| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2fad9563-09ee-4017-8a67-5958475d56c8@csgroup.eu>
Date: Thu, 21 Dec 2023 13:57:49 +0000
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: Matthias Schiffer <matthias.schiffer@...tq-group.com>, Michael Ellerman
<mpe@...erman.id.au>
CC: Nicholas Piggin <npiggin@...il.com>, Aneesh Kumar K.V
<aneesh.kumar@...nel.org>, "Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux@...tq-group.com" <linux@...tq-group.com>
Subject: Re: [PATCH] powerpc/6xx: set High BAT Enable flag on G2 cores
Le 21/12/2023 à 13:45, Matthias Schiffer a écrit :
> MMU_FTR_USE_HIGH_BATS is set for G2-based cores (G2_LE, e300cX), but the
> high BATs need to be enabled in HID2 to work. Add register definitions
> and introduce a G2 variant of __setup_cpu_603.
Well spotted.
I have a mpc8321, hence e300c2. I never had the problem you had.
But ... looks like U-boot configuration has CONFIG_HID2_HBE so that's
set by U-boot indeed, that's the reason why I never had that problem.
>
> This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled.
>
> Fixes: e4d6654ebe6e ("powerpc/mm/32s: rework mmu_mapin_ram()")
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
> ---
> arch/powerpc/include/asm/cpu_setup.h | 1 +
> arch/powerpc/include/asm/reg.h | 2 ++
> arch/powerpc/kernel/cpu_setup_6xx.S | 25 ++++++++++++++++++++++-
> arch/powerpc/kernel/cpu_specs_book3s_32.h | 10 ++++-----
> 4 files changed, 32 insertions(+), 6 deletions(-)
>
>
> I have only tested this on the MPC5200B (G2_LE), but according to the
> e300 manual, e300cX cores should behave the same.
>
> The Fixes tag is the best I could come up with - I believe that the
> underlying issue of setting USE_HIGH_BATS without actually enabling them
> is as old as Linux's PowerPC implementation, but the specific code
> causing the boot failure was added in the mentioned commit.
Agreed, before that only BATs 0 to 3 were used anyway.
There was also BAT 4 used by platforms/embedded6xx/wii.c , but that's
probably not a G2 ?
>
> Another issue I found in the code is that
> arch/powerpc/platforms/52xx/lite5200_sleep.S uses the SPRN_HID2 definition
> which does not refer to HID2 on the 5200... but that will be for someone
> else to fix, if there is still anyone left using that platform.
Maybe file an issue for it at https://github.com/linuxppc/issues/issues
if you don't plan to fix it ?
By the way, it looks like the SPRN_HID2 definition we have is very
specific to the IBM 750.
MPC 750 has SPRN_HID2 as 1011 == 0x3f3 like others.
>
>
> diff --git a/arch/powerpc/include/asm/cpu_setup.h b/arch/powerpc/include/asm/cpu_setup.h
> index 30e2fe3895024..68d804e74d221 100644
> --- a/arch/powerpc/include/asm/cpu_setup.h
> +++ b/arch/powerpc/include/asm/cpu_setup.h
> @@ -35,6 +35,7 @@ void __setup_cpu_750fx(unsigned long offset, struct cpu_spec *spec);
> void __setup_cpu_7400(unsigned long offset, struct cpu_spec *spec);
> void __setup_cpu_7410(unsigned long offset, struct cpu_spec *spec);
> void __setup_cpu_745x(unsigned long offset, struct cpu_spec *spec);
> +void __setup_cpu_g2(unsigned long offset, struct cpu_spec *spec);
>
> void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec *spec);
> void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec *spec);
> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> index 4ae4ab9090a2d..f5641fcd1da85 100644
> --- a/arch/powerpc/include/asm/reg.h
> +++ b/arch/powerpc/include/asm/reg.h
> @@ -617,6 +617,8 @@
> #endif
> #define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
Should that HID2 be renamed to SPRN_HID2_750 to avoid confusion ?
