linux-kernel - [PATCH 3/3] arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231201082045.790478-4-b-kapoor@ti.com>
Date:   Fri, 1 Dec 2023 13:50:45 +0530
From:   Bhavya Kapoor <b-kapoor@...com>
To:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <conor+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <robh+dt@...nel.org>, <kristo@...nel.org>, <vigneshr@...com>,
        <nm@...com>, <b-kapoor@...com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode

DDR50 speed mode is enabled for MMCSD in J784s4 but its Itap Delay
Value is not present in the device tree. Thus, add Itap Delay Value
for MMCSD High Speed DDR which is DDR50 speed mode for J784s4 SoC
according to datasheet for J784s4.

[+] Refer to : section 7.10.5.17.2 MMC1/2 - SD/SDIO Interface, in
	J784s4 datasheet
- https://www.ti.com/lit/ds/symlink/tda4vh-q1.pdf

Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d89bcddcfe3d..b9a2358b1459 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -712,6 +712,7 @@ main_sdhci1: mmc@...0000 {
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
-- 
2.34.1