[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <faa59811-9d60-6b38-e721-be9a8e8d4749@mediatek.com>
Date: Mon, 11 Sep 2023 19:59:27 +0800
From: Macpaul Lin <macpaul.lin@...iatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
"Rob Herring" <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Bernhard Rosenkränzer <bero@...libre.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
CC: Bear Wang <bear.wang@...iatek.com>,
Pablo Sun <pablo.sun@...iatek.com>,
Macpaul Lin <macpaul@...il.com>, Ben Lok <ben.lok@...iatek.com>
Subject: Re: [PATCH v5 2/2] arm64: dts: mediatek: add device-tree for Genio
1200 EVK board
On 9/11/23 17:09, AngeloGioacchino Del Regno wrote:
> Il 09/09/23 15:28, Macpaul Lin ha scritto:
>> Add basic device-tree for the Genio 1200-EVK board. This board
>> is made by MediaTek and has a MT8395 SoC (MT8195 family),
>> associated with the MT6359 and MT6360 PMICs, and
>> the MT7921 connectivity chip.
>>
>> The IOs available on that board are:
>> * 1 USB Type-C connector with DP aux mode support
>> * 2 USB Type-A connector with a USB hub
>> * 1 micro-USB port for gadget or OTG support
>> * 1 full size HDMI RX and 1 full size HDMI TX connector
>> * 1 micro SD slot
>> * 40 pins header
>> * SPI interface header
>> * 1 M.2 slot
>> * 1 audio jack
>> * 1 micro-USB port for serial debug
>> * 2 connectors for DSI displays, 1 of the DSI panel is installed
>> * 3 connectors for CSI cameras
>> * 1 connector for a eDP panel
>> * 1 MMC storage
>> * 1 Touch Panel (installed DSI display)
>> * 1 M.2 slot for 5G dongle
>>
>> This commit adds basic support in order to be able to boot.
>>
>> Signed-off-by: Ben Lok <ben.lok@...iatek.com>
>> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
>> ---
>> arch/arm64/boot/dts/mediatek/Makefile | 1 +
>> .../dts/mediatek/mt8395-genio-1200-evk.dts | 901 ++++++++++++++++++
>> 2 files changed, 902 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>
>> Changes for v2:
>> - correct SOC binding to "mediatek,mt8395".
>> - Fix a Linux coding style comments for optee node.
>> - Fix wifi fixed 3.3v power's node with "wifi-3v3-regulator".
>> - Fix node name of mt6360 and mt6517 to generic dts name as "pmic".
>> - Remove unecessary blank line.
>> - Reording usb node as the order of "phy" then "host".
>>
>> Changes for v3:
>> - Add back bindings for "mediatek,mt8195".
>> - Fix wifi fixed 3.3v power's node with "regulator-2"
>>
>> Changes for v4:
>> - Fix Makefile and dts file name with prefix "mt8395-".
>> - Re-order all nodes in mt8395-genio-1200-evk.dts by alphabetical
>> order.
>> - Remove unused "DEBUG" node.
>>
>> Changes for v5:
>> - Revise commit message for board's name.
>> - swap the order of nodes 'mt6359_vcamio_ldo_reg' and
>> 'mt6359_vcn33_2_bt_ldo_reg' by alphabetical order.
>> - Reorder some gpio pins by alphabetical order.
>> - audio_default_pins, eth pins, and uart1 pins
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
>> b/arch/arm64/boot/dts/mediatek/Makefile
>> index c99c3372a4b5..10e640c6ae08 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) +=
>> mt8195-cherry-tomato-r3.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> new file mode 100644
>> index 000000000000..5de2d102c577
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> @@ -0,0 +1,901 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (C) 2023 MediaTek Inc.
>> + * Author: Ben Lok <ben.lok@...iatek.com>
>> + * Macpaul Lin <macpaul.lin@...iatek.com>
>> + */
>> +/dts-v1/;
>> +
>> +#include "mt8195.dtsi"
>> +#include "mt6359.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
>> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
>> +#include <dt-bindings/spmi/spmi.h>
>> +#include <dt-bindings/usb/pd.h>
>> +
>> +/ {
>> + model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
>> + compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
>> + "mediatek,mt8195";
>> +
>
>
> ..snip..
>
>> +&spi1 {
>> + pinctrl-0 = <&spi1_pins>;
>> + pinctrl-names = "default";
>> + mediatek,pad-select = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>> + cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
>> +
>> + can0: can@0 {
>> + compatible = "microchip,mcp2518fd";
>> + reg = <0>;
>> + clocks = <&can_clk>;
>> + spi-max-frequency = <20000000>;
>> + interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
>> + vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
>> + xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
>> + };
>> +};
>> +
>> +&spi2 {
>> + pinctrl-0 = <&spi2_pins>;
>> + pinctrl-names = "default";
>> + mediatek,pad-select = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>> +};
>> +
>> +&u3phy0 {
>> + status = "okay";
>> +};
>> +
>> +&u3phy1 {
>> + status = "okay";
>> +};
>> +
>> +&u3phy2 {
>> + status = "okay";
>> +};
>> +
>> +&u3phy3 {
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + pinctrl-0 = <&uart0_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&uart1 {
>> + pinctrl-0 = <&uart1_pins>;
>> + pinctrl-names = "default";
>> + status = "okay";
>> +};
>> +
>> +&ufsphy {
>> + status = "disabled";
>> +};
>> +
>> +&spmi {
>
> spmi goes before u3phy0, after spi2.
>
> after fixing:
> Reviewed-by: AngeloGioacchino Del Regno
> <angelogioacchino.delregno@...labora.com>
>
Sorry, this part is missing in patch v5.
Now it is fixed in v6.
Thanks!
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + mt6315_6: pmic@6 {
>> + compatible = "mediatek,mt6315-regulator";
>> + reg = <0x6 SPMI_USID>;
>> +
>> + regulators {
>> + mt6315_6_vbuck1: vbuck1 {
>> + regulator-compatible = "vbuck1";
>> + regulator-name = "Vbcpu";
>> + regulator-min-microvolt = <300000>;
>> + regulator-max-microvolt = <1193750>;
>> + regulator-enable-ramp-delay = <256>;
>> + regulator-allowed-modes = <0 1 2>;
>> + regulator-always-on;
>> + };
>> + };
>> + };
>> +
>> + mt6315_7: pmic@7 {
>> + compatible = "mediatek,mt6315-regulator";
>> + reg = <0x7 SPMI_USID>;
>> +
>> + regulators {
>> + mt6315_7_vbuck1: vbuck1 {
>> + regulator-compatible = "vbuck1";
>> + regulator-name = "Vgpu";
>> + regulator-min-microvolt = <300000>;
>> + regulator-max-microvolt = <1193750>;
>> + regulator-enable-ramp-delay = <256>;
>> + regulator-allowed-modes = <0 1 2>;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&xhci0 {
>> + status = "okay";
>> +};
>> +
>> +&xhci1 {
>> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
>> + status = "okay";
>> +};
>> +
>> +&xhci2 {
>> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
>> + status = "okay";
>> +};
>> +
>> +&xhci3 {
>> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
>> + status = "okay";
>> +};
>
>
Best Regards,
Macpaul Lin
Powered by blists - more mailing lists