| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 1 Dec 2023 13:50:44 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <conor+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<robh+dt@...nel.org>, <kristo@...nel.org>, <vigneshr@...com>,
<nm@...com>, <b-kapoor@...com>
Subject: [PATCH 2/3] arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode
DDR50 speed mode is enabled for MMCSD in J721s2 but its Itap Delay
Value is not present in the device tree. Thus, add Itap Delay Value
for MMCSD High Speed DDR which is DDR50 speed mode for J721s2 SoC
according to datasheet for J721s2.
[+] Refer to : section 7.10.5.17.2 MMC1/2 - SD/SDIO Interface, in
J721s2 datasheet
- https://www.ti.com/lit/ds/symlink/tda4vl-q1.pdf
Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b03731b53a26..e1255956288b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -766,6 +766,7 @@ main_sdhci1: mmc@...0000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
--
2.34.1
Powered by blists - more mailing lists