linux-kernel - Re: [PATCHv2] mmc: rpmb: add quirk MMC_QUIRK_BROKEN_RPMB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZWkKgU+J9atnJdqT@trax>
Date:   Thu, 30 Nov 2023 23:19:45 +0100
From:   "Jorge Ramirez-Ortiz, Foundries" <jorge@...ndries.io>
To:     "Jorge Ramirez-Ortiz, Foundries" <jorge@...ndries.io>
Cc:     Adrian Hunter <adrian.hunter@...el.com>, CLoehle@...erstone.com,
        jinpu.wang@...os.com, hare@...e.de,
        Ulf Hansson <ulf.hansson@...aro.org>, beanhuo@...ron.com,
        yangyingliang@...wei.com, asuk4.q@...il.com, yibin.ding@...soc.com,
        victor.shih@...esyslogic.com.tw, marex@...x.de,
        rafael.beims@...adex.com, robimarko@...il.com,
        ricardo@...ndries.io, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCHv2] mmc: rpmb: add quirk MMC_QUIRK_BROKEN_RPMB_RETUNE

On 30/11/23 23:02:15, Jorge Ramirez-Ortiz, Foundries wrote:
> On 30/11/23 21:12:28, Adrian Hunter wrote:
> > On 30/11/23 15:24, Jorge Ramirez-Ortiz, Foundries wrote:
> > > On 30/11/23 11:34:18, Ulf Hansson wrote:
> > >> On Wed, 29 Nov 2023 at 17:05, Jorge Ramirez-Ortiz <jorge@...ndries.io> wrote:
> > >>>
> > >>> On the eMMC SanDisk iNAND 7250 configured with HS200, requesting a
> > >>> re-tune before switching to the RPMB partition would randomly cause
> > >>> subsequent RPMB requests to fail with EILSEQ:
> > >>> * data error -84, tigggered in __mmc_blk_ioctl_cmd()
> > >>>
> > >>> This commit skips the retune when switching to RPMB.
> > >>> Tested over several days with per minute RPMB reads.
> > >>
> > >> This sounds weird to me and needs more testing/debugging in my
> > >> opinion, especially at the host driver level. Perhaps add some new
> > >> tests in mmc_test, that does a partition switch to/from any partition
> > >> and then run regular I/O again to see if the problem is easier to
> > >> reproduce?
> > >
> > > hi Uffe
> > >
> > > ok I'll have a look - I have never used this driver before, so if you
> > > have anything in the works I'll be glad to integrated and adapt.
> > >
> > >>
> > >> The point is, I wonder what is so special with RPMB here? Note that,
> > >> it has been quite common that host drivers/controllers have had issues
> > >> with their tuning support, so I would not be surprised if that is the
> > >> case here too.
> > >
> > > Right, it is just that the tuning function for of-arasan is the generic
> > > __sdhci_execute_tuning() - only wrapped around arasan DLL reset
> > > calls. Hence why I aimed for the card: __sdhci_execute_tuning and ZynqMP
> > > are not recent functions or architectures.
> > >
> > >
> > >> Certainly I would be surprised if the problem is at
> > >> the eMMC card side, but I may be wrong.
> > >
> > > How do maintainers test the tuning methods? is there anything else for
> > > me to do other than forcing a retune with different partitions?
> > >
> > >>
> > >> Kind regards
> > >> Uffe
> > >
> > > For completeness this is the error message - notice that we have a
> > > trusted application (fiovb) going through OP-TEE and back to the TEE
> > > supplicant issuing an rpmb read of a variable (pretty normal these days,
> > > we use it on many different platforms - ST, NXP, AMD/Xilinx, TI..).
> > >
> > > The issue on this Zynqmp platform is scarily simple to reproduce; you
> > > can ignore the OP-TEE trace, it is just the TEE way of reporting that
> > > the RPMB read failed.
> > >
> > > root@...cg-dwg-sec:/var/rootdirs/home/fio# fiovb_printenv m4hash
> > > [  461.775084] sdhci-arasan ff160000.mmc: __mmc_blk_ioctl_cmd: data error -84
> > > E/TC:? 0
> > > E/TC:? 0 TA panicked with code 0xffff0000
> > > E/LD:  Status of TA 22250a54-0bf1-48fe-8002-7b20f1c9c9b1
> > > E/LD:   arch: aarch64
> > > E/LD:  region  0: va 0xc0004000 pa 0x7e200000 size 0x002000 flags rw-s (ldelf)
> > > E/LD:  region  1: va 0xc0006000 pa 0x7e202000 size 0x008000 flags r-xs (ldelf)
> > > E/LD:  region  2: va 0xc000e000 pa 0x7e20a000 size 0x001000 flags rw-s (ldelf)
> > > E/LD:  region  3: va 0xc000f000 pa 0x7e20b000 size 0x004000 flags rw-s (ldelf)
> > > E/LD:  region  4: va 0xc0013000 pa 0x7e20f000 size 0x001000 flags r--s
> > > E/LD:  region  5: va 0xc0014000 pa 0x7e22c000 size 0x005000 flags rw-s (stack)
> > > E/LD:  region  6: va 0xc0019000 pa 0x816b31fc8 size 0x001000 flags rw-- (param)
> > > E/LD:  region  7: va 0xc001a000 pa 0x816aa1fc8 size 0x002000 flags rw-- (param)
