[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231214062847.2215542-7-quic_ipkumar@quicinc.com>
Date: Thu, 14 Dec 2023 11:58:43 +0530
From: Praveenkumar I <quic_ipkumar@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<bhelgaas@...gle.com>, <lpieralisi@...nel.org>, <kw@...ux.com>,
<vkoul@...nel.org>, <kishon@...nel.org>, <mani@...nel.org>,
<quic_nsekar@...cinc.com>, <quic_srichara@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <linux-phy@...ts.infradead.org>
CC: <quic_varada@...cinc.com>, <quic_devipriy@...cinc.com>,
<quic_kathirav@...cinc.com>, <quic_anusha@...cinc.com>
Subject: [PATCH 06/10] phy: qcom: ipq5332: Add support for g3x1 and g3x2 PCIe PHYs
Add support for single-lane and dual-lane PCIe UNIPHY found on
Qualcomm IPQ5332 platform. This UNIPHY is similar to the one
present in Qualcomm IPQ5018.
Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
---
This patch depends on the below series which adds PCIe support in
Qualcomm IPQ5018
https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/
.../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index 9f9a03faf6fa..aa71b85eb50e 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -34,6 +34,10 @@
#define SSCG_CTRL_REG_6 0xb0
#define PCS_INTERNAL_CONTROL_2 0x2d8
+#define PHY_CFG_PLLCFG 0x220
+#define PHY_CFG_EIOS_DTCT_REG 0x3e4
+#define PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME 0x3e8
+
#define PHY_MODE_FIXED 0x1
enum qcom_uniphy_pcie_type {
@@ -112,6 +116,21 @@ static const struct uniphy_regs ipq5018_regs[] = {
},
};
+static const struct uniphy_regs ipq5332_regs[] = {
+ {
+ .offset = PHY_CFG_PLLCFG,
+ .val = 0x30,
+ },
+ {
+ .offset = PHY_CFG_EIOS_DTCT_REG,
+ .val = 0x53ef,
+ },
+ {
+ .offset = PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME,
+ .val = 0xCf,
+ },
+};
+
static const struct uniphy_pcie_data ipq5018_2x2_data = {
.lanes = 2,
.lane_offset = 0x800,
@@ -121,6 +140,23 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = {
.pipe_clk_rate = 125000000,
};
+static const struct uniphy_pcie_data ipq5332_x2_data = {
+ .lanes = 2,
+ .lane_offset = 0x800,
+ .phy_type = PHY_TYPE_PCIE_GEN3,
+ .init_seq = ipq5332_regs,
+ .init_seq_num = ARRAY_SIZE(ipq5332_regs),
+ .pipe_clk_rate = 250000000,
+};
+
+static const struct uniphy_pcie_data ipq5332_x1_data = {
+ .lanes = 1,
+ .phy_type = PHY_TYPE_PCIE_GEN3,
+ .init_seq = ipq5332_regs,
+ .init_seq_num = ARRAY_SIZE(ipq5332_regs),
+ .pipe_clk_rate = 250000000,
+};
+
static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy)
{
const struct uniphy_pcie_data *data = phy->data;
@@ -270,6 +306,14 @@ static const struct of_device_id qcom_uniphy_pcie_id_table[] = {
.compatible = "qcom,ipq5018-uniphy-pcie-gen2x2",
.data = &ipq5018_2x2_data,
},
+ {
+ .compatible = "qcom,ipq5332-uniphy-pcie-gen3x2",
+ .data = &ipq5332_x2_data,
+ },
+ {
+ .compatible = "qcom,ipq5332-uniphy-pcie-gen3x1",
+ .data = &ipq5332_x1_data,
+ },
{ /* Sentinel */ },
};
MODULE_DEVICE_TABLE(of, qcom_uniphy_pcie_id_table);
--
2.34.1
Powered by blists - more mailing lists