linux-kernel - Re: [PATCH] arm64: dts: qcom: ipq6018: add #power-domain-cells for gcc node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Thu, 4 Jan 2024 11:32:48 +0100
From: Robert Marko <robimarko@...il.com>
To: Konrad Dybcio <konrad.dybcio@...aro.org>,
 Fenglin Wu <quic_fenglinw@...cinc.com>,
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, quic_tdas@...cinc.com,
 quic_aiquny@...cinc.com
Cc: kernel@...cinc.com, Andy Gross <agross@...nel.org>,
 Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh+dt@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: ipq6018: add #power-domain-cells for
 gcc node


On 04. 01. 2024. 11:16, Konrad Dybcio wrote:
> On 4.01.2024 11:13, Fenglin Wu wrote:
>>
>> On 1/4/2024 5:53 PM, Dmitry Baryshkov wrote:
>>> On Thu, 4 Jan 2024 at 10:06, Fenglin Wu via B4 Relay
>>> <devnull+quic_fenglinw.quicinc.com@...nel.org> wrote:
>>>> From: Fenglin Wu <quic_fenglinw@...cinc.com>
>>>>
>>>> Property '#power-domain-cells' is required as per defined in qcom,gcc.yaml
>>>> so add it for ipq6018 gcc device node to eliminate following warning in
>>>> dtbs_check:
>>>>
>>>> arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: gcc@...0000:
>>>>           '#power-domain-cells' is a required property
>>>> from schema $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#
>>> But ipq6018 doesn't implement GDSC support. So for the sake of fixing
>>> the warning you are adding a bogus property.
>>>
>> I agree. However, there are also some gcc drivers not implementing GDSC support but the bindings are adding '#power-domain-cells' in the DT example, such as: qcom,gcc-apq8064.yaml, qcom,gcc-ipq4019.yaml, qcom,gcc-ipq6018.yaml, qcom,gcc-ipq8064.yaml, qcom,gcc-msm8660.yaml.
>>
>> Actually I thought that maybe we should do a clean up by removing '#power-domain-cells' out of the qcom,gcc.yaml binding and only adding it into individual qcom,gcc-xxx.yaml for the driver which has implemented GDSC support. I checked this with Taniya offline, but she prefers only fixing it in ipq6018.dtsi as it doesn't hurt anything by adding the property, and she expects the GDSC support should be existing in most of qcom,gcc drivers especially the newer Qcom chipsets.
> Before we start changing anything, we should assess whether these
> platforms actually have GDSCs within this clock controller block,
> even if they are (currently) not described in the clk driver.
Hi,
IPQ6018 has GDSC-s, at least for the USB-s.
I tried configuring them a while ago, but the USB2.0 GDSC seems to 
either have a HW bug or
it uses some special configuration as its status bits never show that 
its ON [1].

[1] 
https://patchwork.kernel.org/project/linux-arm-msm/patch/20231025104457.628109-2-robimarko@gmail.com/

Regards,
Robert

>
> Konrad