[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230925150010.1.Iff672233861bcc4cf25a7ad0a81308adc3bda8a4@changeid>
Date: Mon, 25 Sep 2023 15:00:11 -0700
From: Douglas Anderson <dianders@...omium.org>
To: dri-devel@...ts.freedesktop.org
Cc: linux-samsung-soc@...r.kernel.org,
Hsin-Yi Wang <hsinyi@...omium.org>, matthias.bgg@...il.com,
linux-arm-kernel@...ts.infradead.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
devicetree@...r.kernel.org, linux-mediatek@...ts.infradead.org,
Marek Szyprowski <m.szyprowski@...sung.com>,
Douglas Anderson <dianders@...omium.org>, airlied@...il.com,
daniel@...ll.ch, jitao.shi@...iatek.com, linus.walleij@...aro.org,
linux-kernel@...r.kernel.org, neil.armstrong@...aro.org,
quic_jesszhan@...cinc.com, sam@...nborg.org
Subject: [PATCH] drm/panel: Move AUX B116XW03 out of panel-edp back to panel-simple
In commit 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of
panel-simple") I moved a pile of panels out of panel-simple driver
into the newly created panel-edp driver. One of those panels, however,
shouldn't have been moved.
As is clear from commit e35e305eff0f ("drm/panel: simple: Add AUO
B116XW03 panel support"), AUX B116XW03 is an LVDS panel. It's used in
exynos5250-snow and exynos5420-peach-pit where it's clear that the
panel is hooked up with LVDS. Furthermore, searching for datasheets I
found one that makes it clear that this panel is LVDS.
As far as I can tell, I got confused because in commit 88d3457ceb82
("drm/panel: auo,b116xw03: fix flash backlight when power on") Jitao
Shi added "DRM_MODE_CONNECTOR_eDP". That seems wrong. Looking at the
downstream ChromeOS trees, it seems like some Mediatek boards are
using a panel that they call "auo,b116xw03" that's an eDP panel. The
best I can guess is that they actually have a different panel that has
similar timing. If so then the proper panel should be used or they
should switch to the generic "edp-panel" compatible.
When moving this back to panel-edp, I wasn't sure what to use for
.bus_flags and .bus_format and whether to add the extra "enable" delay
from commit 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash
backlight when power on"). I've added formats/flags/delays based on my
(inexpert) analysis of the datasheet. These are untested.
NOTE: if/when this is backported to stable, we might run into some
trouble. Specifically, before 474c162878ba ("arm64: dts: mt8183:
jacuzzi: Move panel under aux-bus") this panel was used by
"mt8183-kukui-jacuzzi", which assumed it was an eDP panel. I don't
know what to suggest for that other than someone making up a bogus
panel for jacuzzi that's just for the stable channel.
Fixes: 88d3457ceb82 ("drm/panel: auo,b116xw03: fix flash backlight when power on")
Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple")
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
I haven't had a snow or peach-pit hooked up for debugging / testing
for years. I presume that they must be broken and hope that this fixes
them.
drivers/gpu/drm/panel/panel-edp.c | 29 -----------------------
drivers/gpu/drm/panel/panel-simple.c | 35 ++++++++++++++++++++++++++++
2 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index feb665df35a1..95c8472d878a 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -976,32 +976,6 @@ static const struct panel_desc auo_b116xak01 = {
},
};
-static const struct drm_display_mode auo_b116xw03_mode = {
- .clock = 70589,
- .hdisplay = 1366,
- .hsync_start = 1366 + 40,
- .hsync_end = 1366 + 40 + 40,
- .htotal = 1366 + 40 + 40 + 32,
- .vdisplay = 768,
- .vsync_start = 768 + 10,
- .vsync_end = 768 + 10 + 12,
- .vtotal = 768 + 10 + 12 + 6,
- .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc auo_b116xw03 = {
- .modes = &auo_b116xw03_mode,
- .num_modes = 1,
- .bpc = 6,
- .size = {
- .width = 256,
- .height = 144,
- },
- .delay = {
- .enable = 400,
- },
-};
-
static const struct drm_display_mode auo_b133han05_mode = {
.clock = 142600,
.hdisplay = 1920,
@@ -1725,9 +1699,6 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b116xa01",
.data = &auo_b116xak01,
- }, {
- .compatible = "auo,b116xw03",
- .data = &auo_b116xw03,
}, {
.compatible = "auo,b133han05",
.data = &auo_b133han05,
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index bb89e6d047bc..439d26928938 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -919,6 +919,38 @@ static const struct panel_desc auo_b101xtn01 = {
},
};
+static const struct drm_display_mode auo_b116xw03_mode = {
+ .clock = 70589,
+ .hdisplay = 1366,
+ .hsync_start = 1366 + 40,
+ .hsync_end = 1366 + 40 + 40,
+ .htotal = 1366 + 40 + 40 + 32,
+ .vdisplay = 768,
+ .vsync_start = 768 + 10,
+ .vsync_end = 768 + 10 + 12,
+ .vtotal = 768 + 10 + 12 + 6,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc auo_b116xw03 = {
+ .modes = &auo_b116xw03_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 256,
+ .height = 144,
+ },
+ .delay = {
+ .prepare = 1,
+ .enable = 200,
+ .disable = 200,
+ .unprepare = 500,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct display_timing auo_g070vvn01_timings = {
.pixelclock = { 33300000, 34209000, 45000000 },
.hactive = { 800, 800, 800 },
@@ -4128,6 +4160,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b101xtn01",
.data = &auo_b101xtn01,
+ }, {
+ .compatible = "auo,b116xw03",
+ .data = &auo_b116xw03,
}, {
.compatible = "auo,g070vvn01",
.data = &auo_g070vvn01,
--
2.42.0.515.g380fc7ccd1-goog
Powered by blists - more mailing lists