[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1401c432-464f-4f6b-a43a-40b8c9c57247@kernel.org>
Date: Mon, 2 Oct 2023 19:35:34 +0300
From: Roger Quadros <rogerq@...nel.org>
To: Vinicius Costa Gomes <vinicius.gomes@...el.com>,
MD Danish Anwar <danishanwar@...com>,
Andrew Lunn <andrew@...n.ch>,
Vignesh Raghavendra <vigneshr@...com>,
Richard Cochran <richardcochran@...il.com>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>, vladimir.oltean@....com,
Simon Horman <horms@...nel.org>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org, srk@...com,
r-gunasekaran@...com, linux-omap@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Roger Quadros <rogerq@...com>
Subject: Re: [PATCH net-next v3] net: ti: icssg_prueth: add TAPRIO offload
support
On 30/09/2023 05:37, Vinicius Costa Gomes wrote:
> MD Danish Anwar <danishanwar@...com> writes:
>
>> From: Roger Quadros <rogerq@...com>
>>
>> ICSSG dual-emac f/w supports Enhanced Scheduled Traffic (EST – defined
>> in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018)
>> configuration. EST allows express queue traffic to be scheduled
>> (placed) on the wire at specific repeatable time intervals. In
>> Linux kernel, EST configuration is done through tc command and
>> the taprio scheduler in the net core implements a software only
>> scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration,
>> user indicate "flag 2" in the command which is then parsed by
>> taprio scheduler in net core and indicate that the command is to
>> be offloaded to h/w. taprio then offloads the command to the
>> driver by calling ndo_setup_tc() ndo ops. This patch implements
>> ndo_setup_tc() to offload EST configuration to ICSSG.
>>
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>> ---
>> Cc: Roger Quadros <rogerq@...com>
>> Cc: Andrew Lunn <andrew@...n.ch>
>> Cc: Vinicius Costa Gomes <vinicius.gomes@...el.com>
>>
>> Changes from v2 to v3:
>> *) Rebased on the latest next-20230828 linux-next.
>> *) Retained original authorship of the patch.
>> *) Addressed Roger's comments and modified emac_setup_taprio() and
>> emac_set_taprio() APIs accordingly.
>> *) Removed netif_running() check from emac_setup_taprio().
>> *) Addressed Vinicius' comments and added check for MIN and MAX cycle time.
>> *) Added check for allocation failure of est_new in emac_setup_taprio().
>>
>> Changes from v1 to v2:
>> *) Rebased on the latest next-20230821 linux-next.
>> *) Dropped the RFC tag as merge window is open now.
>> *) Splitted this patch from the switch mode series [v1].
>> *) Removed TODO comment as asked by Andrew and Roger.
>> *) Changed Copyright to 2023 as asked by Roger.
>>
>> v2: https://lore.kernel.org/all/20230921070031.795788-1-danishanwar@ti.com/
>> v1: https://lore.kernel.org/all/20230830110847.1219515-1-danishanwar@ti.com/
>>
>> drivers/net/ethernet/ti/Makefile | 3 +-
>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 5 +-
>> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 6 +
>> drivers/net/ethernet/ti/icssg/icssg_qos.c | 295 +++++++++++++++++++
>> drivers/net/ethernet/ti/icssg/icssg_qos.h | 124 ++++++++
>> 5 files changed, 431 insertions(+), 2 deletions(-)
