[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <942077c8-a44a-5831-55b-afceb4412c2@linux.intel.com>
Date: Tue, 12 Sep 2023 15:11:28 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Jonathan Cameron <Jonathan.Cameron@...wei.com>
cc: linux-pci@...r.kernel.org, Bjorn Helgaas <helgaas@...nel.org>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
intel-wired-lan@...ts.osuosl.org, Netdev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/8] igb: Use FIELD_GET() to extract Link Width
On Tue, 12 Sep 2023, Jonathan Cameron wrote:
> On Mon, 11 Sep 2023 15:14:56 +0300
> Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com> wrote:
>
> > Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
> > custom masking and shifting.
> >
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> > ---
> > drivers/net/ethernet/intel/igb/e1000_mac.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
> > index caf91c6f52b4..5a23b9cfec6c 100644
> > --- a/drivers/net/ethernet/intel/igb/e1000_mac.c
> > +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
> > @@ -1,6 +1,7 @@
> > // SPDX-License-Identifier: GPL-2.0
> > /* Copyright(c) 2007 - 2018 Intel Corporation. */
> >
> > +#include <linux/bitfield.h>
> > #include <linux/if_ether.h>
> > #include <linux/delay.h>
> > #include <linux/pci.h>
> > @@ -50,9 +51,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
> > break;
> > }
> >
> > - bus->width = (enum e1000_bus_width)((pcie_link_status &
> > - PCI_EXP_LNKSTA_NLW) >>
> > - PCI_EXP_LNKSTA_NLW_SHIFT);
> > + bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
> > + pcie_link_status);
>
> This cast is a bit ugly given it takes the values 0, 1, 2, 3 and
> we extra a field that the spec says contains 1, 2, 4, 8 etc
> Hence it only works because only 1 and 2 are used I think... Not nice.
Not perfect but I guess the enum definition could use
PCI_EXP_LNKSTA_NLW_X* to ensure at least the PCIe ones match.
> Also, whilst looking at this I note that e1000e has it's own defines
> for PCIE_LINK_WIDTH_MASK and PCIE_LINK_WIDTH_SHIFT
>
> Looks like those should be changed to use the standard defines.
Yes, thanks. I added a patch to address those duplicated defines and
I also noticed it had a duplicated copy for PCI_EXP_LNKSTA which I also
converted.
I'll send v2 which has most of your suggestions taken into account once
the build bot has done its thing.
> For extra giggles there are two e1000_bus_width enum definitions in different
> headers.
No, there are actually 3 if one looks carefully, and many more if the
ones named according to the driver are also counted all following this
same "not nice" pattern. ;-)
That's 3 different drivers though which just happen to be similarly named
so it's not entirely fair as it would be same as saying drivers x, y, and
z have something with the same name. It's pretty obviously those come from
copy paste though which usually means some common code might have been
handy.
> Actual patch is good - just 'interesting' stuff noticed whilst looking
> at it :)
Yeah, I've plenty of 'interesting' stuff I've noticed while looking around
on my todo list. I even thought I had that general PCI_EXP_* FIELD_GET()
cleanup on it as I recall eyeing what it would take to find all of them
but it seems I never added that there (now it is).
But then I was taking a look at these Link Width ones and there was just
so much low-hanging fruit (some of which are like you put it, an
excellent example of good cleanup) so I went to do that right away
without considering all the other fields.
Thanks a lot for taking a look.
--
i.
Powered by blists - more mailing lists