[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231005164051.984254-2-thippeswamy.havalige@amd.com>
Date: Thu, 5 Oct 2023 22:10:48 +0530
From: Thippeswamy Havalige <thippeswamy.havalige@....com>
To: <linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <lpieralisi@...nel.org>, <kw@...ux.com>, <robh@...nel.org>,
<bhelgaas@...gle.com>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <michal.simek@....com>,
<bharat.kumar.gogada@....com>,
Thippeswamy Havalige <thippeswamy.havalige@....com>
Subject: [PATCH v5 RESEND 1/4] PCI: xilinx-nwl: Remove unnecessary code which updates primary, secondary and sub-ordinate bus numbers
The primary,secondary and sub-ordinate bus number registers are updated by
Linux PCI core, so remove code which updates respective fields of type 1
header.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@....com>
---
changes in v5:
- None
changes in v4:
- None
changes in v3:
- Remove unnecessary period at end of subject line.
- Updated commit message.
changes in v2:
- Code increasing ECAM Size value is added into a seperate patch.
- Modified commit messages.
changes in v1:
- Modified commit messages.
---
drivers/pci/controller/pcie-xilinx-nwl.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 176686bdb15c..d8a3a08be1d5 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -166,7 +166,6 @@ struct nwl_pcie {
int irq_intx;
int irq_misc;
u32 ecam_value;
- u8 last_busno;
struct nwl_msi msi;
struct irq_domain *legacy_irq_domain;
struct clk *clk;
@@ -625,7 +624,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
{
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
- u32 breg_val, ecam_val, first_busno = 0;
+ u32 breg_val, ecam_val;
int err;
breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
@@ -683,15 +682,6 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_ecam_base),
E_ECAM_BASE_HI);
- /* Get bus range */
- ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
- pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
- /* Write primary, secondary and subordinate bus numbers */
- ecam_val = first_busno;
- ecam_val |= (first_busno + 1) << 8;
- ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
- writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
-
if (nwl_pcie_link_up(pcie))
dev_info(dev, "Link is UP\n");
else
--
2.25.1
Powered by blists - more mailing lists