>> create mode 100644 drivers/net/ethernet/ti/icssg/icssg_qos.c
>> create mode 100644 drivers/net/ethernet/ti/icssg/icssg_qos.h
>>
>> diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
>> index 34fd7a716ba6..0df60ded1b2d 100644
>> --- a/drivers/net/ethernet/ti/Makefile
>> +++ b/drivers/net/ethernet/ti/Makefile
>> @@ -37,5 +37,6 @@ icssg-prueth-y := k3-cppi-desc-pool.o \
>> icssg/icssg_config.o \
>> icssg/icssg_mii_cfg.o \
>> icssg/icssg_stats.o \
>> - icssg/icssg_ethtool.o
>> + icssg/icssg_ethtool.o \
>> + icssg/icssg_qos.o
>> obj-$(CONFIG_TI_ICSS_IEP) += icssg/icss_iep.o
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> index 6635b28bc672..89c301716926 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> @@ -1166,7 +1166,7 @@ static int emac_phy_connect(struct prueth_emac *emac)
>> return 0;
>> }
>>
>> -static u64 prueth_iep_gettime(void *clockops_data, struct ptp_system_timestamp *sts)
>> +u64 prueth_iep_gettime(void *clockops_data, struct ptp_system_timestamp *sts)
>> {
>> u32 hi_rollover_count, hi_rollover_count_r;
>> struct prueth_emac *emac = clockops_data;
>> @@ -1403,6 +1403,8 @@ static int emac_ndo_open(struct net_device *ndev)
>> napi_enable(&emac->tx_chns[i].napi_tx);
>> napi_enable(&emac->napi_rx);
>>
>> + icssg_qos_tas_init(ndev);
>> +
>> /* start PHY */
>> phy_start(ndev->phydev);
>>
>> @@ -1669,6 +1671,7 @@ static const struct net_device_ops emac_netdev_ops = {
>> .ndo_set_rx_mode = emac_ndo_set_rx_mode,
>> .ndo_eth_ioctl = emac_ndo_ioctl,
>> .ndo_get_stats64 = emac_ndo_get_stats64,
>> + .ndo_setup_tc = icssg_qos_ndo_setup_tc,
>> };
>>
>> /* get emac_port corresponding to eth_node name */
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> index 8b6d6b497010..7cbf0e561905 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> @@ -37,6 +37,7 @@
>> #include "icssg_config.h"
>> #include "icss_iep.h"
>> #include "icssg_switch_map.h"
>> +#include "icssg_qos.h"
>>
>> #define PRUETH_MAX_MTU (2000 - ETH_HLEN - ETH_FCS_LEN)
>> #define PRUETH_MIN_PKT_SIZE (VLAN_ETH_ZLEN)
>> @@ -174,6 +175,8 @@ struct prueth_emac {
>>
>> struct pruss_mem_region dram;
>>
>> + struct prueth_qos qos;
>> +
>> struct delayed_work stats_work;
>> u64 stats[ICSSG_NUM_STATS];
>> };
>> @@ -285,4 +288,7 @@ u32 icssg_queue_level(struct prueth *prueth, int queue);
>> void emac_stats_work_handler(struct work_struct *work);
>> void emac_update_hardware_stats(struct prueth_emac *emac);
>> int emac_get_stat_by_name(struct prueth_emac *emac, char *stat_name);
>> +
>> +u64 prueth_iep_gettime(void *clockops_data, struct ptp_system_timestamp *sts);
>> +
>> #endif /* __NET_TI_ICSSG_PRUETH_H */
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_qos.c b/drivers/net/ethernet/ti/icssg/icssg_qos.c
>> new file mode 100644
>> index 000000000000..95a8b1902879
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_qos.c
>> @@ -0,0 +1,295 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Texas Instruments ICSSG PRUETH QoS submodule
>> + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#include <linux/printk.h>
>> +#include "icssg_prueth.h"
>> +#include "icssg_switch_map.h"
>> +
>> +static void tas_update_fw_list_pointers(struct prueth_emac *emac)
>> +{
