lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231018091739.10125-6-crescentcy.hsieh@moxa.com>
Date:   Wed, 18 Oct 2023 17:17:38 +0800
From:   Crescent CY Hsieh <crescentcy.hsieh@...a.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>
Cc:     linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
        Crescent CY Hsieh <crescentcy.hsieh@...a.com>
Subject: [PATCH v3 5/6] tty: serial: 8250: Fix MOXA RS422/RS485 PCIe boards not work by default

MOXA PCIe RS422/RS485 boards will not function by default because of the
initial default serial interface of all MOXA PCIe boards is set to RS232.

This patch fixes the problem above by setting the initial default serial
interface to RS422 for those MOXA RS422/RS485 PCIe boards.

Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@...a.com>
---
 drivers/tty/serial/8250/8250_pci.c | 52 ++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b2be3783f..29a28e72b 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1968,6 +1968,12 @@ pci_sunix_setup(struct serial_private *priv,
 
 #define MOXA_GPIO_PIN2	BIT(2)
 
+#define MOXA_RS232	0x00
+#define MOXA_RS422	0x01
+#define MOXA_RS485_4W	0x0B
+#define MOXA_RS485_2W	0x0F
+#define MOXA_UIR_OFFSET	0x04
+
 static bool pci_moxa_is_mini_pcie(unsigned short device)
 {
 	if (device == PCI_DEVICE_ID_MOXA_CP102N	||
@@ -1981,13 +1987,59 @@ static bool pci_moxa_is_mini_pcie(unsigned short device)
 	return false;
 }
 
+/*
+ * The second digit of the MOXA PCIe device ID in hexadecimal indicates
+ * which serial interface modes this board supports:
+ *
+ *	0x*0** - RS232
+ *	0x*1** - RS232/RS422/RS485
+ *	0x*3** - RS422/RS485
+ *	0x*6** - RS232
+ */
+static bool pci_moxa_match_second_digit(unsigned short device,
+					unsigned short pattern)
+{
+	return (device & 0x0F00) == pattern;
+}
+
+static int pci_moxa_set_interface(const struct pci_dev *dev,
+				  unsigned int port_idx,
+				  u8 mode)
+{
+	resource_size_t iobar_addr = pci_resource_start(dev, 2);
+	resource_size_t UIR_addr = iobar_addr + MOXA_UIR_OFFSET + port_idx / 2;
+	u8 val;
+
+	val = inb(UIR_addr);
+
+	if (port_idx % 2) {
+		val &= 0x0F;
+		val |= mode << 4;
+	} else {
+		val &= 0xF0;
+		val |= mode;
+	}
+	outb(val, UIR_addr);
+
+	return 0;
+}
+
 static int pci_moxa_init(struct pci_dev *dev)
 {
 	unsigned short device = dev->device;
 	resource_size_t iobar_addr = pci_resource_start(dev, 2);
+	unsigned int i;
 	unsigned int num_ports = (device & 0x00F0) >> 4;
 	u8 val;
 
+	/*
+	 * For the device IDs of MOXA PCIe boards match the pattern 0x*3**,
+	 * the initial default serial interface mode should be set to RS422.
+	 */
+	if (pci_moxa_match_second_digit(device, 0x0300)) {
+		for (i = 0; i < num_ports; ++i)
+			pci_moxa_set_interface(dev, i, MOXA_RS422);
+	}
 	/*
 	 * Enable hardware buffer to prevent break signal output when system boots up.
 	 * This hardware buffer is only supported on Mini PCIe series.
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