[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231022151911.4279-1-aford173@gmail.com>
Date: Sun, 22 Oct 2023 10:19:11 -0500
From: Adam Ford <aford173@...il.com>
To: netdev@...r.kernel.org
Cc: aford@...conembedded.com, Adam Ford <aford173@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Grygorii Strashko <grygorii.strashko@...com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH V2] net: ethernet: davinci_emac: Use MAC Address from Device Tree
Currently there is a device tree entry called "local-mac-address"
which can be filled by the bootloader or manually set.This is
useful when the user does not want to use the MAC address
programmed into the SoC.
Currently, the davinci_emac reads the MAC from the DT, copies
it from pdata->mac_addr to priv->mac_addr, then blindly overwrites
it by reading from registers in the SoC, and falls back to a
random MAC if it's still not valid. This completely ignores any
MAC address in the device tree.
In order to use the local-mac-address, check to see if the contents
of priv->mac_addr are valid before falling back to reading from the
SoC when the MAC address is not valid.
Signed-off-by: Adam Ford <aford173@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
V2: Rebase, add R-B tag, and post stand-alone for netdev branch, since
the device tree patch has already been accepted via the omap tree.
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 23f8bc1cd20d..b0950a318c42 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1928,18 +1928,20 @@ static int davinci_emac_probe(struct platform_device *pdev)
goto err_free_rxchan;
ndev->irq = rc;
- rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr);
- if (!rc)
- eth_hw_addr_set(ndev, priv->mac_addr);
-
+ /* If the MAC address is not present, read the registers from the SoC */
if (!is_valid_ether_addr(priv->mac_addr)) {
- /* Use random MAC if still none obtained. */
- eth_hw_addr_random(ndev);
- memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len);
- dev_warn(&pdev->dev, "using random MAC addr: %pM\n",
- priv->mac_addr);
+ rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr);
+ if (!rc)
+ eth_hw_addr_set(ndev, priv->mac_addr);
+
+ if (!is_valid_ether_addr(priv->mac_addr)) {
+ /* Use random MAC if still none obtained. */
+ eth_hw_addr_random(ndev);
+ memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len);
+ dev_warn(&pdev->dev, "using random MAC addr: %pM\n",
+ priv->mac_addr);
+ }
}
-
ndev->netdev_ops = &emac_netdev_ops;
ndev->ethtool_ops = ðtool_ops;
netif_napi_add(ndev, &priv->napi, emac_poll);
--
2.40.1
Powered by blists - more mailing lists