>> + struct tas_config *tas = &emac->qos.tas.config;
>> +
>> + if ((readb(tas->active_list)) == TAS_LIST0) {
>> + tas->fw_active_list = emac->dram.va + TAS_GATE_MASK_LIST0;
>> + tas->fw_shadow_list = emac->dram.va + TAS_GATE_MASK_LIST1;
>> + } else {
>> + tas->fw_active_list = emac->dram.va + TAS_GATE_MASK_LIST1;
>> + tas->fw_shadow_list = emac->dram.va + TAS_GATE_MASK_LIST0;
>> + }
>> +}
>> +
>> +static void tas_update_maxsdu_table(struct prueth_emac *emac)
>> +{
>> + struct tas_config *tas = &emac->qos.tas.config;
>> + u16 __iomem *max_sdu_tbl_ptr;
>> + u8 gate_idx;
>> +
>> + /* update the maxsdu table */
>> + max_sdu_tbl_ptr = emac->dram.va + TAS_QUEUE_MAX_SDU_LIST;
>> +
>> + for (gate_idx = 0; gate_idx < TAS_MAX_NUM_QUEUES; gate_idx++)
>> + writew(tas->max_sdu_table.max_sdu[gate_idx], &max_sdu_tbl_ptr[gate_idx]);
>> +}
>> +
>> +static void tas_reset(struct prueth_emac *emac)
>> +{
>> + struct tas_config *tas = &emac->qos.tas.config;
>> + int i;
>> +
>> + for (i = 0; i < TAS_MAX_NUM_QUEUES; i++)
>> + tas->max_sdu_table.max_sdu[i] = 2048;
>> +
>> + tas_update_maxsdu_table(emac);
>> +
>> + writeb(TAS_LIST0, tas->active_list);
>> +
>> + memset_io(tas->fw_active_list, 0, sizeof(*tas->fw_active_list));
>> + memset_io(tas->fw_shadow_list, 0, sizeof(*tas->fw_shadow_list));
>> +}
>> +
>> +static int tas_set_state(struct prueth_emac *emac, enum tas_state state)
>> +{
>> + struct tas_config *tas = &emac->qos.tas.config;
>> + int ret;
>> +
>> + if (tas->state == state)
>> + return 0;
>> +
>> + switch (state) {
>> + case TAS_STATE_RESET:
>> + tas_reset(emac);
>> + ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_RESET);
>> + tas->state = TAS_STATE_RESET;
>> + break;
>> + case TAS_STATE_ENABLE:
>> + ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_ENABLE);
>> + tas->state = TAS_STATE_ENABLE;
>> + break;
>> + case TAS_STATE_DISABLE:
>> + ret = emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_DISABLE);
>> + tas->state = TAS_STATE_DISABLE;
>> + break;
>> + default:
>> + netdev_err(emac->ndev, "%s: unsupported state\n", __func__);
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + if (ret)
>> + netdev_err(emac->ndev, "TAS set state failed %d\n", ret);
>> + return ret;
>> +}
>> +
>> +static int tas_set_trigger_list_change(struct prueth_emac *emac)
>> +{
>> + struct tc_taprio_qopt_offload *admin_list = emac->qos.tas.taprio_admin;
>> + struct tas_config *tas = &emac->qos.tas.config;
>> + struct ptp_system_timestamp sts;
>> + u32 change_cycle_count;
>> + u32 cycle_time;
>> + u64 base_time;
>> + u64 cur_time;
>> +
>> + if (admin_list->cycle_time < TAS_MIN_CYCLE_TIME)
>> + return -EINVAL;
>> +
>> + cycle_time = admin_list->cycle_time - 4; /* -4ns to compensate for IEP wraparound time */
>> + base_time = admin_list->base_time;
>> + cur_time = prueth_iep_gettime(emac, &sts);
>> +
>> + if (base_time > cur_time)
>> + change_cycle_count = DIV_ROUND_UP_ULL(base_time - cur_time, cycle_time);
>> + else
>> + change_cycle_count = 1;
>> +
>> + writel(cycle_time, emac->dram.va + TAS_ADMIN_CYCLE_TIME);
>> + writel(change_cycle_count, emac->dram.va + TAS_CONFIG_CHANGE_CYCLE_COUNT);
>> + writeb(admin_list->num_entries, emac->dram.va + TAS_ADMIN_LIST_LENGTH);
