| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231204161652.GA3428@kb-xps>
Date: Mon, 4 Dec 2023 17:16:52 +0100
From: Kamel Bouhara <kamel.bouhara@...tlin.com>
To: POPESCU Catalin <catalin.popescu@...ca-geosystems.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Henrik Rydberg <rydberg@...math.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Marco Felsch <m.felsch@...gutronix.de>,
Jeff LaBundy <jeff@...undy.com>,
"mark.satterthwaite@...chnetix.com"
<mark.satterthwaite@...chnetix.com>,
"bartp@...sheep.co.uk" <bartp@...sheep.co.uk>,
"hannah.rossiter@...chnetix.com" <hannah.rossiter@...chnetix.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Gregory Clement <gregory.clement@...tlin.com>,
GEO-CHHER-bsp-development
<bsp-development.geo@...ca-geosystems.com>
Subject: Re: [PATCH v4 3/3] Input: Add TouchNetix axiom i2c touchscreen driver
Le Mon, Dec 04, 2023 at 03:09:58PM +0000, POPESCU Catalin a écrit :
> On 04.12.23 15:05, Kamel Bouhara wrote:
> > This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email.
> >
> >
> > Add a new driver for the TouchNetix's axiom family of
> > touchscreen controllers. This driver only supports i2c
> > and can be later adapted for SPI and USB support.
> >
> > Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> > ---
> > MAINTAINERS | 1 +
> > drivers/input/touchscreen/Kconfig | 12 +
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/touchnetix_axiom.c | 675 +++++++++++++++++++
> > 4 files changed, 689 insertions(+)
> > create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 4752d8436dbb..337ddac6c74b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -21436,6 +21436,7 @@ M: Kamel Bouhara <kamel.bouhara@...tlin.com>
> > L: linux-input@...r.kernel.org
> > S: Maintained
> > F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml
> > +F: drivers/input/touchscreen/touchnetix_axiom.c
> >
> > THUNDERBOLT DMA TRAFFIC TEST DRIVER
> > M: Isaac Hazan <isaac.hazan@...el.com>
> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > index e3e2324547b9..f36bee8d8696 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -803,6 +803,18 @@ config TOUCHSCREEN_MIGOR
> > To compile this driver as a module, choose M here: the
> > module will be called migor_ts.
> >
> > +config TOUCHSCREEN_TOUCHNETIX_AXIOM
> > + tristate "TouchNetix AXIOM based touchscreen controllers"
> > + depends on I2C
> > + help
> > + Say Y here if you have a axiom touchscreen connected to
> > + your system.
> > +
> > + If unsure, say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called axiom.
> > +
> > config TOUCHSCREEN_TOUCHRIGHT
> > tristate "Touchright serial touchscreen"
> > select SERIO
> > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > index 62bd24f3ac8e..8e32a2df5e18 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -88,6 +88,7 @@ obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
> > obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o
> > obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
> > obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
> > +obj-$(CONFIG_TOUCHSCREEN_TOUCHNETIX_AXIOM) += touchnetix_axiom.o
> > obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
> > obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
> > obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o
> > diff --git a/drivers/input/touchscreen/touchnetix_axiom.c b/drivers/input/touchscreen/touchnetix_axiom.c
> > new file mode 100644
> > index 000000000000..9783e89f9e3a
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/touchnetix_axiom.c
> > @@ -0,0 +1,675 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * TouchNetix axiom Touchscreen Driver
> > + *
> > + * Copyright (C) 2020-2023 TouchNetix Ltd.
> > + *
> > + * Author(s): Bart Prescott <bartp@...sheep.co.uk>
> > + * Pedro Torruella <pedro.torruella@...chnetix.com>
> > + * Mark Satterthwaite <mark.satterthwaite@...chnetix.com>
> > + * Hannah Rossiter <hannah.rossiter@...chnetix.com>
> > + * Kamel Bouhara <kamel.bouhara@...tlin.com>
> > + *
> > + */
> > +#include <linux/bitfield.h>
> > +#include <linux/crc16.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/input.h>
> > +#include <linux/input/mt.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +
> > +#define AXIOM_PROX_LEVEL -128
> > +/*
> > + * Register group u31 has 2 pages for usage table entries.
