lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8ed8450f-a9c7-4e9d-97b8-3d26668c7eb4@quicinc.com>
Date: Mon, 18 Dec 2023 15:27:54 +0530
From: Suraj Jaiswal <quic_jsuraj@...cinc.com>
To: Serge Semin <fancer.lancer@...il.com>
CC: Vinod Koul <vkoul@...nel.org>, Bhupesh Sharma <bhupesh.sharma@...aro.org>,
        Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        "David S. Miller"
	<davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
	<kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu
	<joabreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>, <netdev@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Prasad Sodagudi
	<psodagud@...cinc.com>,
        Andrew Halaney <ahalaney@...hat.com>, Rob Herring
	<robh@...nel.org>,
        <kernel@...cinc.com>
Subject: Re: [PATCH net-next v6 3/3] net: stmmac: Add driver support for
 DWMAC5 common safety IRQ


Hi Serge,
Please find commnet inline & let me know if any further action needed

Thanks
Suraj

On 12/14/2023 8:42 PM, Serge Semin wrote:
> Hi Suraj
> 
> On Tue, Dec 12, 2023 at 05:28:41PM +0530, Suraj Jaiswal wrote:
>> Add support to listen HW safety IRQ like ECC(error
>> correction code), DPP(data path parity), FSM(finite state
>> machine) fault in common IRQ line.
>>
>> Signed-off-by: Suraj Jaiswal <quic_jsuraj@...cinc.com>
>> ---
>>  drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
>>  drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 +++
>>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 21 +++++++++++++++++++
>>  .../ethernet/stmicro/stmmac/stmmac_platform.c |  9 ++++++++
>>  4 files changed, 34 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
>> index 721c1f8e892f..b9233b09b80f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>> @@ -344,6 +344,7 @@ enum request_irq_err {
>>  	REQ_IRQ_ERR_ALL,
>>  	REQ_IRQ_ERR_TX,
>>  	REQ_IRQ_ERR_RX,
>> +	REQ_IRQ_ERR_SFTY,
>>  	REQ_IRQ_ERR_SFTY_UE,
>>  	REQ_IRQ_ERR_SFTY_CE,
>>  	REQ_IRQ_ERR_LPI,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> index 9f89acf31050..ca3d93851bed 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> @@ -31,6 +31,7 @@ struct stmmac_resources {
>>  	int wol_irq;
>>  	int lpi_irq;
>>  	int irq;
>> +	int sfty_irq;
>>  	int sfty_ce_irq;
>>  	int sfty_ue_irq;
>>  	int rx_irq[MTL_MAX_RX_QUEUES];
>> @@ -297,6 +298,7 @@ struct stmmac_priv {
>>  	void __iomem *ptpaddr;
>>  	void __iomem *estaddr;
>>  	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
>> +	int sfty_irq;
>>  	int sfty_ce_irq;
>>  	int sfty_ue_irq;
>>  	int rx_irq[MTL_MAX_RX_QUEUES];
>> @@ -305,6 +307,7 @@ struct stmmac_priv {
>>  	char int_name_mac[IFNAMSIZ + 9];
>>  	char int_name_wol[IFNAMSIZ + 9];
>>  	char int_name_lpi[IFNAMSIZ + 9];
>> +	char int_name_sfty[IFNAMSIZ + 10];
>>  	char int_name_sfty_ce[IFNAMSIZ + 10];
>>  	char int_name_sfty_ue[IFNAMSIZ + 10];
>>  	char int_name_rx_irq[MTL_MAX_TX_QUEUES][IFNAMSIZ + 14];
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 47de466e432c..6cf289f192a7 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
>>  		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
>>  			free_irq(priv->wol_irq, dev);
>>  		fallthrough;
>> +	case REQ_IRQ_ERR_SFTY:
>> +		if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
>> +			free_irq(priv->sfty_irq, dev);
>> +		fallthrough;
>>  	case REQ_IRQ_ERR_WOL:
>>  		free_irq(dev->irq, dev);
>>  		fallthrough;
>> @@ -3759,6 +3763,7 @@ static int stmmac_request_irq_single(struct net_device *dev)
>>  	struct stmmac_priv *priv = netdev_priv(dev);
>>  	enum request_irq_err irq_err;
>>  	int ret;
> 
>> +	char *int_name;
> 
> See my comment below.
> 
>>  
>>  	ret = request_irq(dev->irq, stmmac_interrupt,
>>  			  IRQF_SHARED, dev->name, dev);
>> @@ -3798,6 +3803,20 @@ static int stmmac_request_irq_single(struct net_device *dev)
>>  		}
>>  	}
>>  
> 
>> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
>> +		int_name = priv->int_name_sfty;
>> +		sprintf(int_name, "%s:%s", dev->name, "safety");
>> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
>> +				  0, int_name, dev);
>> +		if (unlikely(ret < 0)) {
>> +			netdev_err(priv->dev,
>> +				   "%s: alloc safety failed %d (error: %d)\n",
>> +				   __func__, priv->sfty_irq, ret);
>> +			irq_err = REQ_IRQ_ERR_SFTY;
>> +			goto irq_error;
>> +		}
>> +	}
>> +
> 
> Omg, I thought this change belonged to stmmac_request_irq_multi_msi().
> My bad, sorry. Please move the code above to
> stmmac_request_irq_multi_msi() and get back the part in
> stmmac_request_irq_single() as it was in v5, but instead of specifying
> "safety" IRQ name use "dev->name" as the rest of similar code snippets
> in here have:
> 
> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> +				  0, dev->name, dev);
> +		if (unlikely(ret < 0)) {
> +			netdev_err(priv->dev,
> +				   "%s: alloc safety failed %d (error: %d)\n",
> +				   __func__, priv->sfty_irq, ret);
> +			irq_err = REQ_IRQ_ERR_SFTY;
> +			goto irq_error;
> +		}
> +	}

