| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 9 Oct 2023 14:48:27 +0530
From: Rohit Agarwal <quic_rohiagar@...cinc.com>
To: Greg KH <greg@...ah.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: Stephen Rothwell <sfr@...b.auug.org.au>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Next Mailing List <linux-next@...r.kernel.org>
Subject: Re: linux-next: build failure after merge of the usb tree
On 10/4/2023 6:16 PM, Greg KH wrote:
> On Wed, Oct 04, 2023 at 12:17:27PM +0530, Rohit Agarwal wrote:
>> On 10/4/2023 12:13 PM, Greg KH wrote:
>>> On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
>>>> Hi all,
>>>>
>>>> After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
>>>> failed like this:
>>>>
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
>>>> 156 | [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
>>>> | ^~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V2_PCS_SW_RESET
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
>>>> 157 | [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V3_PCS_START_CONTROL
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
>>>> 158 | [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V5_PCS_PCS_STATUS1
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
>>>> 159 | [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V3_PCS_POWER_DOWN_CONTROL
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
>>>> 162 | [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
>>>> 163 | [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> | QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
>>>> 991 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
>>>> 992 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
>>>> 993 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
>>>> 994 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
>>>> 997 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
>>>> 998 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
>>>> 999 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
>>>> 1000 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
>>>> 1001 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
>>>> 1003 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
>>>> 1004 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
>>>> 1008 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
>>>> 1009 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
>>>> 1010 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
>>>> 1011 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
>>>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>>>> 78 | .offset = o, \
>>>> | ^
>>>>
>>>> Caused by commit
>>>>
>>>> 685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
>>>>
>>>> I have used the usb tree from next-20231003 for today.
>>> Thanks, I've now reverted this from my tree.
>> As mentioned in the cover letter of these changes, the series was dependent
>> on the other submitted series [1], [2].
> Ah, I missed that, I almost never read cover letters :)
>
>> Can you also pick these series [1], [2] to resolve this build failures.
>> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> How about you just send this change with these others, or all of them as
> one big series so they can be applied in the proper order?
Adding Dmitry as well.
I see some of the dependent patches are already applied and the patches
from [2] are not.
Since all the rest dependent changes are already applied,
you can pick series[2] and then this series that should also be fine.
Please let me know if this is fine?
Thanks,
Rohit.
> thanks,
>
> greg k-h
Powered by blists - more mailing lists