>> +
>> + /* config_change cleared by f/w to ack reception of new shadow list */
>> + writeb(1, &tas->config_list->config_change);
>> + /* config_pending cleared by f/w when new shadow list is copied to active list */
>> + writeb(1, &tas->config_list->config_pending);
>> +
>> + return emac_set_port_state(emac, ICSSG_EMAC_PORT_TAS_TRIGGER);
>> +}
>> +
>> +static int tas_update_oper_list(struct prueth_emac *emac)
>> +{
>> + struct tc_taprio_qopt_offload *admin_list = emac->qos.tas.taprio_admin;
>> + struct tas_config *tas = &emac->qos.tas.config;
>> + u32 tas_acc_gate_close_time = 0;
>> + u8 idx, gate_idx, val;
>> + int ret;
>> +
>> + if (admin_list->cycle_time > TAS_MAX_CYCLE_TIME)
>> + return -EINVAL;
>> +
>> + tas_update_fw_list_pointers(emac);
>> +
>> + for (idx = 0; idx < admin_list->num_entries; idx++) {
>> + writeb(admin_list->entries[idx].gate_mask,
>> + &tas->fw_shadow_list->gate_mask_list[idx]);
>> + tas_acc_gate_close_time += admin_list->entries[idx].interval;
>> +
>> + /* extend last entry till end of cycle time */
>> + if (idx == admin_list->num_entries - 1)
>> + writel(admin_list->cycle_time,
>> + &tas->fw_shadow_list->win_end_time_list[idx]);
>> + else
>> + writel(tas_acc_gate_close_time,
>> + &tas->fw_shadow_list->win_end_time_list[idx]);
>> + }
>> +
>> + /* clear remaining entries */
>> + for (idx = admin_list->num_entries; idx < TAS_MAX_CMD_LISTS; idx++) {
>> + writeb(0, &tas->fw_shadow_list->gate_mask_list[idx]);
>> + writel(0, &tas->fw_shadow_list->win_end_time_list[idx]);
>> + }
>> +
>> + /* update the Array of gate close time for each queue in each window */
>> + for (idx = 0 ; idx < admin_list->num_entries; idx++) {
>> + /* On Linux, only PRUETH_MAX_TX_QUEUES are supported per port */
>> + for (gate_idx = 0; gate_idx < PRUETH_MAX_TX_QUEUES; gate_idx++) {
>> + u8 gate_mask_list_idx = readb(&tas->fw_shadow_list->gate_mask_list[idx]);
>> + u32 gate_close_time = 0;
>> +
>> + if (gate_mask_list_idx & BIT(gate_idx))
>> + gate_close_time = readl(&tas->fw_shadow_list->win_end_time_list[idx]);
>> +
>> + writel(gate_close_time,
>> + &tas->fw_shadow_list->gate_close_time_list[idx][gate_idx]);
>> + }
>> + }
>> +
>> + /* tell f/w to swap active & shadow list */
>> + ret = tas_set_trigger_list_change(emac);
>> + if (ret) {
>> + netdev_err(emac->ndev, "failed to swap f/w config list: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + /* Wait for completion */
>> + ret = readb_poll_timeout(&tas->config_list->config_change, val, !val,
>> + USEC_PER_MSEC, 10 * USEC_PER_MSEC);
>> + if (ret) {
>> + netdev_err(emac->ndev, "TAS list change completion time out\n");
>> + return ret;
>> + }
>> +
>> + tas_update_fw_list_pointers(emac);
>> +
>> + return 0;
>> +}
>> +
>> +static int emac_set_taprio(struct prueth_emac *emac)
>> +{
>> + struct tc_taprio_qopt_offload *taprio = emac->qos.tas.taprio_admin;
>> + int ret;
>> +
>> + switch (taprio->cmd) {
>> + case TAPRIO_CMD_DESTROY:
>> + ret = tas_set_state(emac, TAS_STATE_DISABLE);
>> + break;
>> + case TAPRIO_CMD_REPLACE:
>> + ret = tas_update_oper_list(emac);
>> + if (ret)
>> + return ret;
>> + ret = tas_set_state(emac, TAS_STATE_ENABLE);
>
> Double space here.
