[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAK00qKDnG1o6ZxzY=pGs0J7o_RYYsr1XHxJKirRKeghsp6QOBg@mail.gmail.com>
Date: Tue, 19 Sep 2023 15:10:01 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: ulf.hansson@...aro.org, adrian.hunter@...el.com,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, kangzhen.lou@...l.com,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: Re: [PATCH V1] mmc: sdhci-pci-gli: GL975[05]: Mask the replay timer
timeout of AER
On Tue, Sep 19, 2023 at 12:24 PM Kai-Heng Feng
<kai.heng.feng@...onical.com> wrote:
>
> Hi Victor,
>
> On Mon, Sep 18, 2023 at 6:31 PM Victor Shih <victorshihgli@...il.com> wrote:
> >
> > From: Victor Shih <victor.shih@...esyslogic.com.tw>
> >
> > Due to a flaw in the hardware design, the GL975x replay timer frequently
> > times out when ASPM is enabled. As a result, the system will resume
> > immediately when it enters suspend. Therefore, the replay timer
> > timeout must be masked.
>
> This patch solves AER error when its PCI config gets accessed, but the
> AER still happens at system suspend:
>
> [ 1100.103603] ACPI: EC: interrupt blocked
> [ 1100.268244] ACPI: EC: interrupt unblocked
> [ 1100.326960] pcieport 0000:00:1c.0: AER: Corrected error received:
> 0000:00:1c.0
> [ 1100.326991] pcieport 0000:00:1c.0: PCIe Bus Error:
> severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 1100.326993] pcieport 0000:00:1c.0: device [8086:7ab9] error
> status/mask=00001000/00002000
> [ 1100.326996] pcieport 0000:00:1c.0: [12] Timeout
>
> Kai-Heng
>
Hi, Kai-Heng
Could you try applying the patch and re-testing again after restarting
the system?
Because I applied the patch and restarted the system and it didn't happen.
The system can enter suspend normally.
If you still have the issue after following the above instructions,
please provide me with your environment and I will verify it again.
Thanks, Victor Shih
> >
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > ---
> > drivers/mmc/host/sdhci-pci-gli.c | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index d83261e857a5..d8a991b349a8 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -28,6 +28,9 @@
> > #define PCI_GLI_9750_PM_CTRL 0xFC
> > #define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
> >
> > +#define PCI_GLI_9750_CORRERR_MASK 0x214
> > +#define PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
> > +
> > #define SDHCI_GLI_9750_CFG2 0x848
> > #define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
> > #define GLI_9750_CFG2_L1DLY_VALUE 0x1F
> > @@ -152,6 +155,9 @@
> > #define PCI_GLI_9755_PM_CTRL 0xFC
> > #define PCI_GLI_9755_PM_STATE GENMASK(1, 0)
> >
> > +#define PCI_GLI_9755_CORRERR_MASK 0x214
> > +#define PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
> > +
> > #define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
> > #define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
> >
> > @@ -561,6 +567,11 @@ static void gl9750_hw_setting(struct sdhci_host *host)
> > value &= ~PCI_GLI_9750_PM_STATE;
> > pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> >
> > + /* mask the replay timer timeout of AER */
> > + pci_read_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, &value);
> > + value |= PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
> > + pci_write_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, value);
> > +
> > gl9750_wt_off(host);
> > }
> >
> > @@ -770,6 +781,11 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
> > value &= ~PCI_GLI_9755_PM_STATE;
> > pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> >
> > + /* mask the replay timer timeout of AER */
> > + pci_read_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, &value);
> > + value |= PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
> > + pci_write_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, value);
> > +
> > gl9755_wt_off(pdev);
> > }
> >
> > --
> > 2.25.1
> >
Powered by blists - more mailing lists