lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d7e7b133-d373-e850-1f5f-deee8aa86958@linux.intel.com>
Date: Wed, 3 Jan 2024 17:41:10 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Bjorn Helgaas <helgaas@...nel.org>
cc: Michael Schaller <michael@...aller.de>, bhelgaas@...gle.com, 
    kai.heng.feng@...onical.com, linux-pci@...r.kernel.org, 
    LKML <linux-kernel@...r.kernel.org>, regressions@...ts.linux.dev, 
    macro@...am.me.uk, ajayagarwal@...gle.com, 
    sathyanarayanan.kuppuswamy@...ux.intel.com, 
    Greg Kroah-Hartman <gregkh@...uxfoundation.org>, hkallweit1@...il.com, 
    michael.a.bottini@...ux.intel.com, johan+linaro@...nel.org
Subject: Re: [Regression] [PCI/ASPM] [ASUS PN51] Reboot on resume attempt
 (bisect done; commit found)

On Mon, 1 Jan 2024, Bjorn Helgaas wrote:

> On Mon, Dec 25, 2023 at 07:29:02PM +0100, Michael Schaller wrote:
> > Issue:
> > On resume from suspend to RAM there is no output for about 12 seconds, then
> > shortly a blinking cursor is visible in the upper left corner on an
> > otherwise black screen which is followed by a reboot.
> > 
> > Setup:
> > * Machine: ASUS mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1)
> > * Firmware: 0508 (latest; also tested previous 0505)
> > * OS: Ubuntu 23.10 (except kernel)
> > * Kernel: 6.6.8 (also tested 6.7-rc7; config attached)
> > 
> > Debugging summary:
> > * Kernel 5.10.205 isn’t affected.
> > * Bisect identified commit 08d0cc5f34265d1a1e3031f319f594bd1970976c as
> > cause.
> > * PCI device 0000:03:00.0 (Intel 8265 Wifi) causes resume issues as long as
> > ASPM is enabled (default).
> > * The commit message indicates that a quirk could be written to mitigate the
> > issue but I don’t know how to write such a quirk.
> > 
> > Confirmed workarounds:
> > * Connect a USB flash drive (no clue why; maybe this causes a delay that
> > lets the resume succeed)
> > * Revert commit 08d0cc5f34265d1a1e3031f319f594bd1970976c (commit seemed
> > intentional; a quirk seems to be the preferred solution)
> > * pcie_aspm=off
> > * pcie_aspm.policy=performance
> > * echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm
> > 
> > Debugging details:
> > * The resume trigger (power button, keyboard, mouse) doesn’t seem to make
> > any difference.
> > * Double checked that the kernel is configured to *not* reboot on panic.
> > * Double checked that there still isn't any kernel output without quiet and
> > splash.
> > * The issue doesn’t happen if a USB flash drive is connected. The content of
> > the flash drive doesn’t appear to matter. The USB port doesn’t appear to
> > matter.
> > * No information in any logs after the reboot. I suspect the resume from
> > suspend to RAM isn’t getting far enough as that logs could be written.
> > * Kernel 5.10.205 isn’t affected. Kernel 5.15.145, 6.6.8 and 6.7-rc7 are
> > affected.
> > * A kernel bisect has revealed the following commit as cause:
> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=08d0cc5f34265d1a1e3031f319f594bd1970976c
> > * The commit was part of kernel 5.20 and has been backported to 5.15.
> > * The commit mentions that a device-specific quirk could be added in case of
> > new issues.
> > * According to sysfs and lspci only device 0000:03:00.0 (Intel 8265 Wifi)
> > has ASPM enabled by default.
> > * Disabling ASPM for device 0000:03:00.0 lets the resume from suspend to RAM
> > succeed.
> > * Enabling ASPM for all devices except 0000:03:00.0 lets the resume from
> > suspend to RAM succeed.
> > * This would indicate that a quirk is missing for the device 0000:03:00.0
> > (Intel 8265 Wifi) but I have no clue how to write such a quirk or how to get
> > the specifics for such a quirk.
> > * I still have no clue how a USB flash drive plays into all this. Maybe some
> > kind of a timing issue where the connected USB flash drive delays something
> > long enough so that the resume succeeds. Maybe the code removed by commit
> > 08d0cc5f34265d1a1e3031f319f594bd1970976c caused a similar delay. ¯\_(ツ)_/¯
> 
> Hmmm.  08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
> appeared in v6.0, released Oct 2, 2022, so it's been there a while.
> 
> But I think the best option is to revert it until this issue is
> resolved.  Per the commit log, 08d0cc5f3426 solved two problems:
> 
>   1) ASPM config changes done via sysfs are lost if the device power
>      state is changed, e.g., typically set to D3hot in .suspend() and
>      D0 in .resume().
> 
>   2) If L1SS is restored during system resume, that restored state
>      would be overwritten.
> 
> Problem 2) relates to a patch that is currently reverted (a7152be79b62
> ("Revert "PCI/ASPM: Save L1 PM Substates Capability for
> suspend/resume""), so I don't think reverting 08d0cc5f3426 will make
> this problem worse.
> 
> Reverting 08d0cc5f3426 will make 1) a problem again.  But my guess is
> ASPM changes via sysfs are fairly unusual and the device probably
> remains functional even though it may use more power because the ASPM
> configuration was lost.
> 
> So unless somebody has a counter-argument, I plan to queue a revert of
> 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") for
> v6.7.

Hi,

I cannot understand how 1) even occurs. AFAICT, nothing 
pcie_aspm_pm_state_change() calls into overwrites link->aspm_disable that 
is the variable storing user inputs via sysfs. So how the changes via 
sysfs are lost?

-- 
 i.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