| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5mcon3irbtcvrtwwl46bh66qkixddqtbotswmt4usdbkilatzi@c63klwlos4kf>
Date: Mon, 18 Dec 2023 13:48:34 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Suraj Jaiswal <quic_jsuraj@...cinc.com>
Cc: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com, Prasad Sodagudi <psodagud@...cinc.com>,
Andrew Halaney <ahalaney@...hat.com>, Rob Herring <robh@...nel.org>, kernel@...cinc.com
Subject: Re: [PATCH net-next v6 3/3] net: stmmac: Add driver support for
DWMAC5 common safety IRQ
On Mon, Dec 18, 2023 at 03:27:54PM +0530, Suraj Jaiswal wrote:
>
> Hi Serge,
> Please find commnet inline & let me know if any further action needed
>
> Thanks
> Suraj
>
> On 12/14/2023 8:42 PM, Serge Semin wrote:
> > Hi Suraj
> >
> > On Tue, Dec 12, 2023 at 05:28:41PM +0530, Suraj Jaiswal wrote:
> >> Add support to listen HW safety IRQ like ECC(error
> >> correction code), DPP(data path parity), FSM(finite state
> >> machine) fault in common IRQ line.
> >>
> >> Signed-off-by: Suraj Jaiswal <quic_jsuraj@...cinc.com>
> >> ---
> >> drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
> >> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 +++
> >> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 21 +++++++++++++++++++
> >> .../ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++
> >> 4 files changed, 34 insertions(+)
> >>
> >> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> >> index 721c1f8e892f..b9233b09b80f 100644
> >> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> >> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> >> @@ -344,6 +344,7 @@ enum request_irq_err {
> >> REQ_IRQ_ERR_ALL,
> >> REQ_IRQ_ERR_TX,
> >> REQ_IRQ_ERR_RX,
> >> + REQ_IRQ_ERR_SFTY,
> >> REQ_IRQ_ERR_SFTY_UE,
> >> REQ_IRQ_ERR_SFTY_CE,
> >> REQ_IRQ_ERR_LPI,
> >> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> >> index 9f89acf31050..ca3d93851bed 100644
> >> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> >> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> >> @@ -31,6 +31,7 @@ struct stmmac_resources {
> >> int wol_irq;
> >> int lpi_irq;
> >> int irq;
> >> + int sfty_irq;
> >> int sfty_ce_irq;
> >> int sfty_ue_irq;
> >> int rx_irq[MTL_MAX_RX_QUEUES];
> >> @@ -297,6 +298,7 @@ struct stmmac_priv {
> >> void __iomem *ptpaddr;
> >> void __iomem *estaddr;
> >> unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
> >> + int sfty_irq;
> >> int sfty_ce_irq;
> >> int sfty_ue_irq;
> >> int rx_irq[MTL_MAX_RX_QUEUES];
> >> @@ -305,6 +307,7 @@ struct stmmac_priv {
> >> char int_name_mac[IFNAMSIZ + 9];
> >> char int_name_wol[IFNAMSIZ + 9];
> >> char int_name_lpi[IFNAMSIZ + 9];
> >> + char int_name_sfty[IFNAMSIZ + 10];
> >> char int_name_sfty_ce[IFNAMSIZ + 10];
> >> char int_name_sfty_ue[IFNAMSIZ + 10];
> >> char int_name_rx_irq[MTL_MAX_TX_QUEUES][IFNAMSIZ + 14];
> >> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> >> index 47de466e432c..6cf289f192a7 100644
> >> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> >> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> >> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
> >> if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
> >> free_irq(priv->wol_irq, dev);
> >> fallthrough;
> >> + case REQ_IRQ_ERR_SFTY:
> >> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
> >> + free_irq(priv->sfty_irq, dev);
> >> + fallthrough;
> >> case REQ_IRQ_ERR_WOL:
> >> free_irq(dev->irq, dev);
> >> fallthrough;
> >> @@ -3759,6 +3763,7 @@ static int stmmac_request_irq_single(struct net_device *dev)
> >> struct stmmac_priv *priv = netdev_priv(dev);
> >> enum request_irq_err irq_err;
> >> int ret;
> >
> >> + char *int_name;
> >
> > See my comment below.
> >
> >>
> >> ret = request_irq(dev->irq, stmmac_interrupt,
> >> IRQF_SHARED, dev->name, dev);
> >> @@ -3798,6 +3803,20 @@ static int stmmac_request_irq_single(struct net_device *dev)
> >> }
> >> }
> >>
> >
> >> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> >> + int_name = priv->int_name_sfty;
> >> + sprintf(int_name, "%s:%s", dev->name, "safety");
> >> + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> >> + 0, int_name, dev);
> >> + if (unlikely(ret < 0)) {
> >> + netdev_err(priv->dev,
> >> + "%s: alloc safety failed %d (error: %d)\n",
> >> + __func__, priv->sfty_irq, ret);
> >> + irq_err = REQ_IRQ_ERR_SFTY;
> >> + goto irq_error;
> >> + }
> >> + }
> >> +
> >
> > Omg, I thought this change belonged to stmmac_request_irq_multi_msi().
