linux-kernel - [PATCH V3 2/3] qca_debug: Fix ethtool -G iface tx behavior

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231206141222.52029-3-wahrenst@gmx.net>
Date:   Wed,  6 Dec 2023 15:12:21 +0100
From:   Stefan Wahren <wahrenst@....net>
To:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Stefan Wahren <wahrenst@....net>
Subject: [PATCH V3 2/3] qca_debug: Fix ethtool -G iface tx behavior

After calling ethtool -g it was not possible to adjust the TX ring
size again:

  # ethtool -g eth1
  Ring parameters for eth1:
  Pre-set maximums:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  Current hardware settings:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  # ethtool -G eth1 tx 8
  netlink error: Invalid argument

The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@...hat.com>
Signed-off-by: Stefan Wahren <wahrenst@....net>
---
 drivers/net/ethernet/qualcomm/qca_debug.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index a5445252b0c4..1822f2ad8f0d 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -30,6 +30,8 @@

 #define QCASPI_MAX_REGS 0x20

+#define QCASPI_RX_MAX_FRAMES 4
+
 static const u16 qcaspi_spi_regs[] = {
 	SPI_REG_BFR_SIZE,
 	SPI_REG_WRBUF_SPC_AVA,
@@ -252,9 +254,9 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 {
 	struct qcaspi *qca = netdev_priv(dev);

-	ring->rx_max_pending = 4;
+	ring->rx_max_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_max_pending = TX_RING_MAX_LEN;
-	ring->rx_pending = 4;
+	ring->rx_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_pending = qca->txr.count;
 }

@@ -265,7 +267,7 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 {
 	struct qcaspi *qca = netdev_priv(dev);

-	if ((ring->rx_pending) ||
+	if (ring->rx_pending != QCASPI_RX_MAX_FRAMES ||
 	    (ring->rx_mini_pending) ||
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;
--
2.34.1