Message-ID: <20230925012652.GG7231@dragon>
Date:   Mon, 25 Sep 2023 09:26:52 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Yannic Moog <y.moog@...tec.de>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Li Yang <leoyang.li@....com>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, upstream@...ts.phytec.de
Subject: Re: [PATCH 2/2] arm64: dts: freescale: add phyGATE-Tauri i.MX 8M
 Mini Support

On Fri, Sep 01, 2023 at 11:26:17AM +0200, Yannic Moog wrote:
> phyGATE-Tauri uses a phyCORE-i.MX8MM SoM. Add device tree for the board.
> 
> Signed-off-by: Yannic Moog <y.moog@...tec.de>
> ---
>  arch/arm64/boot/dts/freescale/Makefile             |   1 +
>  .../boot/dts/freescale/imx8mm-phygate-tauri-l.dts  | 488 +++++++++++++++++++++
>  2 files changed, 489 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index a750be13ace8..68e5a878e359 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
> new file mode 100644
> index 000000000000..457b23aa57fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
> @@ -0,0 +1,488 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/leds/common.h>
> +#include "imx8mm-phycore-som.dtsi"
> +
> +/ {
> +	model = "PHYTEC phyGATE-Tauri-L-iMX8MM";
> +	compatible = "phytec,imx8mm-phygate-tauri-l",
> +		     "phytec,imx8mm-phycore-som", "fsl,imx8mm";
> +
> +	chosen {
> +		stdout-path = &uart3;
> +	};
> +
> +	can_osc_40m: can-clock {

Can we name the code clock-can?

> +		compatible = "fixed-clock";
> +		clock-frequency = <40000000>;
> +		clock-output-names = "can_osc_40m";
> +		#clock-cells = <0>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpiokeys>;
> +
> +		key {
> +			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> +			label = "KEY-A";
> +			linux,code = <30>;

Can we use the constant defined in
include/dt-bindings/input/linux-event-codes.h?

> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_leds>;
> +
> +		led-1 {
> +			color = <LED_COLOR_ID_RED>;
> +			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "none";
> +		};
> +
> +		led-2 {
> +			color = <LED_COLOR_ID_YELLOW>;
> +			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "none";
> +		};
> +	};
> +
> +	usdhc1_pwrseq: pwr-seq {
> +		compatible = "mmc-pwrseq-simple";
> +		post-power-on-delay-ms = <100>;
> +		power-off-delay-us = <60>;
> +		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	reg_usb_hub_vbus: regulator-hub-otg1 {
> +		compatible = "regulator-fixed";
> +		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usbhubpwr>;
> +		regulator-name = "usb_hub_vbus";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +	};
> +
> +	reg_usb_otg1_vbus: regulator-usb-otg1 {
> +		compatible = "regulator-fixed";
> +		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usbotg1pwr>;
> +		regulator-name = "usb_otg1_vbus";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;

Can we move it after 'gpio' property?

> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		off-on-delay-us = <20000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-name = "VSD_3V3";
> +	};
> +};
> +
> +&ecspi1 {
> +	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
> +		   <&gpio5 13 GPIO_ACTIVE_LOW>,
> +		   <&gpio5 2 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	/* CAN MCP251XFD */
> +	can0: can@0 {
> +		compatible = "microchip,mcp251xfd";
> +		clocks = <&can_osc_40m>;
> +		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-parent = <&gpio1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_can_int>;
> +		reg = <0>;

We usually put 'reg' right after 'compatible'.

