[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b506a5ab1e02e11e969321eb1f4ca85ec658b354.camel@mediatek.com>
Date: Fri, 6 Oct 2023 08:40:25 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: Shawn Sung (宋孝謙)
<Shawn.Sung@...iatek.com>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
Singo Chang (張興國)
<Singo.Chang@...iatek.com>,
"chunkuang.hu@...nel.org" <chunkuang.hu@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Jason-JH Lin (林睿祥)
<Jason-JH.Lin@...iatek.com>,
"mchehab@...nel.org" <mchehab@...nel.org>,
Nancy Lin (林欣螢) <Nancy.Lin@...iatek.com>,
"daniel@...ll.ch" <daniel@...ll.ch>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"airlied@...il.com" <airlied@...il.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v7 17/23] drm/mediatek: Support MT8188 Padding in display
driver
Hi, Hsiao-chien:
On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> Padding is a new display module on MT8188, it provides ability
> to add pixels to width and height of a layer with specified colors.
>
> Due to hardware design, Mixer in VDOSYS1 requires width of a layer
> to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
> we need Padding to deal with odd width.
>
> Signed-off-by: Hsiao Chien Sung <shawn.sung@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/Makefile | 3 +-
> drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 +
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 2 +-
> drivers/gpu/drm/mediatek/mtk_padding.c | 206
> ++++++++++++++++++++++++
> 5 files changed, 213 insertions(+), 2 deletions(-)
> create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c
>
> diff --git a/drivers/gpu/drm/mediatek/Makefile
> b/drivers/gpu/drm/mediatek/Makefile
> index d4d193f60271..5e4436403b8d 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -16,7 +16,8 @@ mediatek-drm-y := mtk_disp_aal.o \
> mtk_dsi.o \
> mtk_dpi.o \
> mtk_ethdr.o \
> - mtk_mdp_rdma.o
> + mtk_mdp_rdma.o \
> + mtk_padding.o
>
> obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 2254038519e1..f9fdb1268aa5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -157,4 +157,7 @@ void mtk_mdp_rdma_config(struct device *dev,
> struct mtk_mdp_rdma_cfg *cfg,
> const u32 *mtk_mdp_rdma_get_formats(struct device *dev);
> size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
>
> +int mtk_padding_clk_enable(struct device *dev);
> +void mtk_padding_clk_disable(struct device *dev);
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
> #endif
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 93552d76b6e7..cde69f39a066 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -973,6 +973,7 @@ static struct platform_driver * const
> mtk_drm_drivers[] = {
> &mtk_dsi_driver,
> &mtk_ethdr_driver,
> &mtk_mdp_rdma_driver,
> + &mtk_padding_driver,
> };
>
> static int __init mtk_drm_init(void)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index eb2fd45941f0..562f2db47add 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -64,5 +64,5 @@ extern struct platform_driver mtk_dpi_driver;
> extern struct platform_driver mtk_dsi_driver;
> extern struct platform_driver mtk_ethdr_driver;
> extern struct platform_driver mtk_mdp_rdma_driver;
> -
> +extern struct platform_driver mtk_padding_driver;
> #endif /* MTK_DRM_DRV_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_padding.c
> b/drivers/gpu/drm/mediatek/mtk_padding.c
> new file mode 100644
> index 000000000000..2a29a5fa0a68
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_padding.c
> @@ -0,0 +1,206 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 MediaTek Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
> +#include "mtk_disp_drv.h"
> +#include "mtk_drm_crtc.h"
> +#include "mtk_drm_ddp_comp.h"
> +
> +#define PADDING_CONTROL_REG 0x00
> +#define PADDING_BYPASS BIT(0)
> +#define PADDING_ENABLE BIT(1)
> +#define PADDING_PIC_SIZE_REG 0x04
> +#define PADDING_H_REG 0x08 /* horizontal */
> +#define PADDING_V_REG 0x0c /* vertical */
> +#define PADDING_COLOR_REG 0x10
> +
> +#define PADDING_PIC_SIZE(w, h) ( \
> + ((w) & GENMASK(15, 0)) | \
> + (((h) & GENMASK(15, 0)) >> 16) \
> +)
> +
> +#define PADDING_H(right) (((right) & GENMASK(12, 0)) >> 16)
> +
> +#define PADDING_V(bottom) (((bottom) & GENMASK(12, 0)) >> 16)
> +
> +/* 10-bit RGB without alpha */
> +#define PADDING_COLOR(r, g, b) ( \
> + ((r) & GENMASK(9, 0)) << 22 | \
> + ((g) & GENMASK(9, 0)) << 12 | \
> + ((b) & GENMASK(9, 0)) << 2 \
> +)
> +
> +/**
> + * struct mtk_padding - basic information of Padding
> + * @clk: Clock of the module
> + * @reg: Virtual address of the Padding for CPU to access
> + * @cmdq_reg: CMDQ setting of the Padding
> + *
> + * Every Padding should have different clock source, register base,
> and
> + * CMDQ settings, we stored these differences all together.
