[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAd53p6cgN7QDZXzTsw_DVgOmpv46DY+Ttom5V0vTBVn2jpUQg@mail.gmail.com>
Date: Tue, 19 Sep 2023 15:31:16 +0800
From: Kai-Heng Feng <kai.heng.feng@...onical.com>
To: Victor Shih <victorshihgli@...il.com>
Cc: ulf.hansson@...aro.org, adrian.hunter@...el.com,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, kangzhen.lou@...l.com,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: Re: [PATCH V1] mmc: sdhci-pci-gli: GL975[05]: Mask the replay timer
timeout of AER
Hi Victor,
On Tue, Sep 19, 2023 at 3:10 PM Victor Shih <victorshihgli@...il.com> wrote:
>
> On Tue, Sep 19, 2023 at 12:24 PM Kai-Heng Feng
> <kai.heng.feng@...onical.com> wrote:
> >
> > Hi Victor,
> >
> > On Mon, Sep 18, 2023 at 6:31 PM Victor Shih <victorshihgli@...il.com> wrote:
> > >
> > > From: Victor Shih <victor.shih@...esyslogic.com.tw>
> > >
> > > Due to a flaw in the hardware design, the GL975x replay timer frequently
> > > times out when ASPM is enabled. As a result, the system will resume
> > > immediately when it enters suspend. Therefore, the replay timer
> > > timeout must be masked.
> >
> > This patch solves AER error when its PCI config gets accessed, but the
> > AER still happens at system suspend:
> >
> > [ 1100.103603] ACPI: EC: interrupt blocked
> > [ 1100.268244] ACPI: EC: interrupt unblocked
> > [ 1100.326960] pcieport 0000:00:1c.0: AER: Corrected error received:
> > 0000:00:1c.0
> > [ 1100.326991] pcieport 0000:00:1c.0: PCIe Bus Error:
> > severity=Corrected, type=Data Link Layer, (Transmitter ID)
> > [ 1100.326993] pcieport 0000:00:1c.0: device [8086:7ab9] error
> > status/mask=00001000/00002000
> > [ 1100.326996] pcieport 0000:00:1c.0: [12] Timeout
> >
> > Kai-Heng
> >
>
> Hi, Kai-Heng
>
> Could you try applying the patch and re-testing again after restarting
> the system?
Same issue happens after coldboot.
> Because I applied the patch and restarted the system and it didn't happen.
> The system can enter suspend normally.
>
> If you still have the issue after following the above instructions,
> please provide me with your environment and I will verify it again.
The patch gets applied on top of next-20230918. Please let me know
what else you want to know.
Kai-Heng
>
> Thanks, Victor Shih
>
> > >
> > > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > > ---
> > > drivers/mmc/host/sdhci-pci-gli.c | 16 ++++++++++++++++
> > > 1 file changed, 16 insertions(+)
> > >
> > > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > > index d83261e857a5..d8a991b349a8 100644
> > > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > > @@ -28,6 +28,9 @@
> > > #define PCI_GLI_9750_PM_CTRL 0xFC
> > > #define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
> > >
> > > +#define PCI_GLI_9750_CORRERR_MASK 0x214
> > > +#define PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
> > > +
> > > #define SDHCI_GLI_9750_CFG2 0x848
> > > #define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
> > > #define GLI_9750_CFG2_L1DLY_VALUE 0x1F
> > > @@ -152,6 +155,9 @@
> > > #define PCI_GLI_9755_PM_CTRL 0xFC
> > > #define PCI_GLI_9755_PM_STATE GENMASK(1, 0)
> > >
> > > +#define PCI_GLI_9755_CORRERR_MASK 0x214
> > > +#define PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
> > > +
> > > #define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
> > > #define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
> > >
> > > @@ -561,6 +567,11 @@ static void gl9750_hw_setting(struct sdhci_host *host)
> > > value &= ~PCI_GLI_9750_PM_STATE;
> > > pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> > >
> > > + /* mask the replay timer timeout of AER */
> > > + pci_read_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, &value);
> > > + value |= PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
> > > + pci_write_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, value);
> > > +
> > > gl9750_wt_off(host);
> > > }
> > >
> > > @@ -770,6 +781,11 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
> > > value &= ~PCI_GLI_9755_PM_STATE;
> > > pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> > >
> > > + /* mask the replay timer timeout of AER */
> > > + pci_read_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, &value);
> > > + value |= PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
> > > + pci_write_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, value);
> > > +
> > > gl9755_wt_off(pdev);
> > > }
> > >
> > > --
> > > 2.25.1
> > >
Powered by blists - more mailing lists