> > My bad, sorry. Please move the code above to
> > stmmac_request_irq_multi_msi() and get back the part in
> > stmmac_request_irq_single() as it was in v5,
Please note my comment regarding the common safety IRQ being supported
in both stmmac_request_irq_single() and stmmac_request_irq_multi_msi()
methods.
> but instead of specifying
> > "safety" IRQ name use "dev->name" as the rest of similar code snippets
> > in here have:
> >
> > + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> > + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> > + 0, dev->name, dev);
> > + if (unlikely(ret < 0)) {
> > + netdev_err(priv->dev,
> > + "%s: alloc safety failed %d (error: %d)\n",
> > + __func__, priv->sfty_irq, ret);
> > + irq_err = REQ_IRQ_ERR_SFTY;
> > + goto irq_error;
> > + }
> > + }
>
> <Suraj> We can not use "dev->name" as this is name already used by "stmmac_interrupt" @ https://elixir.bootlin.com/linux/v6.1.68/source/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#L3655.
It's not that much of the problem. The main idea is to convert your
solution to following the _local_ coding convention. See, the rest of
the IRQs in stmmac_request_irq_single() are requested with "dev->name"
being specified as the IRQ name (irrespective to having such solution
being not that correct). That's what I was talking about. If you want
the safety IRQ to have an unique name, then please submit this patch
as I suggested above and _then_, on top of it, add a new patch which
would convert the entire stmmac_request_irq_single() method to
creating all IRQ names as it's, for instance, done in
stmmac_request_irq_multi_msi().
> <
> ret = request_irq(dev->irq, stmmac_interrupt,
> IRQF_SHARED, dev->name, dev);
> >
> if we are using same "dev->name" while requesting safety IRQ as well then "/proc/interrupt" will show same name eth0/eth1 for both "stmmac_interrupt" & "safety interrupt" and by looking at "/proc/interrupt" output we can not say which IRQ is for safety and which is for stmmac_interrupt.
Thanks. I am perfectly aware of that. Please see my comment above.
> >
> > I guess at some point afterwards we'll need to refactor the IRQs
> > request part of this driver: replace stmmac_request_irq_single() body
> > with the upper part of the stmmac_request_irq_multi_msi() method and
> > then just make the former method being called from the later one...
> >
> >> return 0;
> >>
> >> irq_error:
> >> @@ -7462,8 +7481,10 @@ int stmmac_dvr_probe(struct device *device,
> >> priv->dev->irq = res->irq;
> >> priv->wol_irq = res->wol_irq;
> >> priv->lpi_irq = res->lpi_irq;
> >> + priv->sfty_irq = res->sfty_irq;
> >> priv->sfty_ce_irq = res->sfty_ce_irq;
> >> priv->sfty_ue_irq = res->sfty_ue_irq;
> >
> >> +
> >
> > Please drop this change. The code below is attached to the code above
> > because it basically does the same but in the loop.
> <Suraj> below loop code "for (i = 0; i < MTL_MAX_RX_QUEUES; i++) priv->rx_irq[i] = res->rx_irq[i];" is not for rx_irq array and will not help for safety irq.
> Let me know if I got your commnet properly .
Sorry, you didn't. My comment concerned the _empty_ line you placed
between the code above and below. You shouldn't have done that.
> >
> >> for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
> >> priv->rx_irq[i] = res->rx_irq[i];
> >> for (i = 0; i < MTL_MAX_TX_QUEUES; i++)
> >> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> >> index 1ffde555da47..3808a3225a7d 100644
> >> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> >> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> >> @@ -726,6 +726,15 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
> >> dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
> >> }
> >>
> >> + stmmac_res->sfty_irq =
> >> + platform_get_irq_byname_optional(pdev, "sfty");
> >
> >> +
> >
> > Please drop this change too. It's normal to have a method call
> > attached to the error check statement especially seeing the rest of
> > the similar code snippets are designed that way in this function.
> <Suraj> Do you means to remove all below code where we are printing the dev_info() message ?
No. I was referring to the _empty_ line between the method above and
the error check code below. It's pointless and at the very least
breaks the local coding convention.
-Serge(y)
> We added this code similar to LPM code.
> >
> > -Serge(y)
> >
> >> + if (stmmac_res->sfty_irq < 0) {
> >> + if (stmmac_res->sfty_irq == -EPROBE_DEFER)
> >> + return -EPROBE_DEFER;
> >> + dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
> >> + }
> >> +
> >> stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
> >>
> >> return PTR_ERR_OR_ZERO(stmmac_res->addr);
> >> --
> >> 2.25.1
> >>
> >>
Powered by blists - more mailing lists