[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6a0bc9c2-a9c6-5842-b66a-f9f020bf3aa3@mediatek.com>
Date: Fri, 15 Dec 2023 15:42:08 +0800
From: Macpaul Lin <macpaul.lin@...iatek.com>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
"Arnd Bergmann" <arnd@...nel.org>, <soc@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, Ben Lok <ben.lok@...iatek.com>
CC: Arnd Bergmann <arnd@...db.de>, Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <bear.wang@...iatek.com>,
<pablo.sun@...iatek.com>, <wenst@...omium.org>
Subject: Re: [PATCH] arm64: mediatek: remove broken pmic interrupt property
On 12/15/23 01:54, Macpaul Lin wrote:
> On 12/13/23 19:09, AngeloGioacchino Del Regno wrote:
>
>> Il 12/12/23 22:47, Arnd Bergmann ha scritto:
>>> From: Arnd Bergmann <arnd@...db.de>
>>>
>>> The pmic is connected to the GIC, which uses four-cell interrupt
>>> properties,
>>> but its interrupt is specified as two-cell that would only make
>>> sense for
>>> the GPIO irqchip:
>>>
>>> arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning
>>> (interrupts_property): /soc/i2c@...01000/pmic@34:#interrupt-cells:
>>> size is (8), expected multiple of 16
>>>
>>> Remove the interrupt for now to shut up the warning. When someone
>>> figures out
>>> what the correct interrupt and parent are, we can add it back.
>>>
>>
>> Please, can anyone from MediaTek comment on that?
>
> Sorry for late response, I've just stuck in other tasks and didn't
> notice this
>
> patch is for genio-1200-evk. I've tested 6.7-rc1 but I thought it
> might be an issue
>
> in origin mt8195.dtsi and not be related to board dts.
>
>> I see a mt6360_pins on PIO:
>> pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
>> <PINMUX_GPIO128__FUNC_GPIO128>;
>>
>> ...and that's GPIO128, which may effectively be the IRQ pin for MT6360.
>>
>> Still, I'm not sure whether the interrupt is on GIC or PIO, please
>> clarify,
>> otherwise we will have to get this commit upstream.
>>
> I think it could be solved by adding
>
> 'interrupt-parent = <&pio>;' to mt6360 node.
>
> But currently I have no much time to verify it.
>
> I'll try to find some time to find out the solution tomorrow.
>
>> Thanks,
>> Angelo
>>
>>> Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for
>>> Genio 1200 EVK board")
>>> Signed-off-by: Arnd Bergmann <arnd@...db.de>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 2 --
>>> 1 file changed, 2 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> index 70b465f7c6a7..a409ef998746 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
>>> @@ -238,8 +238,6 @@ &i2c6 {
>>> mt6360: pmic@34 {
>>> compatible = "mediatek,mt6360";
>>> reg = <0x34>;
>>> - interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
>>> - interrupt-names = "IRQB";
>>> interrupt-controller;
>>> #interrupt-cells = <1>;
>>> pinctrl-0 = <&mt6360_pins>;
>>
>
> Thanks for pointing out the issue! Let's see if it could be solved by
> adding 'interrupt-parents'.
>
> Macpaul Lin
I've send a patch to add 'interrupt-parent' for mt6360 and tested with
my local kernel-6.7-rc1.
Link:
https://lore.kernel.org/linux-devicetree/20231215073252.21586-1-macpaul.lin@mediatek.com/
Thanks for Angelo , Arnd, and Chen-yu's reminding.
Best regards,
Macpaul Lin
Powered by blists - more mailing lists