> #define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */
> +#define SPRN_HID2_G2 0x3F3 /* G2 HID2 Register */
> +#define HID2_HBE_G2 (1<<18) /* High BAT Enable (G2) */
> #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
> #define SPRN_IABR2 0x3FA /* 83xx */
> #define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
> diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
> index f29ce3dd6140f..c67d32e04df9c 100644
> --- a/arch/powerpc/kernel/cpu_setup_6xx.S
> +++ b/arch/powerpc/kernel/cpu_setup_6xx.S
> @@ -81,6 +81,20 @@ _GLOBAL(__setup_cpu_745x)
> bl setup_745x_specifics
> mtlr r5
> blr
> +_GLOBAL(__setup_cpu_g2)
> + mflr r5
> +BEGIN_MMU_FTR_SECTION
> + li r10,0
> + mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
> +END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
MMU_FTR_NEED_DTLB_SW_LRU is dedicated to e300 core. You should also
remove it from __setup_cpu_603
> +
> +BEGIN_FTR_SECTION
> + bl __init_fpu_registers
> +END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
> + bl setup_common_caches
> + bl setup_g2_hid2
> + mtlr r5
> + blr
>
> /* Enable caches for 603's, 604, 750 & 7400 */
> SYM_FUNC_START_LOCAL(setup_common_caches)
> @@ -115,6 +129,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0)
> blr
> SYM_FUNC_END(setup_604_hid0)
>
> +/* Enable high BATs for G2 (G2_LE, e300cX) */
> +SYM_FUNC_START_LOCAL(setup_g2_hid2)
> + mfspr r11,SPRN_HID2_G2
> + oris r11,r11,HID2_HBE_G2@h
> + mtspr SPRN_HID2_G2,r11
> + sync
> + isync
> + blr
> +SYM_FUNC_END(setup_g2_hid2)
> +
> /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
> * erratas we work around here.
> * Moto MPC710CE.pdf describes them, those are errata
> @@ -495,4 +519,3 @@ _GLOBAL(__restore_cpu_setup)
> mtcr r7
> blr
> _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
> -
> diff --git a/arch/powerpc/kernel/cpu_specs_book3s_32.h b/arch/powerpc/kernel/cpu_specs_book3s_32.h
> index 3714634d194a1..83f054fcf837c 100644
> --- a/arch/powerpc/kernel/cpu_specs_book3s_32.h
> +++ b/arch/powerpc/kernel/cpu_specs_book3s_32.h
> @@ -69,7 +69,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
> .mmu_features = MMU_FTR_USE_HIGH_BATS,
> .icache_bsize = 32,
> .dcache_bsize = 32,
> - .cpu_setup = __setup_cpu_603,
> + .cpu_setup = __setup_cpu_g2,
> .machine_check = machine_check_generic,
> .platform = "ppc603",
> },
> @@ -83,7 +83,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
> .mmu_features = MMU_FTR_USE_HIGH_BATS,
> .icache_bsize = 32,
> .dcache_bsize = 32,
> - .cpu_setup = __setup_cpu_603,
> + .cpu_setup = __setup_cpu_g2,
> .machine_check = machine_check_83xx,
> .platform = "ppc603",
> },
> @@ -96,7 +96,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
> .icache_bsize = 32,
> .dcache_bsize = 32,
> - .cpu_setup = __setup_cpu_603,
> + .cpu_setup = __setup_cpu_g2,
> .machine_check = machine_check_83xx,
> .platform = "ppc603",
> },
> @@ -109,7 +109,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
> .icache_bsize = 32,
> .dcache_bsize = 32,
> - .cpu_setup = __setup_cpu_603,
> + .cpu_setup = __setup_cpu_g2,
> .machine_check = machine_check_83xx,
> .num_pmcs = 4,
> .platform = "ppc603",
> @@ -123,7 +123,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
> .icache_bsize = 32,
> .dcache_bsize = 32,
> - .cpu_setup = __setup_cpu_603,
> + .cpu_setup = __setup_cpu_g2,
> .machine_check = machine_check_83xx,
> .num_pmcs = 4,
> .platform = "ppc603",
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
Powered by blists - more mailing lists