[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230912113403.00006c39@Huawei.com>
Date: Tue, 12 Sep 2023 11:34:03 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
CC: <linux-pci@...r.kernel.org>, Bjorn Helgaas <helgaas@...nel.org>,
"Jesse Brandeburg" <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
"Eric Dumazet" <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
"Paolo Abeni" <pabeni@...hat.com>,
<intel-wired-lan@...ts.osuosl.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/8] igb: Use FIELD_GET() to extract Link Width
On Mon, 11 Sep 2023 15:14:56 +0300
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com> wrote:
> Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
> custom masking and shifting.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> ---
> drivers/net/ethernet/intel/igb/e1000_mac.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
> index caf91c6f52b4..5a23b9cfec6c 100644
> --- a/drivers/net/ethernet/intel/igb/e1000_mac.c
> +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> /* Copyright(c) 2007 - 2018 Intel Corporation. */
>
> +#include <linux/bitfield.h>
> #include <linux/if_ether.h>
> #include <linux/delay.h>
> #include <linux/pci.h>
> @@ -50,9 +51,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
> break;
> }
>
> - bus->width = (enum e1000_bus_width)((pcie_link_status &
> - PCI_EXP_LNKSTA_NLW) >>
> - PCI_EXP_LNKSTA_NLW_SHIFT);
> + bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
> + pcie_link_status);
This cast is a bit ugly given it takes the values 0, 1, 2, 3 and
we extra a field that the spec says contains 1, 2, 4, 8 etc
Hence it only works because only 1 and 2 are used I think... Not nice.
Also, whilst looking at this I note that e1000e has it's own defines
for PCIE_LINK_WIDTH_MASK and PCIE_LINK_WIDTH_SHIFT
Looks like those should be changed to use the standard defines.
For extra giggles there are two e1000_bus_width enum definitions in different
headers.
Actual patch is good - just 'interesting' stuff noticed whilst looking at it :)
Jonathan
> }
>
> reg = rd32(E1000_STATUS);
Powered by blists - more mailing lists