> > > E/LD:  region  8: va 0xc006b000 pa 0x00001000 size 0x014000 flags r-xs [0]
> > > E/LD:  region  9: va 0xc007f000 pa 0x00015000 size 0x008000 flags rw-s [0]
> > > E/LD:   [0] 22250a54-0bf1-48fe-8002-7b20f1c9c9b1 @ 0xc006b000
> > > E/LD:  Call stack:
> > > E/LD:   0xc006de58
> > > E/LD:   0xc006b388
> > > E/LD:   0xc006ed40
> > > E/LD:   0xc006b624
> > > Read persistent value for m4hash failed: Exec format error
> >
> > Have you tried dynamic debug for mmc
> >
> >     Kernel must be configured:
> >
> >         CONFIG_DYNAMIC_DEBUG=y
> >
> >     To enable mmc debug via sysfs:
> >
> >         echo 'file drivers/mmc/core/* +p' > /sys/kernel/debug/dynamic_debug/control
> >         echo 'file drivers/mmc/host/* +p' > /sys/kernel/debug/dynamic_debug/control
> >
> >
>
> hi Adrian
>
> Sure, this is the output of the trace:
>
> [  422.018756] mmc0: sdhci: IRQ status 0x00000020
> [  422.018789] mmc0: sdhci: IRQ status 0x00000020
> [  422.018817] mmc0: sdhci: IRQ status 0x00000020
> [  422.018848] mmc0: sdhci: IRQ status 0x00000020
> [  422.018875] mmc0: sdhci: IRQ status 0x00000020
> [  422.018902] mmc0: sdhci: IRQ status 0x00000020
> [  422.018932] mmc0: sdhci: IRQ status 0x00000020
> [  422.020013] mmc0: sdhci: IRQ status 0x00000001
> [  422.020027] mmc0: sdhci: IRQ status 0x00000002
> [  422.020034] mmc0: req done (CMD6): 0: 00000800 00000000 00000000 00000000
> [  422.020054] mmc0: starting CMD13 arg 00010000 flags 00000195
> [  422.020068] mmc0: sdhci: IRQ status 0x00000001
> [  422.020076] mmc0: req done (CMD13): 0: 00000900 00000000 00000000 00000000
> [  422.020092] <mmc0: starting CMD23 arg 00000001 flags 00000015>
> [  422.020101] mmc0: starting CMD25 arg 00000000 flags 00000035
> [  422.020108] mmc0:     blksz 512 blocks 1 flags 00000100 tsac 400 ms nsac 0
> [  422.020124] mmc0: sdhci: IRQ status 0x00000001
> [  422.021671] mmc0: sdhci: IRQ status 0x00000002
> [  422.021691] mmc0: req done <CMD23>: 0: 00000000 00000000 00000000 00000000
> [  422.021700] mmc0: req done (CMD25): 0: 00000900 00000000 00000000 00000000
> [  422.021708] mmc0:     512 bytes transferred: 0
> [  422.021728] mmc0: starting CMD13 arg 00010000 flags 00000195
> [  422.021743] mmc0: sdhci: IRQ status 0x00000001
> [  422.021752] mmc0: req done (CMD13): 0: 00000900 00000000 00000000 00000000
> [  422.021771] <mmc0: starting CMD23 arg 00000001 flags 00000015>
> [  422.021779] mmc0: starting CMD18 arg 00000000 flags 00000035
> [  422.021785] mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
> [  422.021804] mmc0: sdhci: IRQ status 0x00000001
> [  422.022566] mmc0: sdhci: IRQ status 0x00208000 <---------------------------------- this doesnt seem right
> [  422.022629] mmc0: req done <CMD23>: 0: 00000000 00000000 00000000 00000000
> [  422.022639] mmc0: req done (CMD18): 0: 00000900 00000000 00000000 00000000
> [  422.022647] mmc0:     0 bytes transferred: -84 < --------------------------------- it should have transfered 4096 bytes
> [  422.022669] sdhci-arasan ff160000.mmc: __mmc_blk_ioctl_cmd: data error -84
> [  422.029619] mmc0: starting CMD6 arg 03b30001 flags 0000049d
> [  422.029636] mmc0: sdhci: IRQ status 0x00000001
> [  422.029652] mmc0: sdhci: IRQ status 0x00000002
> [  422.029660] mmc0: req done (CMD6): 0: 00000800 00000000 00000000 00000000
> [  422.029680] mmc0: starting CMD13 arg 00010000 flags 00000195
> [  422.029693] mmc0: sdhci: IRQ status 0x00000001
> [  422.029702] mmc0: req done (CMD13): 0: 00000900 00000000 00000000 00000000
> [  422.196996] <mmc0: starting CMD23 arg 00000400 flags 00000015>
> [  422.197051] mmc0: starting CMD25 arg 058160e0 flags 000000b5
> [  422.197079] mmc0:     blksz 512 blocks 1024 flags 00000100 tsac 400 ms nsac 0
> [  422.197110] mmc0:     CMD12 arg 00000000 flags 0000049d
> [  422.199455] mmc0: sdhci: IRQ status 0x00000020
> [  422.199526] mmc0: sdhci: IRQ status 0x00000020
> [  422.199585] mmc0: sdhci: IRQ status 0x00000020
> [  422.199641] mmc0: sdhci: IRQ status 0x00000020
> [  422.199695] mmc0: sdhci: IRQ status 0x00000020
> [  422.199753] mmc0: sdhci: IRQ status 0x00000020
> [  422.199811] mmc0: sdhci: IRQ status 0x00000020
> [  422.199865] mmc0: sdhci: IRQ status 0x00000020
> [  422.199919] mmc0: sdhci: IRQ status 0x00000020
> [  422.199972] mmc0: sdhci: IRQ status 0x00000020
> [  422.200026] mmc0: sdhci: IRQ status 0x00000020
>
>
> does this help?
>
> thanks
> Jorge