[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c31577ee-9d81-212b-42a6-e72a648f9276@linaro.org>
Date: Sun, 24 Sep 2023 13:49:24 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Vladimir Oltean <vladimir.oltean@....com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org
Cc: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Heiner Kallweit <hkallweit1@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Madalin Bucur <madalin.bucur@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
Camelia Groza <camelia.groza@....com>,
Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor@...nel.org>,
Sean Anderson <sean.anderson@...o.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>
Subject: Re: [RFC PATCH v2 net-next 13/15] dt-bindings: lynx-pcs: add
properties for backplane mode
On 23/09/2023 15:49, Vladimir Oltean wrote:
> When the Lynx PCS is deployed on a copper backplane link, it must be
> prepared to handle clause 73 autoneg and clause 72 link training, which
> it can do using a dedicated AN/LT block. The latter doesn't need to be
> described in the device tree, because it is discoverable from the SerDes
> lanes.
>
> The media type that is deployed on the link is not discoverable though,
> so the introduction of a fsl,backplane-mode boolean property appears
> necessary to determine whether the AN/LT block should be employed, or
> left bypassed.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> ---
> v1->v2: patch is new
>
> .../devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
> index fbedf696c555..40fbcd80ee2a 100644
> --- a/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
> +++ b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
> @@ -16,11 +16,24 @@ description: |
>
> properties:
> compatible:
> - const: fsl,lynx-pcs
> + enum:
> + - fsl,lx2160a-lynx-pcs
> + - fsl,lynx-pcs
>
> reg:
> maxItems: 1
>
> + phys:
> + maxItems: 4
> + description:
> + phandle for the SerDes lanes that act as PMA/PMD layer when the PCS is
> + part of a copper backplane PHY.
> +
> + fsl,backplane-mode:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Indicates that the PCS is deployed over a copper backplane link.
> +
Please extend also existing example. If these do not apply to lynx-pcs,
then they should be disallowed in allOf:if:then.
Best regards,
Krzysztof
Powered by blists - more mailing lists