[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b6866ee4-31d9-4404-9bd9-92bc4ab59b8c@linaro.org>
Date: Thu, 21 Dec 2023 13:51:58 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Taniya Das <quic_tdas@...cinc.com>,
Ulf Hansson <ulf.hansson@...aro.org>, Johan Hovold
<johan+linaro@...nel.org>, Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 6/8] arm64: dts: qcom: sa8295p-adp: add max20411
On 21.12.2023 04:50, Bjorn Andersson wrote:
> From: Bjorn Andersson <andersson@...nel.org>
>
> The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
> VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
> bus.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 40 ++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index fd253942e5e5..e16406c9c19d 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -266,6 +266,26 @@ &dispcc1 {
> status = "okay";
> };
>
> +&i2c12 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup1_i2c4_state>;
property-n
property-names
(same below)
> +
> + status = "okay";
> +
> + vdd_gfx: regulator@39 {
> + compatible = "maxim,max20411";
> + reg = <0x39>;
> +
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <968750>;
Is this ever going to be scaled? I suppose you could add some OPP code to
drm/msm and use opp-microvolts.. Or lock this down at min=max
Konrad
Powered by blists - more mailing lists