| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230921181904.GA750881-robh@kernel.org>
Date: Thu, 21 Sep 2023 13:19:04 -0500
From: Rob Herring <robh@...nel.org>
To: Alvin Šipraga <alvin@...s.dk>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
�ipraga <alsi@...g-olufsen.dk>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Rabeeh Khoury <rabeeh@...id-run.com>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] dt-bindings: clock: si5351: convert to yaml
On Wed, Sep 20, 2023 at 03:09:53PM +0200, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@...g-olufsen.dk>
>
> The following additional properties are described:
>
> - clock-names
> - clock-frequency of the clkout child nodes
>
> In order to suppress warnings from the DT schema validator, the clkout
> child nodes are prescribed names clkout@[0-7] rather than clkout[0-7].
> The latter form is still admissible but the example has been changed to
> use the former.
>
> The example is refined as follows:
>
> - correct the usage of property pll-master -> silabs,pll-master
> - give an example of how the silabs,pll-reset property can be used
>
> I made myself maintainer of the file as I cannot presume that anybody
> else wants the responsibility.
>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> Cc: Rabeeh Khoury <rabeeh@...id-run.com>
> Signed-off-by: Alvin Šipraga <alsi@...g-olufsen.dk>
> ---
> .../bindings/clock/silabs,si5351.txt | 126 ---------
> .../bindings/clock/silabs,si5351.yaml | 251 ++++++++++++++++++
> 2 files changed, 251 insertions(+), 126 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.txt
> create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
> deleted file mode 100644
> index bfda6af76bee..000000000000
> --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
> +++ /dev/null
> @@ -1,126 +0,0 @@
> -Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
> -
> -Reference
> -[1] Si5351A/B/C Data Sheet
> - https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
> -
> -The Si5351a/b/c are programmable i2c clock generators with up to 8 output
> -clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
> -3 output clocks are accessible. The internal structure of the clock
> -generators can be found in [1].
> -
> -==I2C device node==
> -
> -Required properties:
> -- compatible: shall be one of the following:
> - "silabs,si5351a" - Si5351a, QFN20 package
> - "silabs,si5351a-msop" - Si5351a, MSOP10 package
> - "silabs,si5351b" - Si5351b, QFN20 package
> - "silabs,si5351c" - Si5351c, QFN20 package
> -- reg: i2c device address, shall be 0x60 or 0x61.
> -- #clock-cells: from common clock binding; shall be set to 1.
> -- clocks: from common clock binding; list of parent clock
> - handles, shall be xtal reference clock or xtal and clkin for
> - si5351c only. Corresponding clock input names are "xtal" and
> - "clkin" respectively.
> -- #address-cells: shall be set to 1.
> -- #size-cells: shall be set to 0.
> -
> -Optional properties:
> -- silabs,pll-source: pair of (number, source) for each pll. Allows
> - to overwrite clock source of pll A (number=0) or B (number=1).
> -
> -==Child nodes==
> -
> -Each of the clock outputs can be overwritten individually by
> -using a child node to the I2C device node. If a child node for a clock
> -output is not set, the eeprom configuration is not overwritten.
> -
> -Required child node properties:
> -- reg: number of clock output.
> -
> -Optional child node properties:
> -- silabs,clock-source: source clock of the output divider stage N, shall be
> - 0 = multisynth N
> - 1 = multisynth 0 for output clocks 0-3, else multisynth4
> - 2 = xtal
> - 3 = clkin (si5351c only)
> -- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
> -- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
> - divider.
> -- silabs,pll-master: boolean, multisynth can change pll frequency.
> -- silabs,pll-reset: boolean, clock output can reset its pll.
