lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230911140959.2046340-1-longqi90@gmail.com>
Date:   Mon, 11 Sep 2023 22:09:59 +0800
From:   longqi <longqi90@...il.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Samuel Holland <samuel@...lland.org>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Allwinner
        sunXi SoC support),
        linux-sunxi@...ts.linux.dev (open list:ARM/Allwinner sunXi SoC support),
        linux-kernel@...r.kernel.org (open list)
Cc:     longqi <longqi90@...il.com>
Subject: [PATCH] fixes the pin settings of two LEDs on board nanopi neo plus2

Signed-off-by: longqi <longqi90@...il.com>
---
 .../boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921ac236c..0cb7a07ab1de 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -26,14 +26,15 @@ leds {
 		compatible = "gpio-leds";
 
 		led-0 {
-			label = "nanopi:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			linux,default-trigger = "default-on";
 		};
 
 		led-1 {
-			label = "nanopi:red:status";
-			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