| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231221083622.3445726-5-yuklin.soo@starfivetech.com>
Date: Thu, 21 Dec 2023 16:36:20 +0800
From: Alex Soo <yuklin.soo@...rfivetech.com>
To: Linus Walleij <linus.walleij@...aro.org>, Bartosz Golaszewski
<bartosz.golaszewski@...aro.org>, Hal Feng <hal.feng@...rfivetech.com>, "Ley
Foon Tan" <leyfoon.tan@...rfivetech.com>, Jianlong Huang
<jianlong.huang@...rfivetech.com>, Emil Renner Berthing <kernel@...il.dk>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
"Drew Fustini" <drew@...gleboard.org>
CC: <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-riscv@...ts.infradead.org>, "Paul
Walmsley" <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alex Soo <yuklin.soo@...rfivetech.com>
Subject: [RFC PATCH 4/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_gmac domain
Add pinctrl driver for sys_gmac domain.
Signed-off-by: Alex Soo <yuklin.soo@...rfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@...rfivetech.com>
---
drivers/pinctrl/starfive/Kconfig | 12 ++
drivers/pinctrl/starfive/Makefile | 1 +
.../pinctrl-starfive-jh8100-sys-gmac.c | 164 ++++++++++++++++++
.../starfive/pinctrl-starfive-jh8100.h | 2 +
4 files changed, 179 insertions(+)
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
index d78f161a636c..bb1fb3788d5b 100644
--- a/drivers/pinctrl/starfive/Kconfig
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -82,3 +82,15 @@ config PINCTRL_STARFIVE_JH8100_SYS_WEST
This also provides an interface to the GPIO pins not used by other
peripherals supporting inputs, outputs, configuring pull-up/pull-down
and interrupts on input changes.
+
+config PINCTRL_STARFIVE_JH8100_SYS_GMAC
+ tristate "StarFive JH8100 SoC System IOMUX-GMAC pinctrl and GPIO driver"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ depends on OF
+ select PINCTRL_STARFIVE_JH8100
+ default ARCH_STARFIVE
+ help
+ Say yes here to support system iomux-gmac pin control on the StarFive JH8100 SoC.
+ This also provides a syscon interface to configure the GMAC1 voltage level for RGMII(1.8V
+ 2.5V), GMII(2.5V/3.3V), to configure the SDIO1 voltage level to support the 3.3/1.8V voltage
+ switching in high-speed mode, and configure the GMAC1 network interface and timing (slew rate).
diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
index 784465157ae2..236a693a8aef 100644
--- a/drivers/pinctrl/starfive/Makefile
+++ b/drivers/pinctrl/starfive/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_STARFIVE_JH7110_AON) += pinctrl-starfive-jh7110-aon.o
obj-$(CONFIG_PINCTRL_STARFIVE_JH8100) += pinctrl-starfive-jh8100.o
obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_EAST) += pinctrl-starfive-jh8100-sys-east.o
obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_WEST) += pinctrl-starfive-jh8100-sys-west.o
+obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_GMAC) += pinctrl-starfive-jh8100-sys-gmac.o
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
new file mode 100644
index 000000000000..dbbac86dd265
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Pinctrl / GPIO driver for StarFive JH8100 SoC sys gmac controller
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ * Author: Alex Soo <yuklin.soo@...rfivetech.com>
+ *
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include <dt-bindings/pinctrl/starfive,jh8100-pinctrl.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+#include "../pinmux.h"
+#include "../pinconf.h"
+#include "pinctrl-starfive-jh8100.h"
+
+#define JH8100_SYS_G_NGPIO 0
+#define JH8100_SYS_G_GC_BASE 64
+
+static const struct pinctrl_pin_desc jh8100_sys_gmac_pins[] = {
+ PINCTRL_PIN(PAD_GMAC1_MDC, "SYS_G_GMAC1_MDC"),
+ PINCTRL_PIN(PAD_GMAC1_MDIO, "SYS_G_GMAC1_MDIO"),
+ PINCTRL_PIN(PAD_GMAC1_RXD0, "SYS_G_GMAC1_RXD0"),
+ PINCTRL_PIN(PAD_GMAC1_RXD1, "SYS_G_GMAC1_RXD1"),
+ PINCTRL_PIN(PAD_GMAC1_RXD2, "SYS_G_GMAC1_RXD2"),
+ PINCTRL_PIN(PAD_GMAC1_RXD3, "SYS_G_GMAC1_RXD3"),
+ PINCTRL_PIN(PAD_GMAC1_RXDV, "SYS_G_GMAC1_RXDV"),