> -- silabs,disable-state : clock output disable state, shall be
> - 0 = clock output is driven LOW when disabled
> - 1 = clock output is driven HIGH when disabled
> - 2 = clock output is FLOATING (HIGH-Z) when disabled
> - 3 = clock output is NEVER disabled
> -
> -==Example==
> -
> -/* 25MHz reference crystal */
> -ref25: ref25M {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> -};
> -
> -i2c-master-node {
> -
> - /* Si5351a msop10 i2c clock generator */
> - si5351a: clock-generator@60 {
> - compatible = "silabs,si5351a-msop";
> - reg = <0x60>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #clock-cells = <1>;
> -
> - /* connect xtal input to 25MHz reference */
> - clocks = <&ref25>;
> - clock-names = "xtal";
> -
> - /* connect xtal input as source of pll0 and pll1 */
> - silabs,pll-source = <0 0>, <1 0>;
> -
> - /*
> - * overwrite clkout0 configuration with:
> - * - 8mA output drive strength
> - * - pll0 as clock source of multisynth0
> - * - multisynth0 as clock source of output divider
> - * - multisynth0 can change pll0
> - * - set initial clock frequency of 74.25MHz
> - */
> - clkout0 {
> - reg = <0>;
> - silabs,drive-strength = <8>;
> - silabs,multisynth-source = <0>;
> - silabs,clock-source = <0>;
> - silabs,pll-master;
> - clock-frequency = <74250000>;
> - };
> -
> - /*
> - * overwrite clkout1 configuration with:
> - * - 4mA output drive strength
> - * - pll1 as clock source of multisynth1
> - * - multisynth1 as clock source of output divider
> - * - multisynth1 can change pll1
> - */
> - clkout1 {
> - reg = <1>;
> - silabs,drive-strength = <4>;
> - silabs,multisynth-source = <1>;
> - silabs,clock-source = <0>;
> - pll-master;
> - };
> -
> - /*
> - * overwrite clkout2 configuration with:
> - * - xtal as clock source of output divider
> - */
> - clkout2 {
> - reg = <2>;
> - silabs,clock-source = <2>;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
> new file mode 100644
> index 000000000000..3ca8d998c48c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
> @@ -0,0 +1,251 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Silicon Labs Si5351A/B/C programmable I2C clock generators
> +
> +description: |
> + The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to
> + 8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3
> + output clocks are accessible. The internal structure of the clock generators
> + can be found in [1].
> +
> + [1] Si5351A/B/C Data Sheet
> + https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
> +
> +maintainers:
> + - Alvin Šipraga <alsi@...g-olufsen.dk>
> +
> +properties:
> + compatible:
> + enum:
> + - silabs,si5351a # Si5351A, 20-QFN package
> + - silabs,si5351a-msop # Si5351A, 10-MSOP package
> + - silabs,si5351b # Si5351B, 20-QFN package
> + - silabs,si5351c # Si5351C, 20-QFN package
> +
> + reg:
> + enum:
> + - 0x60
> + - 0x61
> + description: |
> + I2C address of the clock generator
Drop the description.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + "#clock-cells":
> + const: 1
> +
> + silabs,pll-source:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + minItems: 1
> + maxItems: 2
This only defines the number of entries. You need the inner dimensions:
items:
- description: PLL A (0) or PLL B (1)
enum: [ 0, 1 ]
- description: PLL source
enum: [ ??? ]
> + description: |
> + Pair of <number source> for each PLL. Allows to overwrite clock source of
> + PLL A (number=0) or PLL B (number=1).
> +
> +patternProperties:
> + "^clkout@?[0-8]$":
"@" should not be optional. We should fix the node names in the dts
files.
Shouldn't it be 0-7?
> + type: object
> +
> + properties:
> + reg:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Clock output number.
> +
> + clock-frequency:
> + $ref: /schemas/clock/clock.yaml#/properties/clock-frequency
Don't need this ref. Just 'clock-frequency: true' is enough if there are
no constraints? I'm sure there's some min and max freq?
> +
> + silabs,clock-source:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Source clock of the this output's divider stage.
