[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8b9e863b-35f6-7b86-d4b7-cb01ddad0958@collabora.com>
Date: Mon, 11 Sep 2023 11:09:40 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Macpaul Lin <macpaul.lin@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Bernhard Rosenkränzer <bero@...libre.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Cc: Bear Wang <bear.wang@...iatek.com>,
Pablo Sun <pablo.sun@...iatek.com>,
Macpaul Lin <macpaul@...il.com>, Ben Lok <ben.lok@...iatek.com>
Subject: Re: [PATCH v5 2/2] arm64: dts: mediatek: add device-tree for Genio
1200 EVK board
Il 09/09/23 15:28, Macpaul Lin ha scritto:
> Add basic device-tree for the Genio 1200-EVK board. This board
> is made by MediaTek and has a MT8395 SoC (MT8195 family),
> associated with the MT6359 and MT6360 PMICs, and
> the MT7921 connectivity chip.
>
> The IOs available on that board are:
> * 1 USB Type-C connector with DP aux mode support
> * 2 USB Type-A connector with a USB hub
> * 1 micro-USB port for gadget or OTG support
> * 1 full size HDMI RX and 1 full size HDMI TX connector
> * 1 micro SD slot
> * 40 pins header
> * SPI interface header
> * 1 M.2 slot
> * 1 audio jack
> * 1 micro-USB port for serial debug
> * 2 connectors for DSI displays, 1 of the DSI panel is installed
> * 3 connectors for CSI cameras
> * 1 connector for a eDP panel
> * 1 MMC storage
> * 1 Touch Panel (installed DSI display)
> * 1 M.2 slot for 5G dongle
>
> This commit adds basic support in order to be able to boot.
>
> Signed-off-by: Ben Lok <ben.lok@...iatek.com>
> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> .../dts/mediatek/mt8395-genio-1200-evk.dts | 901 ++++++++++++++++++
> 2 files changed, 902 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>
> Changes for v2:
> - correct SOC binding to "mediatek,mt8395".
> - Fix a Linux coding style comments for optee node.
> - Fix wifi fixed 3.3v power's node with "wifi-3v3-regulator".
> - Fix node name of mt6360 and mt6517 to generic dts name as "pmic".
> - Remove unecessary blank line.
> - Reording usb node as the order of "phy" then "host".
>
> Changes for v3:
> - Add back bindings for "mediatek,mt8195".
> - Fix wifi fixed 3.3v power's node with "regulator-2"
>
> Changes for v4:
> - Fix Makefile and dts file name with prefix "mt8395-".
> - Re-order all nodes in mt8395-genio-1200-evk.dts by alphabetical order.
> - Remove unused "DEBUG" node.
>
> Changes for v5:
> - Revise commit message for board's name.
> - swap the order of nodes 'mt6359_vcamio_ldo_reg' and
> 'mt6359_vcn33_2_bt_ldo_reg' by alphabetical order.
> - Reorder some gpio pins by alphabetical order.
> - audio_default_pins, eth pins, and uart1 pins
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index c99c3372a4b5..10e640c6ae08 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> new file mode 100644
> index 000000000000..5de2d102c577
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
> @@ -0,0 +1,901 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + * Author: Ben Lok <ben.lok@...iatek.com>
> + * Macpaul Lin <macpaul.lin@...iatek.com>
> + */
> +/dts-v1/;
> +
> +#include "mt8195.dtsi"
> +#include "mt6359.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/usb/pd.h>
> +
> +/ {
> + model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
> + compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
> + "mediatek,mt8195";
> +
..snip..
> +&spi1 {
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> + mediatek,pad-select = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> + cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
> +
> + can0: can@0 {
> + compatible = "microchip,mcp2518fd";
> + reg = <0>;
> + clocks = <&can_clk>;
> + spi-max-frequency = <20000000>;
> + interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
> + xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
> + };
> +};
> +
> +&spi2 {
> + pinctrl-0 = <&spi2_pins>;
> + pinctrl-names = "default";
> + mediatek,pad-select = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +};
> +
> +&u3phy0 {
> + status = "okay";
> +};
> +
> +&u3phy1 {
> + status = "okay";
> +};
> +
> +&u3phy2 {
> + status = "okay";
> +};
> +
> +&u3phy3 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&ufsphy {
> + status = "disabled";
> +};
> +
> +&spmi {
spmi goes before u3phy0, after spi2.
after fixing:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + mt6315_6: pmic@6 {
> + compatible = "mediatek,mt6315-regulator";
> + reg = <0x6 SPMI_USID>;
> +
> + regulators {
> + mt6315_6_vbuck1: vbuck1 {
> + regulator-compatible = "vbuck1";
> + regulator-name = "Vbcpu";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-enable-ramp-delay = <256>;
> + regulator-allowed-modes = <0 1 2>;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + mt6315_7: pmic@7 {
> + compatible = "mediatek,mt6315-regulator";
> + reg = <0x7 SPMI_USID>;
> +
> + regulators {
> + mt6315_7_vbuck1: vbuck1 {
> + regulator-compatible = "vbuck1";
> + regulator-name = "Vgpu";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-enable-ramp-delay = <256>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + };
> + };
> +};
> +
> +&xhci0 {
> + status = "okay";
> +};
> +
> +&xhci1 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&xhci2 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
> +
> +&xhci3 {
> + vusb33-supply = <&mt6359_vusb_ldo_reg>;
> + status = "okay";
> +};
Powered by blists - more mailing lists