[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJppuxn94o01Us-xdJAP4dVeH3Gp=bSrKrJPtJ4N=72G2fA@mail.gmail.com>
Date: Tue, 19 Sep 2023 12:44:12 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Kuogee Hsieh <quic_khsieh@...cinc.com>
Cc: dri-devel@...ts.freedesktop.org, robdclark@...il.com,
sean@...rly.run, swboyd@...omium.org, dianders@...omium.org,
vkoul@...nel.org, daniel@...ll.ch, airlied@...il.com,
agross@...nel.org, andersson@...nel.org, quic_abhinavk@...cinc.com,
quic_jesszhan@...cinc.com, quic_sbillaka@...cinc.com,
marijn.suijten@...ainline.org, freedreno@...ts.freedesktop.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/7] drm/msm/dp: tie dp_display_irq_handler() with dp driver
On Mon, 18 Sept 2023 at 20:03, Kuogee Hsieh <quic_khsieh@...cinc.com> wrote:
>
>
> On 9/15/2023 5:29 PM, Dmitry Baryshkov wrote:
> > On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh@...cinc.com> wrote:
> >> Currently the dp_display_irq_handler() is executed at msm_dp_modeset_init()
> >> which ties irq registration to the DPU device's life cycle, while depending on
> >> resources that are released as the DP device is torn down. Move register DP
> >> driver irq handler at dp_display_probe() to have dp_display_irq_handler()
> >> is tied with DP device.
> >>
> >> Changes in v3:
> >> -- move calling dp_display_irq_handler() to probe
> > Was there a changelog for the previous reivions? What is the
> > difference between v1 and v2?
>
> Sorry, v2 is same as v3.
>
> I submitted v2 first but found i forget to add change logs from review
> comments of v1.
>
> Therefore i submit v3 to add changes logs which missing at v2.
This doesn't consist of a change. It should have been a RESEND or just
responding with the changelog. V3 means new revision.
>
>
>
> >
> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
> >> ---
> >> drivers/gpu/drm/msm/dp/dp_display.c | 35 +++++++++++++----------------------
> >> drivers/gpu/drm/msm/dp/dp_display.h | 1 -
> >> 2 files changed, 13 insertions(+), 23 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> >> index 76f1395..c217430 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >> @@ -1193,30 +1193,23 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
> >> return ret;
> >> }
> >>
> >> -int dp_display_request_irq(struct msm_dp *dp_display)
> >> +static int dp_display_request_irq(struct dp_display_private *dp)
> >> {
> >> int rc = 0;
> >> - struct dp_display_private *dp;
> >> -
> >> - if (!dp_display) {
> >> - DRM_ERROR("invalid input\n");
> >> - return -EINVAL;
> >> - }
> >> -
> >> - dp = container_of(dp_display, struct dp_display_private, dp_display);
> >> + struct device *dev = &dp->pdev->dev;
> >>
> >> - dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> >> if (!dp->irq) {
> > What is the point in this check?
> >
> >> - DRM_ERROR("failed to get irq\n");
> >> - return -EINVAL;
> >> + dp->irq = platform_get_irq(dp->pdev, 0);
> >> + if (!dp->irq) {
> >> + DRM_ERROR("failed to get irq\n");
> >> + return -EINVAL;
> >> + }
> >> }
> >>
> >> - rc = devm_request_irq(dp_display->drm_dev->dev, dp->irq,
> >> - dp_display_irq_handler,
> >> + rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler,
> >> IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> >> if (rc < 0) {
> >> - DRM_ERROR("failed to request IRQ%u: %d\n",
> >> - dp->irq, rc);
> >> + DRM_ERROR("failed to request IRQ%u: %d\n", dp->irq, rc);
> >> return rc;
> >> }
> >>
> >> @@ -1287,6 +1280,10 @@ static int dp_display_probe(struct platform_device *pdev)
> >>
> >> platform_set_drvdata(pdev, &dp->dp_display);
> >>
> >> + rc = dp_display_request_irq(dp);
> >> + if (rc)
> >> + return rc;
> > This way the IRQ ends up being enabled in _probe. Are we ready to
> > handle it here? Is the DP device fully setup at this moment?
> >
> >> +
> >> rc = component_add(&pdev->dev, &dp_display_comp_ops);
> >> if (rc) {
> >> DRM_ERROR("component add failed, rc=%d\n", rc);
> >> @@ -1549,12 +1546,6 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> >>
> >> dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
> >>
> >> - ret = dp_display_request_irq(dp_display);
> >> - if (ret) {
> >> - DRM_ERROR("request_irq failed, ret=%d\n", ret);
> >> - return ret;
> >> - }
> >> -
> >> ret = dp_display_get_next_bridge(dp_display);
> >> if (ret)
> >> return ret;
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> >> index 1e9415a..b3c08de 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> >> @@ -35,7 +35,6 @@ struct msm_dp {
> >> int dp_display_set_plugged_cb(struct msm_dp *dp_display,
> >> hdmi_codec_plugged_cb fn, struct device *codec_dev);
> >> int dp_display_get_modes(struct msm_dp *dp_display);
> >> -int dp_display_request_irq(struct msm_dp *dp_display);
> >> bool dp_display_check_video_test(struct msm_dp *dp_display);
> >> int dp_display_get_test_bpp(struct msm_dp *dp_display);
> >> void dp_display_signal_audio_start(struct msm_dp *dp_display);
> >> --
> >> 2.7.4
> >>
> >
--
With best wishes
Dmitry
Powered by blists - more mailing lists