[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFo9i-8maLJ=L5re8pe4v2v5vQ8Jy+g-MqtNZH_w6Lb9cg@mail.gmail.com>
Date: Tue, 26 Sep 2023 17:03:42 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Pablo Sun <pablo.sun@...iatek.com>
Cc: Chaotian Jing <chaotian.jing@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v1] mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
On Fri, 22 Sept 2023 at 11:54, Pablo Sun <pablo.sun@...iatek.com> wrote:
>
> Use atomic readl_poll_timeout_atomic, because msdc_reset_hw
> may be invoked in IRQ handler in the following context:
>
> msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw()
>
> The following kernel BUG stack trace can be observed on
> Genio 1200 EVK after initializing MSDC1 hardware during kernel boot:
>
> [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002
> [ 1.189157] Modules linked in:
> [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1
> [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT)
> [ 1.206484] Call trace:
> [ 1.206796] dump_backtrace+0x0/0x1ac
> [ 1.207266] show_stack+0x24/0x30
> [ 1.207692] dump_stack_lvl+0x68/0x84
> [ 1.208162] dump_stack+0x1c/0x38
> [ 1.208587] __schedule_bug+0x68/0x80
> [ 1.209056] __schedule+0x6ec/0x7c0
> [ 1.209502] schedule+0x7c/0x110
> [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0
> [ 1.210569] schedule_hrtimeout_range+0x20/0x30
> [ 1.211148] usleep_range_state+0x84/0xc0
> [ 1.211661] msdc_reset_hw+0xc8/0x1b0
> [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0
> [ 1.212693] msdc_irq+0x104/0x2d4
> [ 1.213121] __handle_irq_event_percpu+0x68/0x280
> [ 1.213725] handle_irq_event+0x70/0x15c
> [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4
> [ 1.214755] handle_domain_irq+0x6c/0x9c
> [ 1.215260] gic_handle_irq+0xc4/0x180
> [ 1.215741] call_on_irq_stack+0x2c/0x54
> [ 1.216245] do_interrupt_handler+0x5c/0x70
> [ 1.216782] el1_interrupt+0x30/0x80
> [ 1.217242] el1h_64_irq_handler+0x1c/0x2c
> [ 1.217769] el1h_64_irq+0x78/0x7c
> [ 1.218206] cpuidle_enter_state+0xc8/0x600
> [ 1.218744] cpuidle_enter+0x44/0x5c
> [ 1.219205] do_idle+0x224/0x2d0
> [ 1.219624] cpu_startup_entry+0x30/0x80
> [ 1.220129] rest_init+0x108/0x134
> [ 1.220568] arch_call_rest_init+0x1c/0x28
> [ 1.221094] start_kernel+0x6c0/0x700
> [ 1.221564] __primary_switched+0xc0/0xc8
>
> Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling")
> Signed-off-by: Pablo Sun <pablo.sun@...iatek.com>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/mtk-sd.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 5392200cfdf7..97f7c3d4be6e 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host)
> u32 val;
>
> sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
> - readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
> + readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
>
> sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
> - readl_poll_timeout(host->base + MSDC_FIFOCS, val,
> - !(val & MSDC_FIFOCS_CLR), 0, 0);
> + readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val,
> + !(val & MSDC_FIFOCS_CLR), 0, 0);
>
> val = readl(host->base + MSDC_INT);
> writel(val, host->base + MSDC_INT);
> --
> 2.18.0
>
Powered by blists - more mailing lists