> + */
> +struct mtk_padding {
> + struct clk *clk;
> + void __iomem *reg;
> + struct cmdq_client_reg cmdq_reg;
> +};
> +
> +int mtk_padding_clk_enable(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + return clk_prepare_enable(padding->clk);
> +}
> +
> +void mtk_padding_clk_disable(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(padding->clk);
> +}
> +
> +void mtk_padding_start(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + writel(PADDING_ENABLE | PADDING_BYPASS,
> + padding->reg + PADDING_CONTROL_REG);
> +
> + /*
> + * notice that even the padding is in bypass mode,
> + * all the settings must be cleared to 0 or
> + * undefined behaviors could happen
> + */
> + writel(0, padding->reg + PADDING_PIC_SIZE_REG);
> + writel(0, padding->reg + PADDING_H_REG);
> + writel(0, padding->reg + PADDING_V_REG);
> + writel(0, padding->reg + PADDING_COLOR_REG);
> +}
> +
> +void mtk_padding_stop(struct device *dev)
> +{
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + writel_relaxed(0, padding->reg + PADDING_CONTROL_REG);
> +}
> +
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt,
> + u32 width, u32 height, u32 right, u32 bottom,
> u32 color)
mtk_padding_config() is useless, so drop it.
Regards,
CK
> +{
> + bool bypass = true;
> + struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> + if (width | height | right | bottom | color)
> + bypass = false;
> +
> + mtk_ddp_write_mask(cmdq_pkt, bypass,
> + &padding->cmdq_reg, padding->reg,
> + PADDING_CONTROL_REG, PADDING_BYPASS);
> +
> + mtk_ddp_write_mask(cmdq_pkt, PADDING_PIC_SIZE(width, height),
> + &padding->cmdq_reg, padding->reg,
> + PADDING_PIC_SIZE_REG, GENMASK(31, 0));
> +
> + mtk_ddp_write_mask(cmdq_pkt, PADDING_H(right),
> + &padding->cmdq_reg, padding->reg,
> + PADDING_H_REG, GENMASK(31, 0));
> +
> + mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
> + &padding->cmdq_reg, padding->reg,
> + PADDING_V_REG, GENMASK(31, 0));
> +
> + mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
> + &padding->cmdq_reg, padding->reg,
> + PADDING_V_REG, GENMASK(31, 0));
> +}
> +
> +static int mtk_padding_bind(struct device *dev, struct device
> *master, void *data)
> +{
> + return 0;
> +}
> +
> +static void mtk_padding_unbind(struct device *dev, struct device
> *master, void *data)
> +{
> +}
> +
> +static const struct component_ops mtk_padding_component_ops = {
> + .bind = mtk_padding_bind,
> + .unbind = mtk_padding_unbind,
> +};
> +
> +static int mtk_padding_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_padding *priv;
> + struct resource *res;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev, "failed to get clk\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + priv->reg = devm_platform_get_and_ioremap_resource(pdev, 0,
> &res);
> + if (IS_ERR(priv->reg)) {
> + dev_err(dev, "failed to do ioremap\n");
> + return PTR_ERR(priv->reg);
> + }
> +
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> + ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
> + if (ret) {
> + dev_err(dev, "failed to get gce client reg\n");
> + return ret;
> + }
> +#endif
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
> +
> + ret = component_add(dev, &mtk_padding_component_ops);
> + if (ret) {
> + pm_runtime_disable(dev);
> + return dev_err_probe(dev, ret, "failed to add
> component\n");
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_padding_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &mtk_padding_component_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_padding_driver_dt_match[] = {
> + { .compatible = "mediatek,mt8188-padding" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_padding_driver_dt_match);
> +
> +struct platform_driver mtk_padding_driver = {
> + .probe = mtk_padding_probe,
> + .remove = mtk_padding_remove,
> + .driver = {
> + .name = "mediatek-padding",
> + .owner = THIS_MODULE,
> + .of_match_table = mtk_padding_driver_dt_match,
> + },
> +};
Powered by blists - more mailing lists