| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20798069-6057-4e52-9c79-8d851e0afadd@blueyonder.co.uk>
Date: Wed, 27 Sep 2023 20:14:32 +0100
From: Sid Boyce <sboyce@...eyonder.co.uk>
To: Randy Dunlap <rdunlap@...radead.org>,
Bagas Sanjaya <bagasdotme@...il.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux ALSA <alsa-devel@...a-project.org>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Subject: Re: Ryzen 9 7950x sound module does not not build
On 27/09/2023 16:40, Randy Dunlap wrote:
>
> On 9/27/23 04:27, Sid Boyce wrote:
>> On 26/09/2023 23:13, Randy Dunlap wrote:
> || The snd-rpl-pci-acp6x driver only supports
> || vendor=0x1022, device=0x15e2, and PCI revision=0x62.
>
>>> lspci -vv
>>
>> 01:00.1 Audiodevice: NVIDIA Corporation Device 10fa (rev a1)
>> Subsystem: NVIDIA Corporation Device 1f82
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin B routed to IRQ 80
>> IOMMU group: 11
>> Region 0: Memory at fc080000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: [60] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [78] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W
>> DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
>> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 256 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
>> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s (downgraded), Width x16
>> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
>> 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix-
>> EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>> FRS- TPHComp- ExtTPHComp-
>> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
>> AtomicOpsCtl: ReqEn-
>> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>> EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>> Retimer- 2Retimers- CrosslinkRes: unsupported
>> Capabilities: [100 v2] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
>> AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
>> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>> HeaderLog: 00000000 00000000 00000000 00000000
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
>> 0b:00.6 Audiodevice: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD AudioController
>> DeviceName: Realtek ALC897 Audio
>> Subsystem: ASUSTeK Computer Inc. Device 87fb
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin C routed to IRQ 81
>> IOMMU group: 24
>> Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=32K]
>> Capabilities: [48] Vendor Specific Information: Len=08 <?>
>> Capabilities: [50] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [64] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
>> DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 256 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
>> LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 16GT/s, Width x16
>> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
>> 10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
>> EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>> FRS- TPHComp- ExtTPHComp-
>> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
>> AtomicOpsCtl: ReqEn-
>> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>> EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>> Retimer- 2Retimers- CrosslinkRes: unsupported
>> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>> Address: 00000000fee00000 Data: 0000
>> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>> Capabilities: [2a0 v1] Access Control Services
>> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
> Sid, do you have some reason to believe that one of these devices should use the
> snd-rpl-pci-acp6x driver? I don't see that either one of them is the correct
> vendor/device ID pair for that driver, but I would prefer that someone who is
> familiar with the driver & device jump in here...
>
Switched to pulseaudio, results are absolutely the same as with pipewire.
After reboot without USB dongle only the Digital Stereo (IEC958) showed
in kmix.
Plugged in the USB dongle in order to get sound working.
--
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks
Powered by blists - more mailing lists