linux-kernel - Re: [PATCH 2/2] ARM: dts: aspeed: Add ASRock E3C256D4I BMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e766e663-0985-4a2e-8023-26ad0228157d@hatter.bewilderbeest.net>
Date:   Tue, 14 Nov 2023 14:37:08 -0800
From:   Zev Weiss <zev@...ilderbeest.net>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...econstruct.com.au>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        openbmc@...ts.ozlabs.org
Subject: Re: [PATCH 2/2] ARM: dts: aspeed: Add ASRock E3C256D4I BMC

On Tue, Nov 14, 2023 at 12:35:37PM PST, Krzysztof Kozlowski wrote:
>On 14/11/2023 12:27, Zev Weiss wrote:
>> Like the E3C246D4I, this is a reasonably affordable off-the-shelf
>> mini-ITX AST2500/Xeon motherboard with good potential as an OpenBMC
>> development platform.  Booting the host requires a modicum of eSPI
>> support that's not yet in the mainline kernel, but most other basic
>> BMC functionality is available with this device-tree.
>>
>> Signed-off-by: Zev Weiss <zev@...ilderbeest.net>
>> ---
>>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>>  .../aspeed/aspeed-bmc-asrock-e3c256d4i.dts    | 314 ++++++++++++++++++
>>  2 files changed, 315 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
>>
>> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
>> index d3ac20e316d0..3398ee53f034 100644
>> --- a/arch/arm/boot/dts/aspeed/Makefile
>> +++ b/arch/arm/boot/dts/aspeed/Makefile
>> @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>>  	aspeed-bmc-ampere-mtmitchell.dtb \
>>  	aspeed-bmc-arm-stardragon4800-rep2.dtb \
>>  	aspeed-bmc-asrock-e3c246d4i.dtb \
>> +	aspeed-bmc-asrock-e3c256d4i.dtb \
>>  	aspeed-bmc-asrock-romed8hm3.dtb \
>>  	aspeed-bmc-bytedance-g220a.dtb \
>>  	aspeed-bmc-delta-ahe50dc.dtb \
>> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
>> new file mode 100644
>> index 000000000000..4c55272afd4f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
>> @@ -0,0 +1,314 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/dts-v1/;
>> +
>> +#include "aspeed-g5.dtsi"
>> +#include <dt-bindings/gpio/aspeed-gpio.h>
>> +#include <dt-bindings/i2c/i2c.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/watchdog/aspeed-wdt.h>
>> +
>> +/{
>> +	model = "ASRock E3C256D4I BMC";
>> +	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
>> +
>> +	aliases {
>> +		serial4 = &uart5;
>> +
>> +		i2c20 = &i2c2mux0ch0;
>> +		i2c21 = &i2c2mux0ch1;
>> +		i2c22 = &i2c2mux0ch2;
>> +		i2c23 = &i2c2mux0ch3;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = &uart5;
>> +		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
>
>Drop bootargs.
>

Ack.

>> +	};
>> +
>> +	memory@...00000 {
>> +		reg = <0x80000000 0x20000000>;
>> +	};
>> +
>> +	leds {
>> +		compatible = "gpio-leds";
>> +
>> +		heartbeat {
>
>It does not look like you tested the DTS against bindings. Please run
>`make dtbs_check W=1` (see
>Documentation/devicetree/bindings/writing-schema.rst or
>https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
>for instructions).
>

As with my spc621d8hm3 dts patch, I did run that and got no output, so 
if there are other specific problems please let me know what they are.

>> +			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
>> +			linux,default-trigger = "timer";
>
>Missing function and color.
>

Ack.


Thanks,
Zev