| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2023102235-wafer-plethora-ac3c@gregkh>
Date: Sun, 22 Oct 2023 13:24:40 +0200
From: Greg KH <gregkh@...uxfoundation.org>
To: Florian Eckert <fe@....tdt.de>
Cc: Eckert.Florian@...glemail.com, jirislaby@...nel.org, pavel@....cz,
lee@...nel.org, kabel@...nel.org, u.kleine-koenig@...gutronix.de,
ansuelsmth@...il.com, m.brock@...mierlo.com,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
linux-leds@...r.kernel.org
Subject: Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
On Sun, Oct 22, 2023 at 12:24:27PM +0200, Florian Eckert wrote:
> On 2023-10-21 18:07, Greg KH wrote:
> > > diff --git a/drivers/leds/trigger/ledtrig-tty.c
> > > b/drivers/leds/trigger/ledtrig-tty.c
> > > index 8ae0d2d284af..6a96439a7e55 100644
> > > --- a/drivers/leds/trigger/ledtrig-tty.c
> > > +++ b/drivers/leds/trigger/ledtrig-tty.c
> > > @@ -16,6 +16,24 @@ struct ledtrig_tty_data {
> > > const char *ttyname;
> > > struct tty_struct *tty;
> > > int rx, tx;
> > > + unsigned long mode;
> >
> > Why is mode "unsigned long" when the tty layer treats it as an int? And
> > really, this should be set to an explit size, u32 perhaps? Or am I
> > confused as to exactly what this is?
>
> This is about the line state that the LED should show "altogether".
> All states that the LED is to display are stored here.
>
> For example:
> Via the sysfs of the LED I can set the flags rx, tx and line_cts to
> a "not" zero value. That means that the led is enable if the CTS of the
> tty ist set, and the LED flashes if rx/tx data are transmitted via
> this tty.
>
> Therefore, the bits 0 (TRIGGER_TTY_RX), 1 (TRIGGER_TTY_TX) and
> 2 (TRIGGER_TTY_CTS) are set in the variable. As defined in the
> enum led_trigger_tty_modes
So the enum is a bitfield value? That's not obvious either, a comment
for the enum might be good to help describe that.
> I think I have not chosen the correct name for the variable there.
> Maybe line_state, would be a better choice?
Or "trigger_modes"? "mode" feels odd, these are values, so maybe just
"triggers"?
Naming is hard :(
> > > +};
> > > +
> > > +enum led_trigger_tty_state {
> > > + TTY_LED_BLINK,
> > > + TTY_LED_ENABLE,
> > > + TTY_LED_DISABLE,
> > > +};
> > > +
> > > +enum led_trigger_tty_modes {
> > > + TRIGGER_TTY_RX = 0,
> > > + TRIGGER_TTY_TX,
> > > + TRIGGER_TTY_CTS,
> > > + TRIGGER_TTY_DSR,
> > > + TRIGGER_TTY_CAR,
> > > + TRIGGER_TTY_RNG,
> > > + /* Keep last */
> > > + __TRIGGER_TTY_MAX,
> > > };
> > >
> >
> > Oh wait, is "mode" this? If so, why not define it as an enum? Or if
> > not, I'm totally confused as to what is going on here, sorry.
>
> See explanation above. I can not set this to an enum because I could
> set more then one Flag via the sysfs.
Ah, then say they are bits, enums are usually not used for that, or if
they are, they are documented better :)
> > > static void ledtrig_tty_restart(struct ledtrig_tty_data
> > > *trigger_data)
> > > @@ -78,13 +96,106 @@ static ssize_t ttyname_store(struct device *dev,
> > > }
> > > static DEVICE_ATTR_RW(ttyname);
> > >
> > > +static ssize_t ledtrig_tty_attr_show(struct device *dev, char *buf,
> > > + enum led_trigger_tty_modes attr)
> > > +{
> > > + struct ledtrig_tty_data *trigger_data =
> > > led_trigger_get_drvdata(dev);
> > > + int bit;
> > > +
> > > + switch (attr) {
> > > + case TRIGGER_TTY_RX:
> > > + case TRIGGER_TTY_TX:
> > > + case TRIGGER_TTY_CTS:
> > > + case TRIGGER_TTY_DSR:
> > > + case TRIGGER_TTY_CAR:
> > > + case TRIGGER_TTY_RNG:
> > > + bit = attr;
> > > + break;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return sprintf(buf, "%u\n", test_bit(bit, &trigger_data->mode));
> >
> > sysfs_emit() for all new sysfs attributes please.
>
> Correct. Thanks for the hint will use sysf_emit() function in the next
> patchset round.
>
> >
> > > +}
> > > +
> > > +static ssize_t ledtrig_tty_attr_store(struct device *dev, const
> > > char *buf,
> > > + size_t size, enum led_trigger_tty_modes attr)
> > > +{
> > > + struct ledtrig_tty_data *trigger_data =
> > > led_trigger_get_drvdata(dev);
> > > + unsigned long state;
> > > + int ret;
> > > + int bit;
> > > +
> > > + ret = kstrtoul(buf, 0, &state);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + switch (attr) {
> > > + case TRIGGER_TTY_RX:
> > > + case TRIGGER_TTY_TX:
> > > + case TRIGGER_TTY_CTS:
> > > + case TRIGGER_TTY_DSR:
> > > + case TRIGGER_TTY_CAR:
> > > + case TRIGGER_TTY_RNG:
> > > + bit = attr;
> > > + break;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +
> > > + if (state)
> > > + set_bit(bit, &trigger_data->mode);
> > > + else
> > > + clear_bit(bit, &trigger_data->mode);
> >
> > I think your test of "state" here is wrong, if you write in "40000" you
> > are treating it as "1", which I don't think you want, right?
>
> If I have understood your question correctly, then I would say that your
> assumption is not correct. I just want to check here whether it is a number
> greater than zero or not. If the number is greater than zero then the bit
> should be set in the 'mode' variable of the struct and if it is zero then
> it should be cleared.
"greater than 0" can be any number, that's not a good api. Use the
sysfs api that can handle a boolean, it will deal with "y/N" and 0/1 and
all sorts of other options that way for you automatically.
> The LED could indicate more then one state there. As described above.
> This was requested by Uwe Kleine-König in the old v7 patch series [1].
That's fine, but you need to fix up the userspace api a bit here.
thanks,
greg k-h
Powered by blists - more mailing lists