linux-kernel - Re: [PATCH 0/3] arm64: dts: ti: Add Itap Delay Value For High Speed DDR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 6 Dec 2023 00:01:49 +0530
From:   "Kumar, Udit" <u-kumar1@...com>
To:     Bhavya Kapoor <b-kapoor@...com>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <conor+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <robh+dt@...nel.org>, <kristo@...nel.org>, <vigneshr@...com>,
        <nm@...com>, <u-kumar1@...com>
Subject: Re: [PATCH 0/3] arm64: dts: ti: Add Itap Delay Value For High Speed
 DDR

Hi Bhavya

On 12/1/2023 1:50 PM, Bhavya Kapoor wrote:
> This Series adds Itap Delay Value for DDR52 speed mode for eMMC in
> J7200 and for DDR50 speed mode for MMCSD in J721s2 and J784s4 SoC.
>
> Rebased to next-20231201
>
> Bhavya Kapoor (3):
>    arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed
>      mode
>    arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed
>      mode
>    arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed
>      mode

Could you confirm, after adding itap values, above modes are working 
fine apart from

mode detection.

Thanks

Udit


>   arch/arm64/boot/dts/ti/k3-j7200-main.dtsi  | 1 +
>   arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 1 +
>   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 1 +
>   3 files changed, 3 insertions(+)
>