> > + */
> > +#define AXIOM_U31_MAX_USAGES ((2 * AXIOM_COMMS_PAGE_SIZE) / AXIOM_U31_BYTES_PER_USAGE)
> > +#define AXIOM_U31_BYTES_PER_USAGE 6
> > +#define AXIOM_U31_PAGE0_LENGTH 0x0C
> > +#define AXIOM_U31_BOOTMODE_MASK BIT(7)
> > +#define AXIOM_U31_DEVID_MASK GENMASK(14, 0)
> > +
> > +#define AXIOM_CMD_HEADER_READ_MASK BIT(15)
> > +#define AXIOM_U41_MAX_TARGETS 10
> > +
> > +#define AXIOM_U46_AUX_CHANNELS 4
> > +#define AXIOM_U46_AUX_MASK GENMASK(11, 0)
> > +
> > +#define AXIOM_COMMS_MAX_USAGE_PAGES 3
> > +#define AXIOM_COMMS_PAGE_SIZE 256
> > +#define AXIOM_COMMS_REPORT_LEN_MASK GENMASK(6, 0)
> > +
> > +#define AXIOM_REPORT_USAGE_ID 0x34
> > +#define AXIOM_DEVINFO_USAGE_ID 0x31
> > +#define AXIOM_USAGE_2HB_REPORT_ID 0x01
> > +#define AXIOM_USAGE_2AUX_REPORT_ID 0x46
> > +#define AXIOM_USAGE_2DCTS_REPORT_ID 0x41
> > +
> > +#define AXIOM_PAGE_OFFSET_MASK GENMASK(6, 0)
> > +
> > +struct axiom_devinfo {
> > + u16 device_id;
> > + u8 fw_minor;
> > + u8 fw_major;
> > + u8 fw_info_extra;
> > + u8 tcp_revision;
> > + u8 bootloader_fw_minor;
> > + u8 bootloader_fw_major;
> > + u16 jedec_id;
> > + u8 num_usages;
> > +} __packed;
> > +
> > +/*
> > + * Describes parameters of a specific usage, essentially a single element of
> > + * the "Usage Table"
> > + */
> > +struct axiom_usage_entry {
> > + u8 id;
> > + u8 is_report;
> > + u8 start_page;
> > + u8 num_pages;
> > +};
> > +
> > +/*
> > + * Represents state of a touch or target when detected prior a touch (eg.
> > + * hover or proximity events).
> > + */
> > +enum axiom_target_state {
> > + AXIOM_TARGET_STATE_NOT_PRESENT = 0,
> > + AXIOM_TARGET_STATE_PROX = 1,
> > + AXIOM_TARGET_STATE_HOVER = 2,
> > + AXIOM_TARGET_STATE_TOUCHING = 3,
> > +};
> > +
> > +struct axiom_u41_target {
> > + enum axiom_target_state state;
> > + u16 x;
> > + u16 y;
> > + s8 z;
> > + bool insert;
> > + bool touch;
> > +};
> > +
> > +struct axiom_target_report {
> > + u8 index;
> > + u8 present;
> > + u16 x;
> > + u16 y;
> > + s8 z;
> > +};
> > +
> > +struct axiom_cmd_header {
> > + __le16 target_address;
> > + __le16 length;
> > +} __packed;
> > +
> > +struct axiom_data {
> > + struct axiom_devinfo devinfo;
> > + struct device *dev;
> > + struct gpio_desc *reset_gpio;
> > + struct i2c_client *client;
> > + struct input_dev *input_dev;
> > + u32 max_report_len;
> > + char rx_buf[AXIOM_COMMS_MAX_USAGE_PAGES * AXIOM_COMMS_PAGE_SIZE];
> > + struct axiom_u41_target targets[AXIOM_U41_MAX_TARGETS];
> > + struct axiom_usage_entry usage_table[AXIOM_U31_MAX_USAGES];
> > + bool usage_table_populated;
> > + struct regulator *vdda;
> > + struct regulator *vddi;
> > +};
> > +
> > +/*
> > + * axiom devices are typically configured to report
> > + * touches at a rate of 100Hz (10ms). For systems
> > + * that require polling for reports.
> > + * When reports are polled, it will be expected to
> > + * occasionally observe the overflow bit being set
> > + * in the reports. This indicates that reports are not
> > + * being read fast enough.