Shawn

> +		spi-max-frequency = <10000000>;
> +	};
> +
> +	tpm: tpm@1 {
> +		compatible = "tcg,tpm_tis-spi";
> +		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-parent = <&gpio2>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tpm>;
> +		reg = <1>;
> +		spi-max-frequency = <38000000>;
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	pinctrl-1 = <&pinctrl_i2c2_gpio>;
> +	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	status = "okay";
> +
> +	temp_sense0: temperature-sensor@49 {
> +		compatible = "ti,tmp102";
> +		reg = <0x49>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tempsense>;
> +		#thermal-sensor-cells = <1>;
> +	};
> +};
> +
> +&i2c3 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	pinctrl-1 = <&pinctrl_i2c3_gpio>;
> +	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	pinctrl-1 = <&pinctrl_i2c4_gpio>;
> +	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	status = "okay";
> +};
> +
> +/* PCIe */
> +&pcie0 {
> +	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> +			  <&clk IMX8MM_CLK_PCIE1_PHY>,
> +			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> +				 <&clk IMX8MM_SYS_PLL2_100M>,
> +				 <&clk IMX8MM_SYS_PLL2_250M>;
> +	assigned-clock-rates = <10000000>, <100000000>, <250000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie>;
> +	reset-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +	status = "okay";
> +};
> +
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +	status = "okay";
> +};
> +
> +&pwm4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm4>;
> +	status = "okay";
> +};
> +
> +/* RTC */
> +&rv3028 {
> +	trickle-resistor-ohms = <3000>;
> +};
> +
> +&uart1 {
> +	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +/* UART2 - RS232 */
> +&uart2 {
> +	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +/* UART - console */
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	status = "okay";
> +};
> +
> +/* USB */
> +&usbotg1 {
> +	adp-disable;
> +	dr_mode = "otg";
> +	over-current-active-low;
> +	samsung,picophy-pre-emp-curr-control = <3>;
> +	samsung,picophy-dc-vol-level-adjust = <7>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg1>;
> +	srp-disable;
> +	vbus-supply = <&reg_usb_otg1_vbus>;
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	disable-over-current;
> +	dr_mode = "host";
> +	samsung,picophy-pre-emp-curr-control = <3>;
> +	samsung,picophy-dc-vol-level-adjust = <7>;
> +	vbus-supply = <&reg_usb_hub_vbus>;
> +	status = "okay";
> +};
> +
> +/* SD-Card */
> +&usdhc2 {
> +	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
> +	assigned-clock-rates = <200000000>;
> +	bus-width = <4>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	vqmmc-supply = <&reg_nvcc_sd2>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_can_int: can-intgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x00
> +		>;
> +	};
> +
> +	pinctrl_ecspi1: ecspi1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
> +			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
> +			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
> +		>;
> +	};
> +
> +	pinctrl_ecspi1_cs: ecspi1csgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x00
> +			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00
> +			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00
> +		>;
> +	};
> +
> +	pinctrl_gpiokeys: keygrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x00
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c2
> +			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c2_gpio: i2c2gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x1e0
> +			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x1e0
> +		>;
> +	};
> +
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL	0x400001c2
> +			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA	0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c3_gpio: i2c3gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x1e0
> +			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x1e0
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL	0x400001c2
> +			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA	0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c4_gpio: i2c4gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x1e0
> +			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x1e0
> +		>;
> +	};
> +
> +	pinctrl_leds: leds1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x00
> +			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00
> +		>;
> +	};
> +
> +	pinctrl_pcie: pciegrp {
> +		fsl,pins = <
> +			/* COEX2 */
> +			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x00
> +			/* COEX1 */
> +			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x12
> +		>;
> +	};
> +
> +	pinctrl_pwm1: pwm1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x40
> +		>;
> +	};
> +
> +	pinctrl_pwm3: pwm3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT		0x40
> +		>;
> +	};
> +
> +	pinctrl_pwm4: pwm4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT	0x40
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x40
> +		>;
> +	};
> +
> +	pinctrl_tempsense: tempsensegrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x00
> +		>;
> +	};
> +
> +	pinctrl_tpm: tpmgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x140
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x00
> +			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x00
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
> +			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
> +			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
> +		>;
> +	};
> +
> +	pinctrl_usbhubpwr: usbhubpwrgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00
> +		>;
> +	};
> +
> +	pinctrl_usbotg1pwr: usbotg1pwrgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00
> +		>;
> +	};
> +
> +	pinctrl_usbotg1: usbotg1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x80
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
> +			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0xc6
> +			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc6
> +			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc6
> +			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc6
> +			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc6
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x40
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x192
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d2
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d2
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d2
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d2
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d2
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
> +		>;
> +	};
> +};
> 
> -- 
> 2.34.1
> 

Powered by blists - more mailing lists