>
>> + break;
>> + default:
>> + ret = -EOPNOTSUPP;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void emac_cp_taprio(struct tc_taprio_qopt_offload *from,
>> + struct tc_taprio_qopt_offload *to)
>> +{
>> + int i;
>> +
>> + *to = *from;
>> + for (i = 0; i < from->num_entries; i++)
>> + to->entries[i] = from->entries[i];
>> +}
>> +
>> +static int emac_setup_taprio(struct net_device *ndev, void *type_data)
>> +{
>> + struct tc_taprio_qopt_offload *taprio = type_data;
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + struct tc_taprio_qopt_offload *est_new;
>> + int ret, idx;
>> +
>> + if (taprio->cycle_time_extension) {
>> + netdev_err(ndev, "Failed to set cycle time extension");
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + if (taprio->num_entries == 0 ||
>> + taprio->num_entries > TAS_MAX_CMD_LISTS) {
>> + NL_SET_ERR_MSG_FMT_MOD(taprio->extack, "unsupported num_entries %ld in taprio config\n",
>> + taprio->num_entries);
>> + return -EINVAL;
>> + }
>> +
>> + /* If any time_interval is 0 in between the list, then exit */
>> + for (idx = 0; idx < taprio->num_entries; idx++) {
>> + if (taprio->entries[idx].interval == 0) {
>> + NL_SET_ERR_MSG_MOD(taprio->extack, "0 interval in taprio config not supported\n");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + if (emac->qos.tas.taprio_admin)
>> + devm_kfree(&ndev->dev, emac->qos.tas.taprio_admin);
>> +
>> + est_new = devm_kzalloc(&ndev->dev,
>> + struct_size(est_new, entries, taprio->num_entries),
>> + GFP_KERNEL);
>> + if (!est_new)
>> + return -ENOMEM;
>> +
>> + emac_cp_taprio(taprio, est_new);
>> + emac->qos.tas.taprio_admin = est_new;
>> + ret = emac_set_taprio(emac);
>
> This looks weird. I am thinking about the case that taprio->cmd is
> '_DESTROY', the validation that you do will fail, and it will return
> -EINVAL, right? Am I missing something?
>
> I was expecting to see something similar to what is done in
> emac_set_taprio() here before the validation.
This is exactly what I had suggested in patch 1 review.
Use a switch case for tapio->cmd here and do a validation only if
cmd is CMD_REPLACE.
You can look at other drivers implementing TAPRIO for reference.
>
>> + if (ret)
>> + devm_kfree(&ndev->dev, est_new);
>
> Also, in case of error, 'tas.taprio_admin' has an already freed pointer,
> and it's possible that you will try to free it again.
>
>> +
>> + return ret;
>> +}
>> +
>> +int icssg_qos_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
>> + void *type_data)
>> +{
>> + switch (type) {
>> + case TC_SETUP_QDISC_TAPRIO:
>> + return emac_setup_taprio(ndev, type_data);
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +}
>> +
>> +void icssg_qos_tas_init(struct net_device *ndev)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + bool need_setup = false;
>> + struct tas_config *tas;
>> +
>> + tas = &emac->qos.tas.config;
>> +
>> + if (tas->state == TAS_STATE_ENABLE)
>> + need_setup = true;
>> +
>> + tas->config_list = emac->dram.va + TAS_CONFIG_CHANGE_TIME;
>> + tas->active_list = emac->dram.va + TAS_ACTIVE_LIST_INDEX;
>> +
>> + tas_update_fw_list_pointers(emac);
>> +
>> + tas_set_state(emac, TAS_STATE_RESET);
>> +
>> + if (need_setup)
>> + emac_set_taprio(emac);
>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_qos.h b/drivers/net/ethernet/ti/icssg/icssg_qos.h
>> new file mode 100644
>> index 000000000000..c3d455adc0f8
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_qos.h
>> @@ -0,0 +1,124 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#ifndef __NET_TI_ICSSG_QOS_H
>> +#define __NET_TI_ICSSG_QOS_H
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/netdevice.h>
>> +#include <net/pkt_sched.h>
>> +
>> +/**
>> + * Maximum number of gate command entries in each list.