+ PINCTRL_PIN(PAD_GMAC1_RXC, "SYS_G_GMAC1_RXC"),
+ PINCTRL_PIN(PAD_GMAC1_TXD0, "SYS_G_GMAC1_TXD0"),
+ PINCTRL_PIN(PAD_GMAC1_TXD1, "SYS_G_GMAC1_TXD1"),
+ PINCTRL_PIN(PAD_GMAC1_TXD2, "SYS_G_GMAC1_TXD2"),
+ PINCTRL_PIN(PAD_GMAC1_TXD3, "SYS_G_GMAC1_TXD3"),
+ PINCTRL_PIN(PAD_GMAC1_TXEN, "SYS_G_GMAC1_TXEN"),
+ PINCTRL_PIN(PAD_GMAC1_TXC, "SYS_G_GMAC1_TXC")
+};
+
+struct jh8100_sys_gmac_func_sel {
+ u16 offset;
+ u8 shift;
+ u8 max;
+};
+
+static const struct jh8100_sys_gmac_func_sel
+ jh8100_sys_gmac_func_sel[ARRAY_SIZE(jh8100_sys_gmac_pins)] = {
+ [PAD_GMAC1_RXC] = { 0x048, 0, 2 },
+};
+
+static void jh8100_sys_gmac_set_function(struct jh8100_pinctrl *sfp,
+ unsigned int pin, u32 func)
+{
+ const struct jh8100_sys_gmac_func_sel *fs = &jh8100_sys_gmac_func_sel[pin];
+ unsigned long flags;
+ void __iomem *reg;
+ u32 mask;
+
+ if (!fs->offset)
+ return;
+
+ if (func > fs->max)
+ return;
+
+ reg = sfp->base + fs->offset;
+ func = func << fs->shift;
+ mask = 0x3U << fs->shift;
+
+ raw_spin_lock_irqsave(&sfp->lock, flags);
+ func |= readl_relaxed(reg) & ~mask;
+ writel_relaxed(func, reg);
+ raw_spin_unlock_irqrestore(&sfp->lock, flags);
+}
+
+static int jh8100_sys_gmac_set_one_pin_mux(struct jh8100_pinctrl *sfp,
+ unsigned int pin,
+ unsigned int din, u32 dout,
+ u32 doen, u32 func)
+{
+ jh8100_sys_gmac_set_function(sfp, pin, func);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int jh8100_sys_gmac_pinctrl_suspend(struct device *dev)
+{
+ struct jh8100_pinctrl *sfp;
+ int i;
+
+ sfp = dev_get_drvdata(dev);
+ if (!sfp)
+ return -EINVAL;
+
+ for (i = 0; i < JH8100_SYS_GMAC_REG_NUM; i++)
+ sfp->jh8100_sys_gmac_regs[i] = readl_relaxed(sfp->base + (i * 4));
+
+ return pinctrl_force_sleep(sfp->pctl);
+}
+
+static int jh8100_sys_gmac_pinctrl_resume(struct device *dev)
+{
+ struct jh8100_pinctrl *sfp;
+ int i;
+
+ sfp = dev_get_drvdata(dev);
+ if (!sfp)
+ return -EINVAL;
+
+ for (i = 0; i < JH8100_SYS_GMAC_REG_NUM; i++)
+ writel_relaxed(sfp->jh8100_sys_gmac_regs[i], sfp->base + (i * 4));
+
+ return pinctrl_force_default(sfp->pctl);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(jh8100_sys_gmac_pinctrl_dev_pm_ops,
+ jh8100_sys_gmac_pinctrl_suspend,
+ jh8100_sys_gmac_pinctrl_resume);
+
+static const struct jh8100_pinctrl_soc_info jh8100_sys_gmac_pinctrl_info = {
+ .pins = jh8100_sys_gmac_pins,
+ .npins = ARRAY_SIZE(jh8100_sys_gmac_pins),
+ .ngpios = JH8100_SYS_G_NGPIO,
+ .gc_base = JH8100_SYS_G_GC_BASE,
+ .jh8100_set_one_pin_mux = jh8100_sys_gmac_set_one_pin_mux,
+};
+
+static const struct of_device_id jh8100_sys_gmac_pinctrl_of_match[] = {
+ {
+ .compatible = "starfive,jh8100-sys-pinctrl-gmac",
+ .data = &jh8100_sys_gmac_pinctrl_info,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh8100_sys_gmac_pinctrl_of_match);
+
+static struct platform_driver jh8100_sys_gmac_pinctrl_driver = {
+ .probe = jh8100_pinctrl_probe,
+ .driver = {
+ .name = "starfive-jh8100-sys-pinctrl-gmac",
+#ifdef CONFIG_PM_SLEEP
+ .pm = &jh8100_sys_gmac_pinctrl_dev_pm_ops,
+#endif
+ .of_match_table = jh8100_sys_gmac_pinctrl_of_match,
+ },
+};
+module_platform_driver(jh8100_sys_gmac_pinctrl_driver);
+
+MODULE_DESCRIPTION("Pinctrl driver for the StarFive JH8100 SoC sys gmac controller");
+MODULE_AUTHOR("Alex Soo <yuklin.soo@...rfivetech.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
index 6264931ddb82..43b62609fa3e 100644
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
@@ -15,6 +15,7 @@
#define JH8100_SYS_WEST_REG_NUM 44
#define JH8100_SYS_EAST_REG_NUM 116
+#define JH8100_SYS_GMAC_REG_NUM 19
struct jh8100_pinctrl {
struct device *dev;
@@ -28,6 +29,7 @@ struct jh8100_pinctrl {
const struct jh8100_pinctrl_soc_info *info;
unsigned int jh8100_sys_west_regs[JH8100_SYS_WEST_REG_NUM];
unsigned int jh8100_sys_east_regs[JH8100_SYS_EAST_REG_NUM];
+ unsigned int jh8100_sys_gmac_regs[JH8100_SYS_GMAC_REG_NUM];
/* wakeup */
int wakeup_gpio;
int wakeup_irq;
--
2.25.1
Powered by blists - more mailing lists