[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230921193224.l3ojpdcsb4bpfl7d@skbuf>
Date: Thu, 21 Sep 2023 22:32:24 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Lukasz Majewski <lukma@...x.de>
Cc: Tristram.Ha@...rochip.com, Eric Dumazet <edumazet@...gle.com>,
Andrew Lunn <andrew@...n.ch>, davem@...emloft.net,
Woojung Huh <woojung.huh@...rochip.com>,
Oleksij Rempel <o.rempel@...gutronix.de>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, UNGLinuxDriver@...rochip.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Vladimir Oltean <vladimir.oltean@....com>
Subject: Re: [PATCH v5 net-next 5/5] net: dsa: microchip: Enable HSR
offloading for KSZ9477
On Wed, Sep 20, 2023 at 01:43:43PM +0200, Lukasz Majewski wrote:
> +void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr)
> +{
> + struct ksz_device *dev = ds->priv;
> + struct net_device *slave;
> + u8 data;
> +
> + /* Program which port(s) shall support HSR */
> + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port));
> +
> + /* Forward frames between HSR ports (i.e. bridge together HSR ports) */
> + ksz9477_cfg_port_member(dev, port,
> + BIT(dsa_upstream_port(ds, port)) | BIT(port));
Isn't this supposed to be
ksz9477_cfg_port_member(dev, port,
BIT(dsa_upstream_port(ds, port)) | BIT(pair));
where "pair" is not even passed as an argument to ksz9477_hsr_join(),
but represents the *other* port in the HSR ring, not this one?
> +
> + if (!dev->hsr_ports) {
> + /* Enable discarding of received HSR frames */
> + ksz_read8(dev, REG_HSR_ALU_CTRL_0__1, &data);
> + data |= HSR_DUPLICATE_DISCARD;
> + data &= ~HSR_NODE_UNICAST;
> + ksz_write8(dev, REG_HSR_ALU_CTRL_0__1, data);
> + }
> +
> + /* Enable per port self-address filtering.
> + * The global self-address filtering has already been enabled in the
> + * ksz9477_reset_switch() function.
> + */
> + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, true);
> +
> + /* Setup HW supported features for lan HSR ports */
> + slave = dsa_to_port(ds, port)->slave;
> + slave->features |= KSZ9477_SUPPORTED_HSR_FEATURES;
> +}
> diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
> index 1f3fb6c23f36..1f447a34f555 100644
> --- a/drivers/net/dsa/microchip/ksz_common.h
> +++ b/drivers/net/dsa/microchip/ksz_common.h
> @@ -101,6 +101,11 @@ struct ksz_ptp_irq {
> int num;
> };
>
> +struct ksz_switch_macaddr {
> + unsigned char addr[ETH_ALEN];
> + refcount_t refcount;
> +};
> +
> struct ksz_port {
> bool remove_tag; /* Remove Tag flag set, for ksz8795 only */
> bool learning;
> @@ -169,6 +174,10 @@ struct ksz_device {
> struct mutex lock_irq; /* IRQ Access */
> struct ksz_irq girq;
> struct ksz_ptp_data ptp_data;
> +
> + struct ksz_switch_macaddr *switch_macaddr;
> + struct net_device *hsr_dev; /* HSR */
Please be consistent with the lines above, and use tabs to align the "/* HSR */"
comment.
> + u8 hsr_ports;
> };
>
> /* List of supported models */
> --
> 2.20.1
>
Powered by blists - more mailing lists