> > + */
> > +#define POLL_INTERVAL_DEFAULT_MS 10
> > +
> > +/* Translate usage/page/offset triplet into physical address. */
> > +static u16 axiom_usage_to_target_address(struct axiom_data *ts, char usage, char page,
> > + char offset)
> > +{
> > + struct axiom_usage_entry *usage_table;
> > + struct axiom_devinfo *device_info;
> > + u32 i;
> > +
> > + device_info = &ts->devinfo;
> > + usage_table = ts->usage_table;
> > +
> > + /* At the moment the convention is that u31 is always at physical address 0x0 */
> > + if (!ts->usage_table_populated) {
> > + if (usage == AXIOM_DEVINFO_USAGE_ID)
> > + return ((page << 8) + offset);
> > + else
> > + return 0xffff;
> > + }
> > +
> > + for (i = 0; i < ts->devinfo.num_usages; i++) {
> > + if (usage_table[i].id != usage)
> > + continue;
> > +
> > + if (page >= usage_table[i].num_pages) {
> > + dev_err(ts->dev, "Invalid usage table! usage: %u, page: %u, offset: %u\n",
> > + usage, page, offset);
> > + return 0xffff;
> > + }
> > + break;
> > + }
> > +
> > + return ((usage_table[i].start_page + page) << 8) + offset;
> > +}
> > +
> > +static int axiom_i2c_read(struct i2c_client *client, u8 usage, u8 page, u8 *buf, u16 len)
> > +{
> > + struct axiom_data *ts = i2c_get_clientdata(client);
> > + struct axiom_cmd_header cmd_header;
> > + u8 buffer[sizeof(cmd_header) + AXIOM_COMMS_PAGE_SIZE];
> > + struct i2c_msg msg;
> > + int error;
> > +
> > + cmd_header.target_address = cpu_to_le16(axiom_usage_to_target_address(ts, usage, page, 0));
> > + cmd_header.length = cpu_to_le16(len | AXIOM_CMD_HEADER_READ_MASK);
> > +
> > + memcpy(&buffer[0], &cmd_header, sizeof(cmd_header));
> > + memcpy(&buffer[sizeof(cmd_header)], buf, len);
>
> You're copying a buffer that is meant to hold the response which makes
> no sense.
> Please stick to the original implementation which transfers 2 messages :
> - first is the header (you're telling the controller what you want to
> read) : this is a write and flags should be 0.
> - second is the actual read message : flags should be I2C_M_RD
This was not supposed to be applied on read but rather axiom_i2c_write().
Fixed for v5, thanks.
>
> > +
> > + msg.addr = client->addr;
> > + msg.flags = 0;
> > + msg.len = len + sizeof(cmd_header);
> > + msg.buf = (u8 *)buffer;
> > +
> > + error = i2c_transfer(client->adapter, &msg, 1);
> > + if (error != 1) {
> You should transfer 2 messages (see above).
> > + dev_err(&client->dev,
> > + "Failed reading usage %#x page %#x, error=%d\n",
> > + usage, page, error);
> > + return error;
> > + }
> > +
> > + usleep_range(100, 250);
> The delay here is not enough as Touchnetix confirmed that we would need
> 250 usecs for the controller's internal DMA to be ready after an i2c
> transfer.
Ok that wasn't clear if it was after 2 consecutives reads but now it is.
Maybe Mark can confirm again ?
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * One of the main purposes for reading the usage table is to identify
> > + * which usages reside at which TA address.
> > + * When performing subsequent reads or writes to AXIOM, the TA is used
> > + * to specify which usage is being accessed.
> > + * Consider the following discovery code which will build up the usage table.
> > + */
> > +static u32 axiom_populate_usage_table(struct axiom_data *ts)
> > +{
> > + struct axiom_usage_entry *usage_table;
> > + u32 max_report_len = 0;
> > + char *rx_data = ts->rx_buf;
> > + u32 usage_id;
> > + int error;
> > +
> > + usage_table = ts->usage_table;
> > +
> > + /* Read the second page of usage u31 to get the usage table */
> > + error = axiom_i2c_read(ts->client, AXIOM_DEVINFO_USAGE_ID, 1, rx_data,
> > + (AXIOM_U31_BYTES_PER_USAGE * ts->devinfo.num_usages));
> > + if (error)
> > + return error;
> > +
> > + for (usage_id = 0; usage_id < ts->devinfo.num_usages; usage_id++) {
> > + u16 offset = (usage_id * AXIOM_U31_BYTES_PER_USAGE);
> > + u8 id = rx_data[offset + 0];
> > + u8 start_page = rx_data[offset + 1];
> > + u8 num_pages = rx_data[offset + 2];
> > + u32 max_offset = ((rx_data[offset + 3] & AXIOM_PAGE_OFFSET_MASK) + 1) * 2;
> > +
> > + if (!num_pages)
> > + usage_table[usage_id].is_report = true;
> > +
> > + /* Store the entry into the usage table */
> > + usage_table[usage_id].id = id;
> > + usage_table[usage_id].start_page = start_page;
> > + usage_table[usage_id].num_pages = num_pages;
> > +
> > + dev_dbg(ts->dev, "Usage u%02x Info: %*ph\n", id,
> > + AXIOM_U31_BYTES_PER_USAGE, &rx_data[offset]);
> > +
> > + /* Identify the max report length the module will receive */
> > + if (usage_table[usage_id].is_report && max_offset > max_report_len)
> > + max_report_len = max_offset;
> > + }
> > +
> > + ts->usage_table_populated = true;
> > +
> > + return max_report_len;
> > +}
> > +
> > +static int axiom_discover(struct axiom_data *ts)
> > +{
> > + int error;
> > +
> > + /*
> > + * Fetch the first page of usage u31 to get the
> > + * device information and the number of usages
> > + */
> > + error = axiom_i2c_read(ts->client, AXIOM_DEVINFO_USAGE_ID, 0, (char *)&ts->devinfo,
> > + AXIOM_U31_PAGE0_LENGTH);
> > + if (error)
> > + return error;
> > +
> > + dev_dbg(ts->dev, " Boot Mode : %s\n",
> > + FIELD_GET(AXIOM_U31_BOOTMODE_MASK, ts->devinfo.device_id) ? "BLP" : "TCP");
> > + dev_dbg(ts->dev, " Device ID : %04lx\n",
> > + FIELD_GET(AXIOM_U31_DEVID_MASK, ts->devinfo.device_id));
> > + dev_dbg(ts->dev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major,
> > + ts->devinfo.fw_minor);
> > + dev_dbg(ts->dev, " Bootloader Rev : %02x.%02x\n", ts->devinfo.bootloader_fw_major,
> > + ts->devinfo.bootloader_fw_minor);
> > + dev_dbg(ts->dev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra);
> > + dev_dbg(ts->dev, " Silicon : %04x\n", ts->devinfo.jedec_id);
> > + dev_dbg(ts->dev, " Number usages : %04x\n", ts->devinfo.num_usages);
> > +
> > + ts->max_report_len = axiom_populate_usage_table(ts);
> > + if (!ts->max_report_len || !ts->devinfo.num_usages)
> > + return -EINVAL;
> > +
> > + dev_dbg(ts->dev, "Max Report Length: %u\n", ts->max_report_len);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Support function to axiom_process_u41_report.
> > + * Generates input-subsystem events for every target.
> > + * After calling this function the caller shall issue
> > + * a Sync to the input sub-system.
> > + */
> > +static bool axiom_process_u41_report_target(struct axiom_data *ts,
> > + struct axiom_target_report *target)
> > +{
> > + struct input_dev *input_dev = ts->input_dev;
> > + struct axiom_u41_target *target_prev_state;
> > + enum axiom_target_state current_state;
> > + bool update = false;
> > + int slot;
> > +
> > + /* Verify the target index */
> > + if (target->index >= AXIOM_U41_MAX_TARGETS) {
> > + dev_dbg(ts->dev, "Invalid target index! %u\n", target->index);
> > + return false;
> > + }
> > +
> > + target_prev_state = &ts->targets[target->index];
> > +
> > + current_state = AXIOM_TARGET_STATE_NOT_PRESENT;
> > +
> > + if (target->present) {
> > + if (target->z >= 0)
> > + current_state = AXIOM_TARGET_STATE_TOUCHING;
> > + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0)
> > + current_state = AXIOM_TARGET_STATE_HOVER;
> > + else if (target->z == AXIOM_PROX_LEVEL)
> > + current_state = AXIOM_TARGET_STATE_PROX;
> > + }
> > +
> > + if (target_prev_state->state == current_state &&
> > + target_prev_state->x == target->x &&
> > + target_prev_state->y == target->y &&
> > + target_prev_state->z == target->z) {
> > + return false;
> > + }
> > +
> > + slot = target->index;
> > +
> > + dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n",
> > + target->index, slot, target->present,
> > + target->x, target->y, target->z);
> > +
> > + switch (current_state) {
> > + case AXIOM_TARGET_STATE_NOT_PRESENT:
> > + case AXIOM_TARGET_STATE_PROX:
> > + if (!target_prev_state->insert)
> > + break;
> > + update = true;
> > + target_prev_state->insert = false;
> > + input_mt_slot(input_dev, slot);
> > +
> > + if (!slot)
> > + input_report_key(input_dev, BTN_TOUCH, 0);
> > +
> > + input_mt_report_slot_inactive(input_dev);
> > + /*
> > + * make sure the previous coordinates are
> > + * all off screen when the finger comes back
> > + */
> > + target->x = 65535;
> > + target->y = 65535;
> > + target->z = AXIOM_PROX_LEVEL;
> > + break;
> > + case AXIOM_TARGET_STATE_HOVER:
> > + case AXIOM_TARGET_STATE_TOUCHING:
> > + target_prev_state->insert = true;
> > + update = true;
> > + input_mt_slot(input_dev, slot);
> > + input_report_abs(input_dev, ABS_MT_TRACKING_ID, slot);
> > + input_report_abs(input_dev, ABS_MT_POSITION_X, target->x);
> > + input_report_abs(input_dev, ABS_X, target->x);
> > + input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y);
> > + input_report_abs(input_dev, ABS_Y, target->y);
> > +
> > + if (current_state == AXIOM_TARGET_STATE_TOUCHING) {
> > + input_report_abs(input_dev, ABS_MT_DISTANCE, 0);
> > + input_report_abs(input_dev, ABS_DISTANCE, 0);
> > + input_report_abs(input_dev, ABS_MT_PRESSURE, target->z);
> > + input_report_abs(input_dev, ABS_PRESSURE, target->z);
> > + } else {
> > + input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z);
> > + input_report_abs(input_dev, ABS_DISTANCE, -target->z);
> > + input_report_abs(input_dev, ABS_MT_PRESSURE, 0);
> > + input_report_abs(input_dev, ABS_PRESSURE, 0);
> > + }
> > +
> > + if (!slot)
> > + input_report_key(input_dev, BTN_TOUCH, (current_state ==
> > + AXIOM_TARGET_STATE_TOUCHING));
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + target_prev_state->state = current_state;
> > + target_prev_state->x = target->x;
> > + target_prev_state->y = target->y;
> > + target_prev_state->z = target->z;
> > +
> > + return update;
> > +}
> > +
> > +/*
> > + * U41 is the output report of the 2D CTS and contains the status of targets
> > + * (including contacts and pre-contacts) along with their X,Y,Z values.
> > + * When a target has been removed (no longer detected),
> > + * the corresponding X,Y,Z values will be zeroed.
> > + */
> > +static bool axiom_process_u41_report(struct axiom_data *ts, char *rx_buf)
> > +{
> > + struct axiom_target_report target;
> > + bool update_done = false;
> > + u16 target_status;
> > + u32 i;
> > +
> > + target_status = ((rx_buf[1]) | (rx_buf[2] << 8));
> > +
> > + for (i = 0; i < AXIOM_U41_MAX_TARGETS; i++) {
> > + char target_step = i * 4;
> > +
> > + target.index = i;
> > + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0;
> > + target.x = (rx_buf[(target_step + 3)] | (rx_buf[target_step + 4] << 8));
> > + target.y = (rx_buf[(target_step + 5)] | (rx_buf[target_step + 6] << 8));
> > + target.z = (s8)(rx_buf[i + 43]);
> > + update_done |= axiom_process_u41_report_target(ts, &target);
> > + }
> > +
> > + return update_done;
> > +}
> > +
> > +/*
> > + * U46 report contains a low level measurement data generated by the CDS
> > + * algorithms from the AUX channels. This information is useful when tuning
> > + * multi-press to assess mechanical consistency in the unit's construction.
