| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231229075739.8328-1-zajec5@gmail.com>
Date: Fri, 29 Dec 2023 08:57:38 +0100
From: Rafał Miłecki <zajec5@...il.com>
To: Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Rafał Miłecki <rafal@...ecki.pl>
Subject: [PATCH 1/2] arm64: dts: mediatek: mt7986: reorder properties
From: Rafał Miłecki <rafal@...ecki.pl>
Use order described as preferred in DTS Coding Style. Mostly just move
"compatible", "reg" and "ranges" properties. In two nodes also move
vendor-prefixed props down.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 67 ++++++++++++-----------
1 file changed, 34 insertions(+), 33 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049953..23feeff881de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -27,34 +27,34 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu1: cpu@1 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu2: cpu@2 {
- device_type = "cpu";
compatible = "arm,cortex-a53";
- enable-method = "psci";
reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
cpu3: cpu@3 {
- device_type = "cpu";
- enable-method = "psci";
compatible = "arm,cortex-a53";
reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
#cooling-cells = <2>;
};
};
@@ -131,22 +131,22 @@ timer {
};
soc {
- #address-cells = <2>;
- #size-cells = <2>;
compatible = "simple-bus";
ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
gic: interrupt-controller@...0000 {
compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
reg = <0 0x0c000000 0 0x10000>, /* GICD */
<0 0x0c080000 0 0x80000>, /* GICR */
<0 0x0c400000 0 0x2000>, /* GICC */
<0 0x0c410000 0 0x1000>, /* GICH */
<0 0x0c420000 0 0x2000>; /* GICV */
+ interrupt-parent = <&gic>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
};
infracfg: infracfg@...01000 {
@@ -311,9 +311,9 @@ i2c0: i2c@...08000 {
spi0: spi@...0a000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100a000 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0 0x1100a000 0 0x100>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_MPLL_D2>,
<&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +325,9 @@ spi0: spi@...0a000 {
spi1: spi@...0b000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ reg = <0 0x1100b000 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0 0x1100b000 0 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_MPLL_D2>,
<&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -389,7 +389,6 @@ mmc0: mmc@...30000 {
};
thermal: thermal@...0c800 {
- #thermal-sensor-cells = <1>;
compatible = "mediatek,mt7986-thermal";
reg = <0 0x1100c800 0 0x800>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -397,30 +396,30 @@ thermal: thermal@...0c800 {
<&infracfg CLK_INFRA_ADC_26M_CK>,
<&infracfg CLK_INFRA_ADC_FRC_CK>;
clock-names = "therm", "auxadc", "adc_32k";
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
nvmem-cells = <&thermal_calibration>;
nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
};
pcie: pcie@...80000 {
compatible = "mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
+ reg = <0x00 0x11280000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ ranges = <0x82000000 0x00 0x20000000 0x00
+ 0x20000000 0x00 0x10000000>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
- reg = <0x00 0x11280000 0x00 0x4000>;
- reg-names = "pcie-mac";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0x00 0x20000000 0x00
- 0x20000000 0x00 0x10000000>;
clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
<&infracfg CLK_INFRA_IPCIE_CK>,
<&infracfg CLK_INFRA_IPCIER_CK>,
<&infracfg CLK_INFRA_IPCIEB_CK>;
clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
- status = "disabled";
phys = <&pcie_port PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
@@ -431,6 +430,8 @@ pcie: pcie@...80000 {
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ status = "disabled";
+
pcie_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -441,9 +442,9 @@ pcie_intc: interrupt-controller {
pcie_phy: t-phy {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
pcie_port: pcie-phy@...00000 {
@@ -468,9 +469,9 @@ thermal_calibration: calib@274 {
usb_phy: t-phy@...10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
+ ranges = <0 0 0x11e10000 0x1700>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0x11e10000 0x1700>;
status = "disabled";
u2port0: usb-phy@0 {
@@ -498,11 +499,11 @@ u2port1: usb-phy@...0 {
};
ethsys: syscon@...00000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7986-ethsys",
"syscon";
reg = <0 0x15000000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -579,26 +580,26 @@ eth: ethernet@...00000 {
<&topckgen CLK_TOP_SGM_325M_SEL>;
assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
<&apmixedsys CLK_APMIXED_SGMPLL>;
+ #reset-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
mediatek,ethsys = <ðsys>;
mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
mediatek,wed-pcie = <&wed_pcie>;
mediatek,wed = <&wed0>, <&wed1>;
- #reset-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
wifi: wifi@...00000 {
compatible = "mediatek,mt7986-wmac";
+ reg = <0 0x18000000 0 0x1000000>,
+ <0 0x10003000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>;
resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
reset-names = "consys";
clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
<&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
clock-names = "mcu", "ap2conn";
- reg = <0 0x18000000 0 0x1000000>,
- <0 0x10003000 0 0x1000>,
- <0 0x11d10000 0 0x1000>;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
--
2.35.3
Powered by blists - more mailing lists