linux-kernel - [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 29 Nov 2023 16:16:11 +0100
From:   Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
To:     davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, linux-usb@...r.kernel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     jtornosm@...hat.com
Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded. Avoid these unnecessary operations
when the device is detached (state is USB_STATE_NOTATTACHED) so as
not to get the error messages.

Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
---
 drivers/net/usb/ax88179_178a.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..e78d555dd95e 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1308,16 +1308,18 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
 	struct ax88179_data *ax179_data = dev->driver_priv;
 	u16 tmp16;
 
-	/* Configure RX control register => stop operation */
-	tmp16 = AX_RX_CTL_STOP;
-	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+	if (dev->udev->state != USB_STATE_NOTATTACHED) {
+		/* Configure RX control register => stop operation */
+		tmp16 = AX_RX_CTL_STOP;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
 
-	tmp16 = 0;
-	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+		tmp16 = 0;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
 
-	/* Power down ethernet PHY */
-	tmp16 = 0;
-	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+		/* Power down ethernet PHY */
+		tmp16 = 0;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+	}
 
 	kfree(ax179_data);
 }
@@ -1663,11 +1665,13 @@ static int ax88179_stop(struct usbnet *dev)
 {
 	u16 tmp16;
 
-	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+	if (dev->udev->state != USB_STATE_NOTATTACHED) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			 2, 2, &tmp16);
-	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
-	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+		tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			  2, 2, &tmp16);
+	}
 
 	return 0;
 }
-- 
2.43.0