lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8310859.T7Z3S40VBb@archlinux>
Date:   Wed, 13 Dec 2023 21:11:52 +0100
From:   Jernej Škrabec <jernej.skrabec@...il.com>
To:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
        linux-clk@...r.kernel.org,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Samuel Holland <samuel@...lland.org>,
        Maxime Ripard <mripard@...nel.org>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Subject: Re: [PATCH v7 5/7] ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node

On Wednesday, November 22, 2023 3:14:23 PM CET Paul Kocialkowski wrote:
> MIPI CSI-2 is supported on the A83T with a dedicated controller that
> covers both the protocol and D-PHY. It is connected to the only CSI
> receiver with a fwnode graph link. Note that the CSI receiver supports
> both this MIPI CSI-2 source and a parallel source.
> 
> An empty port with a label for the MIPI CSI-2 sensor input is also
> defined for convenience.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>

Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>

Best regards,
Jernej

> ---
>  arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi | 43 +++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
> index 94eb3bfc989e..b74c3f9e6598 100644
> --- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
> @@ -1062,6 +1062,49 @@ csi: camera@...0000 {
>  			clock-names = "bus", "mod", "ram";
>  			resets = <&ccu RST_BUS_CSI>;
>  			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					csi_in_mipi_csi2: endpoint {
> +						remote-endpoint = <&mipi_csi2_out_csi>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mipi_csi2: csi@...1000 {
> +			compatible = "allwinner,sun8i-a83t-mipi-csi2";
> +			reg = <0x01cb1000 0x1000>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_CSI>,
> +				 <&ccu CLK_CSI_SCLK>,
> +				 <&ccu CLK_MIPI_CSI>,
> +				 <&ccu CLK_CSI_MISC>;
> +			clock-names = "bus", "mod", "mipi", "misc";
> +			resets = <&ccu RST_BUS_CSI>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				mipi_csi2_in: port@0 {
> +					reg = <0>;
> +				};
> +
> +				mipi_csi2_out: port@1 {
> +					reg = <1>;
> +
> +					mipi_csi2_out_csi: endpoint {
> +						remote-endpoint = <&csi_in_mipi_csi2>;
> +					};
> +				};
> +			};
>  		};
>  
>  		hdmi: hdmi@...0000 {
> 




Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