<Suraj> We can not use "dev->name" as this is name already used by "stmmac_interrupt" @ https://elixir.bootlin.com/linux/v6.1.68/source/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#L3655.
<
ret = request_irq(dev->irq, stmmac_interrupt,
			  IRQF_SHARED, dev->name, dev);
>
if we are using same "dev->name" while requesting safety IRQ as well then  "/proc/interrupt" will show same name eth0/eth1 for  both "stmmac_interrupt" & "safety interrupt" and by looking at "/proc/interrupt" output we can not say which IRQ is for safety and which is for stmmac_interrupt.
> 
> I guess at some point afterwards we'll need to refactor the IRQs
> request part of this driver: replace stmmac_request_irq_single() body
> with the upper part of the stmmac_request_irq_multi_msi() method and
> then just make the former method being called from the later one...
> 
>>  	return 0;
>>  
>>  irq_error:
>> @@ -7462,8 +7481,10 @@ int stmmac_dvr_probe(struct device *device,
>>  	priv->dev->irq = res->irq;
>>  	priv->wol_irq = res->wol_irq;
>>  	priv->lpi_irq = res->lpi_irq;
>> +	priv->sfty_irq = res->sfty_irq;
>>  	priv->sfty_ce_irq = res->sfty_ce_irq;
>>  	priv->sfty_ue_irq = res->sfty_ue_irq;
> 
>> +
> 
> Please drop this change. The code below is attached to the code above
> because it basically does the same but in the loop. 
<Suraj> below loop code "for (i = 0; i < MTL_MAX_RX_QUEUES; i++) priv->rx_irq[i] = res->rx_irq[i];" is not for rx_irq array and will not help for safety irq.
Let me know if I got your commnet properly .
> 
>>  	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
>>  		priv->rx_irq[i] = res->rx_irq[i];
>>  	for (i = 0; i < MTL_MAX_TX_QUEUES; i++)
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index 1ffde555da47..3808a3225a7d 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -726,6 +726,15 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
>>  		dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
>>  	}
>>  
>> +	stmmac_res->sfty_irq =
>> +		platform_get_irq_byname_optional(pdev, "sfty");
> 
>> +
> 
> Please drop this change too. It's normal to have a method call
> attached to the error check statement especially seeing the rest of
> the similar code snippets are designed that way in this function.
<Suraj> Do you means to remove all below code where we are printing the dev_info() message ?
We added this code similar to LPM code.
> 
> -Serge(y)
> 
>> +	if (stmmac_res->sfty_irq < 0) {
>> +		if (stmmac_res->sfty_irq == -EPROBE_DEFER)
>> +			return -EPROBE_DEFER;
>> +		dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
>> +	}
>> +
>>  	stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
>>  
>>  	return PTR_ERR_OR_ZERO(stmmac_res->addr);
>> -- 
>> 2.25.1
>>
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