| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231129151637.GG24293@pendragon.ideasonboard.com>
Date: Wed, 29 Nov 2023 17:16:37 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Alexander Stein <alexander.stein@...tq-group.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
Paul Elder <paul.elder@...asonboard.com>,
kieran.bingham@...asonboard.com, tomi.valkeinen@...asonboard.com,
umang.jain@...asonboard.com, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Tim Harvey <tharvey@...eworks.com>,
Philippe Schenker <philippe.schenker@...adex.com>,
Marek Vasut <marex@...x.de>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
open list <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances
Hi Alexander,
On Wed, Nov 29, 2023 at 11:20:07AM +0100, Alexander Stein wrote:
> Am Mittwoch, 29. November 2023, 10:31:13 CET schrieb Paul Elder:
> > From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> >
> > Add two overlay to enable each ISP instance. The ISP is wired directly
> > to the CSIS for now, bypassing the ISI completely.
>
> I'm not sure if this is worth adding in a separate overlay.
The trouble is that, at this point, selection between the ISP and the
ISI can only be performed through DT :-S That's why this is implemented
as an overlay.
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> > Signed-off-by: Paul Elder <paul.elder@...asonboard.com>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 2 ++
> > .../arm64/boot/dts/freescale/imx8mp-isp1.dtso | 36 +++++++++++++++++++
> > .../arm64/boot/dts/freescale/imx8mp-isp2.dtso | 36 +++++++++++++++++++
> > 3 files changed, 74 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile index 300049037eb0..f97dfac11189
> > 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp1.dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp2.dtbo
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso new file mode 100644
> > index 000000000000..cf394ed224ab
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > @@ -0,0 +1,36 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2022 Ideas on Board Oy
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/media/video-interfaces.h>
> > +
> > +&isi_0 {
> > + status = "disabled";
>
> ISI is disabled by default. What is your intention here?
It could be enabled by an overlay for a camera module. Ideally we want
to be able to enable both the ISI and ISP at runtime, but that's not
possible yet and will require a very large amount of work.
> > +
> > + ports {
> > + port@0 {
> > + /delete-node/ endpoint;
>
> This doesn't work in overlays. See [1]. Otherwise the OF graph connections
> look fine to me. I'm using the same in my local overlay.
Interesting, I wasn't aware of that. Maybe we should fix it :-)
> [1] https://lore.kernel.org/all/CAMuHMdWu4KZbBkvEofUV2wuA1g2S=XHHM3RUN1cNrcZBkhsPZA@mail.gmail.com/
>
> > + };
> > + };
> > +};
> > +
> > +&isp_0 {
> > + status = "okay";
> > +
> > + ports {
> > + port@1 {
> > + isp0_in: endpoint {
> > + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> > + remote-endpoint = <&mipi_csi_0_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&mipi_csi_0_out {
> > + remote-endpoint = <&isp0_in>;
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> > b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso new file mode 100644
> > index 000000000000..14e2e7b2617f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> > @@ -0,0 +1,36 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2022 Ideas on Board Oy
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/media/video-interfaces.h>
> > +
> > +&isi_0 {
> > + status = "disabled";
> > +
> > + ports {
> > + port@1 {
> > + /delete-node/ endpoint;
> > + };
> > + };
> > +};
> > +
> > +&isp_1 {
> > + status = "okay";
> > +
> > + ports {
> > + port@1 {
> > + isp1_in: endpoint {
> > + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> > + remote-endpoint = <&mipi_csi_1_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&mipi_csi_1_out {
> > + remote-endpoint = <&isp1_in>;
> > +};
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists