lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231206141222.52029-2-wahrenst@gmx.net>
Date:   Wed,  6 Dec 2023 15:12:20 +0100
From:   Stefan Wahren <wahrenst@....net>
To:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Stefan Wahren <wahrenst@....net>
Subject: [PATCH V3 1/3] qca_debug: Prevent crash on TX ring changes

The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.

So prevent this by stopping the network traffic handling and
temporary park the SPI thread.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@....net>
---
 drivers/net/ethernet/qualcomm/qca_debug.c |  9 ++++-----
 drivers/net/ethernet/qualcomm/qca_spi.c   | 12 ++++++++++++
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index 6f2fa2a42770..a5445252b0c4 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -263,7 +263,6 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 		     struct kernel_ethtool_ringparam *kernel_ring,
 		     struct netlink_ext_ack *extack)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
 	struct qcaspi *qca = netdev_priv(dev);

 	if ((ring->rx_pending) ||
@@ -271,14 +270,14 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;

-	if (netif_running(dev))
-		ops->ndo_stop(dev);
+	if (qca->spi_thread)
+		kthread_park(qca->spi_thread);

 	qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
 	qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);

-	if (netif_running(dev))
-		ops->ndo_open(dev);
+	if (qca->spi_thread)
+		kthread_unpark(qca->spi_thread);

 	return 0;
 }
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index bec723028e96..b0fad69bb755 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -580,6 +580,18 @@ qcaspi_spi_thread(void *data)
 	netdev_info(qca->net_dev, "SPI thread created\n");
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park()) {
+			netif_tx_disable(qca->net_dev);
+			netif_carrier_off(qca->net_dev);
+			qcaspi_flush_tx_ring(qca);
+			kthread_parkme();
+			if (qca->sync == QCASPI_SYNC_READY) {
+				netif_carrier_on(qca->net_dev);
+				netif_wake_queue(qca->net_dev);
+			}
+			continue;
+		}
+
 		if ((qca->intr_req == qca->intr_svc) &&
 		    !qca->txr.skb[qca->txr.head])
 			schedule();
--
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