linux-kernel - Re: [PATCH v2 8/8] arm64: defconfig: enable interconnect and pinctrl for SM4450

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 15 Sep 2023 19:21:39 -0700
From:   Trilok Soni <quic_tsoni@...cinc.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Tengfei Fan <quic_tengfan@...cinc.com>, <will@...nel.org>,
        <robin.murphy@....com>, <joro@...tes.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>, <catalin.marinas@....com>
CC:     <geert+renesas@...der.be>, <arnd@...db.de>,
        <neil.armstrong@...aro.org>, <nfraprado@...labora.com>,
        <rafal@...ecki.pl>, <peng.fan@....com>,
        <linux-arm-kernel@...ts.infradead.org>, <iommu@...ts.linux.dev>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <quic_shashim@...cinc.com>,
        <quic_kaushalk@...cinc.com>, <quic_tdas@...cinc.com>,
        <quic_tingweiz@...cinc.com>, <quic_aiquny@...cinc.com>,
        <kernel@...cinc.com>
Subject: Re: [PATCH v2 8/8] arm64: defconfig: enable interconnect and pinctrl
 for SM4450

On 9/15/2023 4:29 AM, Krzysztof Kozlowski wrote:
> On 15/09/2023 13:18, Tengfei Fan wrote:
>>
>>
>> 在 9/15/2023 5:16 PM, Krzysztof Kozlowski 写道:
>>> On 15/09/2023 11:12, Tengfei Fan wrote:
>>>>
>>>>
>>>> 在 9/15/2023 3:21 PM, Krzysztof Kozlowski 写道:
>>>>> On 15/09/2023 04:15, Tengfei Fan wrote:
>>>>>> Add the SM4450 interconnect and pinctrl drivers as built-in for
>>>>>> support the Qualcomm SM4450 platform to boot to uart shell.
>>>>>>
>>>>>> Signed-off-by: Tengfei Fan <quic_tengfan@...cinc.com>
>>>>>> ---
>>>>>>    arch/arm64/configs/defconfig | 2 ++
>>>>>>    1 file changed, 2 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>>>>>> index ec59174b14db..e91993de865e 100644
>>>>>> --- a/arch/arm64/configs/defconfig
>>>>>> +++ b/arch/arm64/configs/defconfig
>>>>>> @@ -598,6 +598,7 @@ CONFIG_PINCTRL_SC8280XP=y
>>>>>>    CONFIG_PINCTRL_SDM660=y
>>>>>>    CONFIG_PINCTRL_SDM670=y
>>>>>>    CONFIG_PINCTRL_SDM845=y
>>>>>> +CONFIG_PINCTRL_SM4450=y
>>>>>>    CONFIG_PINCTRL_SM6115=y
>>>>>>    CONFIG_PINCTRL_SM6125=y
>>>>>>    CONFIG_PINCTRL_SM6350=y
>>>>>> @@ -1500,6 +1501,7 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y
>>>>>>    CONFIG_INTERCONNECT_QCOM_SC8180X=y
>>>>>>    CONFIG_INTERCONNECT_QCOM_SC8280XP=y
>>>>>>    CONFIG_INTERCONNECT_QCOM_SDM845=y
>>>>>> +CONFIG_INTERCONNECT_QCOM_SM4450=y
>>>>>
>>>>> Why it cannot be =m?
>>>>>
>>>>> Best regards,
>>>>> Krzysztof
>>>>>
>>>>
>>>> Hi Krzysztof,
>>>> Because system haven't capacity of loading ko files at this time on
>>>> SM4450 platform, so setting to "Y".
>>>
>>> Hm? System has this capability. All systems have. What is so different
>>> on SM4450 comparing to everything else we have here?
>>>
>>> No, this should be =m and you need to fix your system.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>> Hi Krzysztof,
>> Find new way which can load ko files on SM4450 platform, still need use 
>> "Y", because of some other modules have dependence to these two config, 
>> like scm, smmu module drivers, uart shell console cannot be got if set 
>> to "m".
> 
> That's what I am asking, which device exactly needs it.
> 
>>
>> Also do test for setting these two config to "m" on SM8450 platform, get 
>> uart shell consle failed if so setting.
> 
> Yeah, this we know, I did this. I am asking about SM4450.

Why we have =m requirement when other drivers above are =Y?. Can we confirm
w/ Georgi? I am not aware that Interconnect drivers needs to be =m only.

CONFIG_INTERCONNECT_QCOM_SC8180X=y
CONFIG_INTERCONNECT_QCOM_SC8280XP=y
CONFIG_INTERCONNECT_QCOM_SDM845=y

-- 
---Trilok Soni