[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1ce43346-3f60-b614-cdcc-7d9db8dec758@mediatek.com>
Date: Fri, 15 Dec 2023 01:54:19 +0800
From: Macpaul Lin <macpaul.lin@...iatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Arnd Bergmann <arnd@...nel.org>, <soc@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Ben Lok <ben.lok@...iatek.com>
CC: Arnd Bergmann <arnd@...db.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <bear.wang@...iatek.com>,
<pablo.sun@...iatek.com>, <wenst@...omium.org>
Subject: Re: [PATCH] arm64: mediatek: remove broken pmic interrupt property
On 12/13/23 19:09, AngeloGioacchino Del Regno wrote:
> Il 12/12/23 22:47, Arnd Bergmann ha scritto:
>> From: Arnd Bergmann <arnd@...db.de>
>>
>> The pmic is connected to the GIC, which uses four-cell interrupt
>> properties,
>> but its interrupt is specified as two-cell that would only make sense
>> for
>> the GPIO irqchip:
>>
>> arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning
>> (interrupts_property): /soc/i2c@...01000/pmic@34:#interrupt-cells:
>> size is (8), expected multiple of 16
>>
>> Remove the interrupt for now to shut up the warning. When someone
>> figures out
>> what the correct interrupt and parent are, we can add it back.
>>
>
> Please, can anyone from MediaTek comment on that?
Sorry for late response, I've just stuck in other tasks and didn't
notice this
patch is for genio-1200-evk. I've tested 6.7-rc1 but I thought it might
be an issue
in origin mt8195.dtsi and not be related to board dts.
> I see a mt6360_pins on PIO:
> pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
> <PINMUX_GPIO128__FUNC_GPIO128>;
>
> ...and that's GPIO128, which may effectively be the IRQ pin for MT6360.
>
> Still, I'm not sure whether the interrupt is on GIC or PIO, please
> clarify,
> otherwise we will have to get this commit upstream.
>
I think it could be solved by adding
'interrupt-parent = <&pio>;' to mt6360 node.
But currently I have no much time to verify it.
I'll try to find some time to find out the solution tomorrow.
> Thanks,
> Angelo
>
>> Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio
>> 1200 EVK board")
>> Signed-off-by: Arnd Bergmann <arnd@...db.de>
>> ---
>> arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 --
>> 1 file changed, 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> index 70b465f7c6a7..a409ef998746 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>> @@ -238,8 +238,6 @@ &i2c6 {
>> mt6360: pmic@34 {
>> compatible = "mediatek,mt6360";
>> reg = <0x34>;
>> - interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
>> - interrupt-names = "IRQB";
>> interrupt-controller;
>> #interrupt-cells = <1>;
>> pinctrl-0 = <&mt6360_pins>;
>
Thanks for pointing out the issue! Let's see if it could be solved by
adding 'interrupt-parents'.
Macpaul Lin
Powered by blists - more mailing lists