linux-kernel - Re: [PATCH 2/3] dt-bindings: clock: si5351: add PLL reset mode property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230921182007.GA761604-robh@kernel.org>
Date:   Thu, 21 Sep 2023 13:20:07 -0500
From:   Rob Herring <robh@...nel.org>
To:     Alvin Šipraga <alvin@...s.dk>
Cc:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        �ipraga <alsi@...g-olufsen.dk>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Rabeeh Khoury <rabeeh@...id-run.com>,
        Jacob Siverskog <jacob@...nage.engineering>,
        Sergej Sawazki <sergej@...dac.com>, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] dt-bindings: clock: si5351: add PLL reset mode
 property

On Wed, Sep 20, 2023 at 03:09:54PM +0200, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@...g-olufsen.dk>
> 
> For applications where the PLL must be adjusted without glitches in the
> clock output(s), a new silabs,pll-reset-mode property is added. It
> can be used to specify whether or not the PLL should be reset after
> adjustment. Resetting is known to cause glitches.
> 
> For compatibility with older device trees, it must be assumed that the
> default PLL reset mode is to unconditionally reset after adjustment.
> 
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> Cc: Rabeeh Khoury <rabeeh@...id-run.com>
> Cc: Jacob Siverskog <jacob@...nage.engineering>
> Cc: Sergej Sawazki <sergej@...dac.com>
> Signed-off-by: Alvin Šipraga <alsi@...g-olufsen.dk>
> ---
>  .../bindings/clock/silabs,si5351.yaml         | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
> index 3ca8d998c48c..b6692b323a66 100644
> --- a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
> +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
> @@ -50,6 +50,22 @@ properties:
>        Pair of <number source> for each PLL. Allows to overwrite clock source of
>        PLL A (number=0) or PLL B (number=1).
>  
> +  silabs,pll-reset-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Pair of <number mode> for each PLL. Configures the reset mode for PLL A
> +      (number=0) and/or PLL B (number=1). Mode can be one of:
> +
> +      0 - reset whenever PLL rate is adjusted (default mode)
> +      1 - do not reset when PLL rate is adjusted
> +
> +      In mode 1, the PLL is only reset if the silabs,pll-reset is specified in
> +      one of the clock output child nodes that also sources the PLL. This mode
> +      may be preferable if output clocks are expected to be adjusted without
> +      glitches.

Same comments as the other matrix property.

> +
>  patternProperties:
>    "^clkout@?[0-8]$":
>      type: object
> @@ -205,6 +221,9 @@ examples:
>          /* Use XTAL input as source of PLL0 and PLL1 */
>          silabs,pll-source = <0 0>, <1 0>;
>  
> +        /* Don't reset PLL1 on rate adjustment */
> +        silabs,pll-reset-mode = <1 1>;
> +
>          /*
>           * Overwrite CLK0 configuration with:
>           * - 8 mA output drive strength
> -- 
> 2.41.0
>