> > + */
> > +static void axiom_process_u46_report(struct axiom_data *ts, char *rx_buf)
> > +{
> > + struct input_dev *input_dev = ts->input_dev;
> > + u32 event_value;
> > + u16 aux_value;
> > + u32 i = 0;
> > +
> > + for (i = 0; i < AXIOM_U46_AUX_CHANNELS; i++) {
> > + char target_step = i * 2;
> > +
> > + aux_value = ((rx_buf[target_step + 2] << 8) | (rx_buf[target_step + 1]))
> > + & AXIOM_U46_AUX_MASK;
> > + event_value = (i << 16) | (aux_value);
> > + input_event(input_dev, EV_MSC, MSC_RAW, event_value);
> > + }
> > +}
> > +
> > +/*
> > + * Validates the crc and demultiplexes the axiom reports to the appropriate
> > + * report handler
> > + */
> > +static int axiom_handle_events(struct axiom_data *ts)
> > +{
> > + struct input_dev *input_dev = ts->input_dev;
> > + char *report_data = ts->rx_buf;
> > + char report_len;
> > + struct device *dev = ts->dev;
> > + u16 crc_report;
> > + u16 crc_calc;
> > + int error;
> > +
> > + error = axiom_i2c_read(ts->client, AXIOM_REPORT_USAGE_ID, 0, &report_len,
> > + sizeof(report_len));
>
> I know that I told you it would be better to do the read report in 2
> phases, but we should have stick to Touchnetix recommendation that is to
> read the whole report even if it's padded with zeroes.
> This is to avoid the 250 usecs delay after the read of the report length.
>
Ack, thanks.
> > + if (error)
> > + return error;
> > +
> > + report_len = (report_len & AXIOM_COMMS_REPORT_LEN_MASK) << 1;
> > + if (!report_len) {
> > + dev_err(dev, "Zero length report discarded\n");
> > + return -ENODATA;
> > + }
> > +
> > + error = axiom_i2c_read(ts->client, AXIOM_REPORT_USAGE_ID, 0, report_data, report_len);
> > + if (error)
> > + return error;
> > +
> > + /* Validate the report CRC */
> > + crc_report = (report_data[report_len - 1] << 8) | (report_data[report_len - 2]);
> > + /* Length is in 16 bit words and remove the size of the CRC16 itself */
> > + crc_calc = crc16(0, report_data, (report_len - 2));
> > +
> > + if (crc_calc != crc_report) {
> > + dev_err(dev,
> > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n",
> > + crc_report, crc_calc);
> > + return -EINVAL;
> > + }
> > +
> > + switch (report_data[1]) {
> > + case AXIOM_USAGE_2DCTS_REPORT_ID:
> > + if (axiom_process_u41_report(ts, &report_data[1])) {
> > + input_mt_sync_frame(input_dev);
> > + input_sync(input_dev);
> > + }
> > + break;
> > +
> > + case AXIOM_USAGE_2AUX_REPORT_ID:
> > + /* This is an aux report (force) */
> > + axiom_process_u46_report(ts, &report_data[1]);
> > + input_mt_sync(input_dev);
> > + input_sync(input_dev);
> > + break;
> > +
> > + case AXIOM_USAGE_2HB_REPORT_ID:
> > + /* This is a heartbeat report */
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void axiom_i2c_poll(struct input_dev *input_dev)
> > +{
> > + struct axiom_data *ts = input_get_drvdata(input_dev);
> > +
> > + axiom_handle_events(ts);
> > +}
> > +
> > +static irqreturn_t axiom_irq(int irq, void *dev_id)
> > +{
> > + struct axiom_data *ts = dev_id;
> > +
> > + axiom_handle_events(ts);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void axiom_reset(struct gpio_desc *reset_gpio)
> > +{
> > + gpiod_set_value_cansleep(reset_gpio, 1);
> > + usleep_range(1000, 2000);
> > + gpiod_set_value_cansleep(reset_gpio, 0);
> > + msleep(110);
> > +}
> > +
> > +static int axiom_i2c_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct input_dev *input_dev;
> > + struct axiom_data *ts;
> > + u32 startup_delay_ms;
> > + u32 poll_interval;
> > + int target;
> > + int error;
> > +
> > + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> > + if (!ts)
> > + return -ENOMEM;
> > +
> > + ts->client = client;
> > + i2c_set_clientdata(client, ts);
> > + ts->dev = dev;
> > +
> > + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > + if (IS_ERR(ts->reset_gpio))
> > + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n");
> > +
> > + if (ts->reset_gpio)
> > + axiom_reset(ts->reset_gpio);
> > +
> > + ts->vddi = devm_regulator_get_optional(dev, "VDDI");
> > + if (!IS_ERR(ts->vddi)) {
> > + error = regulator_enable(ts->vddi);