> +
> + 0 - use multisynth N for this output, where N is the output number
> + 1 - use either multisynth 0 (if output number is 0-3) or multisynth 4
> + (otherwise) for this output
> + 2 - use XTAL for this output
> + 3 - use CLKIN for this output (Si5351C only)
> +
> + silabs,drive-strength:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [2, 4, 6, 8]
> + description: Output drive strength in mA.
> +
> + silabs,multisynth-source:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> + description: |
> + Source PLL A (0) or B (1) for the corresponding multisynth divider.
> +
> + silabs,pll-master:
> + type: boolean
> + description: |
> + The frequency of the source PLL is allowed to be changed by the
> + multisynth when setting the rate of this clock output.
> +
> + silabs,pll-reset:
> + type: boolean
> + description: Reset the source PLL when enabling this clock output.
> +
> + silabs,disable-state:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> + description: |
> + Clock output disable state. The state can be one of:
> +
> + 0 - clock output is driven LOW when disabled
> + 1 - clock output is driven HIGH when disabled
> + 2 - clock output is FLOATING (HIGH-Z) when disabled
> + 3 - clock output is never disabled
> +
> + allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: silabs,si5351a-msop
> + then:
> + properties:
> + reg:
> + minimum: 0
> + maximum: 2
> + else:
> + properties:
> + reg:
> + minimum: 0
> + maximum: 7
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: silabs,si5351c
> + then:
> + properties:
> + silabs,clock-source:
> + enum: [0, 1, 2, 3]
> + else:
> + properties:
> + silabs,clock-source:
> + enum: [0, 1, 2]
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +allOf:
> + - $ref: /schemas/clock/clock.yaml
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - silabs,si5351a
> + - silabs,si5351a-msop
> + - silabs,si5351b
> + then:
> + properties:
> + clocks:
> + minItems: 1
> + maxItems: 1
> + clock-names:
> + items:
> + - const: xtal
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: silabs,si5351c
> + then:
> + properties:
> + clocks:
> + minItems: 1
> + maxItems: 2
> + clock-names:
> + minItems: 1
> + items:
> + - const: xtal
> + - const: clkin
> +
> +required:
> + - reg
> + - "#address-cells"
> + - "#size-cells"
> + - "#clock-cells"
> + - clocks
> + - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + si5351a: clock-generator@60 {
Drop unused labels.
> + compatible = "silabs,si5351a-msop";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + /* Connect XTAL input to 25MHz reference */
> + clocks = <&ref25>;
> + clock-names = "xtal";
> +
> + /* Use XTAL input as source of PLL0 and PLL1 */
> + silabs,pll-source = <0 0>, <1 0>;
> +
> + /*
> + * Overwrite CLK0 configuration with:
> + * - 8 mA output drive strength
> + * - PLL0 as clock source of multisynth 0
> + * - Multisynth 0 as clock source of output divider
> + * - Multisynth 0 can change PLL0
> + * - Set initial clock frequency of 74.25MHz
> + */
> + clkout@0 {
> + reg = <0>;
> + silabs,drive-strength = <8>;
> + silabs,multisynth-source = <0>;
> + silabs,clock-source = <0>;
> + silabs,pll-master;
> + clock-frequency = <74250000>;
> + };
> +
> + /*
> + * Overwrite CLK1 configuration with:
> + * - 4 mA output drive strength
> + * - PLL1 as clock source of multisynth 1
> + * - Multisynth 1 as clock source of output divider
> + * - Multisynth 1 can change PLL1
> + * - Reset PLL1 when enabling this clock output
> + */
> + clkout@1 {
> + reg = <1>;
> + silabs,drive-strength = <4>;
> + silabs,multisynth-source = <1>;
> + silabs,clock-source = <0>;
> + silabs,pll-master;
> + silabs,pll-reset;
> + };
> +
> + /*
> + * Overwrite CLK2 configuration with:
> + * - XTAL as clock source of output divider
> + */
> + clkout@2 {
> + reg = <2>;
> + silabs,clock-source = <2>;
> + };
> + };
> + };
> --
> 2.41.0
>
Powered by blists - more mailing lists