> + struct snd_soc_usb_device *sdev, bool connected)
>> +{
>> + struct q6usb_port_data *data;
>> +
>> + if (!usb->component)
>> + return -ENODEV;
>> +
>> + data = dev_get_drvdata(usb->component->dev);
>> +
>> + if (connected)
>> + /* We only track the latest USB headset plugged in */
>> + data->active_idx = sdev->card_idx;
>
> Maybe add brackets around both comment and code? Not sure what guidance
> there is in such cases, but above code looks weird to me.
>
Sure.
>> +
>> + return 0;
>> +}
>> +
>> +static int q6usb_component_probe(struct snd_soc_component *component)
>> +{
>> + struct q6usb_port_data *data = dev_get_drvdata(component->dev);
>> +
>> + data->usb = snd_soc_usb_add_port(component->dev, &data->priv,
>> q6usb_alsa_connection_cb);
>> + if (IS_ERR(data->usb)) {
>> + dev_err(component->dev, "failed to add usb port\n");
>> + return -ENODEV;
>> + }
>> +
>> + data->usb->component = component;
>> +
>> + return 0;
>> +}
>> +
>> +static void q6usb_component_remove(struct snd_soc_component *component)
>> +{
>> + snd_soc_usb_remove_port(component->dev);
>> +}
>> +
>> +static const struct snd_soc_component_driver q6usb_dai_component = {
>> + .probe = q6usb_component_probe,
>> + .remove = q6usb_component_remove,
>> + .name = "q6usb-dai-component",
>> + .dapm_widgets = q6usb_dai_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
>> + .dapm_routes = q6usb_dapm_routes,
>> + .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
>> + .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
>> +};
>> +
>> +static int q6usb_dai_dev_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + struct q6usb_port_data *data;
>> + struct device *dev = &pdev->dev;
>> + struct of_phandle_args args;
>> + int ret;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
>> + &data->priv.intr_num);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to read intr num.\n");
>> + return ret;
>> + }
>> +
>> + ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
>> + if (ret < 0)
>> + data->priv.sid = -1;
>> + else
>> + data->priv.sid = args.args[0] & SID_MASK;
>> +
>> + data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
>> +
>> + data->priv.dev = dev;
>> + dev_set_drvdata(dev, data);
>> +
>> + return devm_snd_soc_register_component(dev, &q6usb_dai_component,
>> + q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
>> +}
>> +
>> +static int q6usb_dai_dev_remove(struct platform_device *pdev)
>> +{
>> + return 0;
>> +}
>
> Does platform driver really need empty remove function? Remove it.
>
Wasn't too sure about this either, so I included it to be consistent.
Will remove this and add a small comment on why it isn't required..
Thanks
Wesley Cheng
Powered by blists - more mailing lists