lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231017165609.GT3553829@hu-bjorande-lv.qualcomm.com>
Date:   Tue, 17 Oct 2023 09:56:09 -0700
From:   Bjorn Andersson <quic_bjorande@...cinc.com>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
CC:     Jingoo Han <jingoohan1@...il.com>,
        Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
        Manivannan Sadhasivam <mani@...nel.org>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof WilczyƄski <kw@...ux.com>,
        Rob Herring <robh@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        <linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH 2/2] PCI: qcom-ep: Implement dbi_cs2_access() function
 callback for DBI CS2 access

On Tue, Oct 17, 2023 at 09:51:29PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Oct 17, 2023 at 07:24:31AM -0700, Bjorn Andersson wrote:
> > On Tue, Oct 17, 2023 at 11:47:55AM +0530, Manivannan Sadhasivam wrote:
> > > From: Manivannan Sadhasivam <mani@...nel.org>
> > 
> > Your S-o-b should match this.
> > 
> 
> I gave b4 a shot for sending the patches and missed this. Will fix it in next
> version.
> 
> > > 
> > > Qcom EP platforms require enabling/disabling the DBI CS2 access while
> > > programming some read only and shadow registers through DBI. So let's
> > > implement the dbi_cs2_access() callback that will be called by the DWC core
> > > while programming such registers like BAR mask register.
> > > 
> > > Without DBI CS2 access, writes to those registers will not be reflected.
> > > 
> > > Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > > ---
> > >  drivers/pci/controller/dwc/pcie-qcom-ep.c | 14 ++++++++++++++
> > >  1 file changed, 14 insertions(+)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > index 32c8d9e37876..4653cbf7f9ed 100644
> > > --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> > > @@ -124,6 +124,7 @@
> > >  
> > >  /* ELBI registers */
> > >  #define ELBI_SYS_STTS				0x08
> > > +#define ELBI_CS2_ENABLE				0xa4
> > >  
> > >  /* DBI registers */
> > >  #define DBI_CON_STATUS				0x44
> > > @@ -262,6 +263,18 @@ static void qcom_pcie_dw_stop_link(struct dw_pcie *pci)
> > >  	disable_irq(pcie_ep->perst_irq);
> > >  }
> > >  
> > > +static void qcom_pcie_dbi_cs2_access(struct dw_pcie *pci, bool enable)
> > > +{
> > > +	struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
> > > +
> > > +	writel_relaxed(enable, pcie_ep->elbi + ELBI_CS2_ENABLE);
> > 
> > Don't you want to maintain the ordering of whatever write came before
> > this?
> > 
> 
> Since this in a dedicated function, I did not care about the ordering w.r.t
> previous writes. Even if it gets inlined, the order should not matter since it
> only enables/disables the CS2 access for the forthcoming writes.
> 

The wmb() - in a non-relaxed writel -  would ensure that no earlier
writes are reordered and end up in your expected set of "forthcoming
writes".

Not sure that the code is wrong, I just want you to be certain that this
isn't a problem.

Thanks,
Bjorn

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