>> + */
>> +#define TAS_MAX_CMD_LISTS (16)
>> +
>> +/**
>> + * Maximum number of transmit queues supported by implementation
>> + */
>> +#define TAS_MAX_NUM_QUEUES (8)
>> +
>> +/**
>> + * Minimum cycle time supported by implementation (in ns)
>> + */
>> +#define TAS_MIN_CYCLE_TIME (1000000)
>> +
>> +/**
>> + * Minimum cycle time supported by implementation (in ns)
>> + */
>> +#define TAS_MAX_CYCLE_TIME (4000000000)
>> +
>> +/**
>> + * Minimum TAS window duration supported by implementation (in ns)
>> + */
>> +#define TAS_MIN_WINDOW_DURATION (10000)
>> +
>> +/**
>> + * List number 0 or 1. Also the value at memory location TAS_ACTIVE_LIST_INDEX
>> + */
>> +enum tas_list_num {
>> + TAS_LIST0 = 0,
>> + TAS_LIST1 = 1
>> +};
>> +
>> +/**
>> + * state of TAS in f/w
>> + */
>> +enum tas_state {
>> + /* PRU's are idle */
>> + TAS_STATE_DISABLE = 0,
>> + /* Enable TAS */
>> + TAS_STATE_ENABLE = 1,
>> + /* Firmware will reset the state machine */
>> + TAS_STATE_RESET = 2,
>> +};
>> +
>> +/**
>> + * Config state machine variables. See IEEE Std 802.1Q-2018 8.6.8.4
>> + */
>> +struct tas_config_list {
>> + /* New list is copied at this time */
>> + u64 config_change_time;
>> + /* config change error counter, incremented if
>> + * admin->BaseTime < current time and TAS_enabled is true
>> + */
>> + u32 config_change_error_counter;
>> + /* True if list update is pending */
>> + u8 config_pending;
>> + /* Set to true when application trigger updating of admin list
>> + * to active list, cleared when configChangeTime is updated
>> + */
>> + u8 config_change;
>> +};
>> +
>> +/**
>> + * Max SDU table. See IEEE Std 802.1Q-2018 12.29.1.1
>> + */
>> +struct tas_max_sdu_table {
>> + u16 max_sdu[TAS_MAX_NUM_QUEUES];
>> +};
>> +
>> +/**
>> + * TAS List Structure based on firmware memory map
>> + */
>> +struct tas_firmware_list {
>> + /* window gate mask list */
>> + u8 gate_mask_list[TAS_MAX_CMD_LISTS];
>> + /* window end time list */
>> + u32 win_end_time_list[TAS_MAX_CMD_LISTS];
>> + /* Array of gate close time for each queue in each window */
>> + u32 gate_close_time_list[TAS_MAX_CMD_LISTS][TAS_MAX_NUM_QUEUES];
>> +};
>> +
>> +/**
>> + * Main Time Aware Shaper Handle
>> + */
>> +struct tas_config {
>> + enum tas_state state;
>> + struct tas_max_sdu_table max_sdu_table;
>> + /* Config change variables */
>> + struct tas_config_list __iomem *config_list;
>> + /* Whether list 1 or list 2 is the operating list */
>> + u8 __iomem *active_list;
>> + /* active List pointer, used by firmware */
>> + struct tas_firmware_list __iomem *fw_active_list;
>> + /* shadow List pointer, used by driver */
>> + struct tas_firmware_list __iomem *fw_shadow_list;
>> +};
>> +
>> +struct prueth_qos_tas {
>> + struct tc_taprio_qopt_offload *taprio_admin;
>> + struct tc_taprio_qopt_offload *taprio_oper;
>> + struct tas_config config;
>> +};
>> +
>> +struct prueth_qos {
>> + /* IET data structure goes here */
>> + struct prueth_qos_tas tas;
>> +};
>> +
>> +void icssg_qos_tas_init(struct net_device *ndev);
>> +int icssg_qos_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
>> + void *type_data);
>> +#endif /* __NET_TI_ICSSG_QOS_H */
>> --
>> 2.34.1
>>
>
--
cheers,
-roger
Powered by blists - more mailing lists