> > + if (error)
> > + return dev_err_probe(&client->dev, PTR_ERR(ts->vddi),
> > + "Failed to enable VDDI regulator\n");
> > + }
> > +
> > + ts->vdda = devm_regulator_get_optional(dev, "VDDA");
> > + if (!IS_ERR(ts->vdda)) {
> > + error = regulator_enable(ts->vdda);
> > + if (error) {
> > + dev_err(dev, "Failed to get VDDA regulator\n");
> > + regulator_disable(ts->vddi);
> > + return error;
> > + }
> > + if (!device_property_read_u32(dev, "startup-time-ms", &startup_delay_ms))
> > + msleep(startup_delay_ms);
> > + }
> > +
> > + error = axiom_discover(ts);
> > + if (error)
> > + return dev_err_probe(dev, error, "Failed touchscreen discover\n");
> > +
> > + input_dev = devm_input_allocate_device(ts->dev);
> > + if (!input_dev)
> > + return -ENOMEM;
> > +
> > + input_dev->name = "TouchNetix axiom Touchscreen";
> > + input_dev->phys = "input/axiom_ts";
> > +
> > + /* Single Touch */
> > + input_set_abs_params(input_dev, ABS_X, 0, 65535, 0, 0);
> > + input_set_abs_params(input_dev, ABS_Y, 0, 65535, 0, 0);
> > +
> > + /* Multi Touch */
> > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */
> > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0);
> > + /* Min, Max, Fuzz (expected noise in px, try 4?) and Flat */
> > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0);
> > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
> > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0);
> > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0);
> > +
> > + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
> > +
> > + /* Registers the axiom device as a touchscreen instead of a mouse pointer */
> > + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT);
> > + if (error)
> > + return error;
> > +
> > + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */
> > + set_bit(EV_REL, input_dev->evbit);
> > + set_bit(EV_MSC, input_dev->evbit);
> > + /* Declare that we support "RAW" Miscellaneous events */
> > + set_bit(MSC_RAW, input_dev->mscbit);
> > +
> > + ts->input_dev = input_dev;
> > + input_set_drvdata(ts->input_dev, ts);
> > +
> > + /* Ensure that all reports are initialised to not be present. */
> > + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++)
> > + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT;
> > +
> > + error = input_register_device(input_dev);
> > + if (error)
> > + return dev_err_probe(ts->dev, error,
> > + "Could not register with Input Sub-system.\n");
> > +
> > + error = devm_request_threaded_irq(dev, client->irq, NULL,
> > + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts);
> > + if (error < 0) {
> > + dev_warn(dev, "Request irq failed, falling back to polling mode");
> > +
> > + error = input_setup_polling(input_dev, axiom_i2c_poll);
> > + if (error)
> > + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n");
> > +
> > + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval))
> > + input_set_poll_interval(input_dev, poll_interval);
> > + else
> > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id axiom_i2c_id_table[] = {
> > + { "ax54a" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table);
> > +
> > +static const struct of_device_id axiom_i2c_of_match[] = {
> > + { .compatible = "touchnetix,ax54a", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match);
> > +
> > +static struct i2c_driver axiom_i2c_driver = {
> > + .driver = {
> > + .name = "axiom",
> > + .of_match_table = axiom_i2c_of_match,
> > + },
> > + .id_table = axiom_i2c_id_table,
> > + .probe = axiom_i2c_probe,
> > +};
> > +module_i2c_driver(axiom_i2c_driver);
> > +MODULE_AUTHOR("Bart Prescott <bartp@...sheep.co.uk>");
> > +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@...chnetix.com>");
> > +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@...chnetix.com>");
> > +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@...chnetix.com>");
> > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@...tlin.com>");
> > +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.25.1
> >
>
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
Powered by blists - more mailing lists