linux-kernel - Re: [PATCH V3 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 27 Sep 2023 11:25:05 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Nitin Rawat <quic_nitirawa@...cinc.com>, agross@...nel.org,
        andersson@...nel.org, mani@...nel.org, alim.akhtar@...sung.com,
        bvanassche@....org, avri.altman@....com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        cros-qcom-dts-watchers@...omium.org
Cc:     linux-arm-msm@...r.kernel.org, linux-scsi@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH V3 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280
 IDP board

On 27.09.2023 10:18, Nitin Rawat wrote:
> Add UFS host controller and PHY nodes for sc7280 IDP board.
> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 2ff549f4dc7a..a0059527d9e4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -499,6 +499,25 @@
>  	status = "okay";
>  };
> 
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +	vcc-supply = <&vreg_l7b_2p9>;
> +	vcc-max-microamp = <800000>;
> +	vccq-supply = <&vreg_l9b_1p2>;
> +	vccq-max-microamp = <900000>;
> +	vccq2-supply = <&vreg_l9b_1p2>;
> +	vccq2-max-microamp = <900000>;
Were you able to confirm it's correct (see the q in [1])

Konrad

[1] https://lore.kernel.org/linux-arm-msm/20230926162042.14180-1-quic_nitirawa@quicinc.com/T/#m72ca82a9145af380ffd37415455d6ef3d4195795